ARM: OMAP2: Fix H4 matrix keyboard warning

Convert to use matrix keyboard to remove the warning
"Please update the board to use matrix-keypad driver".

Based on similar setup in palmtc.c. Note that this
patch is compile tested only because of lack of working
hardware.

Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index c12666ee7017a8880ff9cfd151b9a1e5d7ba77b3..8b351d92a1cce289cf1af4eba51577b788f5b602 100644 (file)
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -34,7 +35,6 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/keypad.h>
 #include <plat/menelaus.h>
 #include <plat/dma.h>
 #include <plat/gpmc.h>
@@ -50,10 +50,8 @@
 
 #define H4_ETHR_GPIO_IRQ               92
 
-static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
-static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
-
-static const unsigned int h4_keymap[] = {
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
+static const uint32_t board_matrix_keys[] = {
        KEY(0, 0, KEY_LEFT),
        KEY(1, 0, KEY_RIGHT),
        KEY(2, 0, KEY_A),
@@ -86,6 +84,71 @@ static const unsigned int h4_keymap[] = {
        KEY(4, 5, KEY_ENTER),
 };
 
+static const struct matrix_keymap_data board_keymap_data = {
+       .keymap                 = board_matrix_keys,
+       .keymap_size            = ARRAY_SIZE(board_matrix_keys),
+};
+
+static unsigned int board_keypad_row_gpios[] = {
+       88, 89, 124, 11, 6, 96
+};
+
+static unsigned int board_keypad_col_gpios[] = {
+       90, 91, 100, 36, 12, 97, 98
+};
+
+static struct matrix_keypad_platform_data board_keypad_platform_data = {
+       .keymap_data    = &board_keymap_data,
+       .row_gpios      = board_keypad_row_gpios,
+       .num_row_gpios  = ARRAY_SIZE(board_keypad_row_gpios),
+       .col_gpios      = board_keypad_col_gpios,
+       .num_col_gpios  = ARRAY_SIZE(board_keypad_col_gpios),
+       .active_low     = 1,
+
+       .debounce_ms            = 20,
+       .col_scan_delay_us      = 5,
+};
+
+static struct platform_device board_keyboard = {
+       .name   = "matrix-keypad",
+       .id     = -1,
+       .dev    = {
+               .platform_data = &board_keypad_platform_data,
+       },
+};
+static void __init board_mkp_init(void)
+{
+       omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
+       omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
+       omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
+       omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
+       if (omap_has_menelaus()) {
+               omap_mux_init_signal("sdrc_a14.gpio0",
+                       OMAP_PULL_ENA | OMAP_PULL_UP);
+               omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
+               omap_mux_init_signal("gpio_98", 0);
+               board_keypad_row_gpios[5] = 0;
+               board_keypad_col_gpios[2] = 15;
+               board_keypad_col_gpios[6] = 18;
+       } else {
+               omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
+               omap_mux_init_signal("gpio_100", 0);
+               omap_mux_init_signal("gpio_98", 0);
+       }
+       omap_mux_init_signal("gpio_90", 0);
+       omap_mux_init_signal("gpio_91", 0);
+       omap_mux_init_signal("gpio_36", 0);
+       omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
+       omap_mux_init_signal("gpio_97", 0);
+
+       platform_device_register(&board_keyboard);
+}
+#else
+static inline void board_mkp_init(void)
+{
+}
+#endif
+
 static struct mtd_partition h4_partitions[] = {
        /* bootloader (U-Boot, etc) in first sector */
        {
@@ -137,31 +200,8 @@ static struct platform_device h4_flash_device = {
        .resource       = &h4_flash_resource,
 };
 
-static const struct matrix_keymap_data h4_keymap_data = {
-       .keymap         = h4_keymap,
-       .keymap_size    = ARRAY_SIZE(h4_keymap),
-};
-
-static struct omap_kp_platform_data h4_kp_data = {
-       .rows           = 6,
-       .cols           = 7,
-       .keymap_data    = &h4_keymap_data,
-       .rep            = true,
-       .row_gpios      = row_gpios,
-       .col_gpios      = col_gpios,
-};
-
-static struct platform_device h4_kp_device = {
-       .name           = "omap-keypad",
-       .id             = -1,
-       .dev            = {
-               .platform_data = &h4_kp_data,
-       },
-};
-
 static struct platform_device *h4_devices[] __initdata = {
        &h4_flash_device,
-       &h4_kp_device,
 };
 
 static struct panel_generic_dpi_data h4_panel_data = {
@@ -336,31 +376,7 @@ static void __init omap_h4_init(void)
         * if not needed.
         */
 
-#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
-       omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
-       omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
-       omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
-       omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
-       if (omap_has_menelaus()) {
-               omap_mux_init_signal("sdrc_a14.gpio0",
-                       OMAP_PULL_ENA | OMAP_PULL_UP);
-               omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
-               omap_mux_init_signal("gpio_98", 0);
-               row_gpios[5] = 0;
-               col_gpios[2] = 15;
-               col_gpios[6] = 18;
-       } else {
-               omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
-               omap_mux_init_signal("gpio_100", 0);
-               omap_mux_init_signal("gpio_98", 0);
-       }
-       omap_mux_init_signal("gpio_90", 0);
-       omap_mux_init_signal("gpio_91", 0);
-       omap_mux_init_signal("gpio_36", 0);
-       omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
-       omap_mux_init_signal("gpio_97", 0);
-#endif
-
+       board_mkp_init();
        i2c_register_board_info(1, h4_i2c_board_info,
                        ARRAY_SIZE(h4_i2c_board_info));