watchdog: sp5100_tco: Write back the original value to reserved bits, instead of...

In case of SP5100 or SB7x0 chipsets, the sp5100_tco module writes zero to
reserved bits. The module, however, shouldn't depend on specific default
value, and should perform a read-merge-write operation for the reserved
bits.

This patch makes the sp5100_tco module perform a read-merge-write operation
on all the chipset (sp5100, sb7x0, sb8x0 or later).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43176
Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>

diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index 5dfe86ebdc8b60f443745bc7217a2a668ba6e00e..e3b8f757d2d3f641810cece7a0423fa268cf2b88 100644 (file)
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -361,7 +361,7 @@ static unsigned char sp5100_tco_setupdevice(void)
 {
        struct pci_dev *dev = NULL;
        const char *dev_name = NULL;
-       u32 val;
+       u32 val, tmp_val;
        u32 index_reg, data_reg, base_addr;
 
        /* Match the PCI device */
@@ -497,31 +497,19 @@ static unsigned char sp5100_tco_setupdevice(void)
                pr_debug("Got 0x%04x from resource tree\n", val);
        }
 
-       /* Restore to the low three bits, if chipset is SB8x0(or later) */
-       if (sp5100_tco_pci->revision >= 0x40) {
-               u8 reserved_bit;
-               outb(base_addr+0, index_reg);
-               reserved_bit = inb(data_reg) & 0x7;
-               val |= (u32)reserved_bit;
-       }
+       /* Restore to the low three bits */
+       outb(base_addr+0, index_reg);
+       tmp_val = val | (inb(data_reg) & 0x7);
 
        /* Re-programming the watchdog timer base address */
        outb(base_addr+0, index_reg);
-       /* Low three bits of BASE are reserved */
-       outb((val >>  0) & 0xff, data_reg);
+       outb((tmp_val >>  0) & 0xff, data_reg);
        outb(base_addr+1, index_reg);
-       outb((val >>  8) & 0xff, data_reg);
+       outb((tmp_val >>  8) & 0xff, data_reg);
        outb(base_addr+2, index_reg);
-       outb((val >> 16) & 0xff, data_reg);
+       outb((tmp_val >> 16) & 0xff, data_reg);
        outb(base_addr+3, index_reg);
-       outb((val >> 24) & 0xff, data_reg);
-
-       /*
-        * Clear unnecessary the low three bits,
-        * if chipset is SB8x0(or later)
-        */
-       if (sp5100_tco_pci->revision >= 0x40)
-               val &= ~0x7;
+       outb((tmp_val >> 24) & 0xff, data_reg);
 
        if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
                                                                   dev_name)) {