if TCG_TPM
+config TCG_TIS_CORE
+ tristate
+ ---help---
+ TCG TIS TPM core driver. It implements the TPM TCG TIS logic and hooks
+ into the TPM kernel APIs. Physical layers will register against it.
+
config TCG_TIS
tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface"
depends on X86
+ select TCG_TIS_CORE
---help---
If you have a TPM security chip that is compliant with the
TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
tpm-y += tpm_eventlog.o tpm_of.o
endif
endif
+obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o
obj-$(CONFIG_TCG_TIS) += tpm_tis.o
obj-$(CONFIG_TCG_TIS_I2C_ATMEL) += tpm_i2c_atmel.o
obj-$(CONFIG_TCG_TIS_I2C_INFINEON) += tpm_i2c_infineon.o
#include "tpm.h"
#include "tpm_tis_core.h"
-enum tis_access {
- TPM_ACCESS_VALID = 0x80,
- TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
- TPM_ACCESS_REQUEST_PENDING = 0x04,
- TPM_ACCESS_REQUEST_USE = 0x02,
-};
-
-enum tis_status {
- TPM_STS_VALID = 0x80,
- TPM_STS_COMMAND_READY = 0x40,
- TPM_STS_GO = 0x20,
- TPM_STS_DATA_AVAIL = 0x10,
- TPM_STS_DATA_EXPECT = 0x08,
-};
-
-enum tis_int_flags {
- TPM_GLOBAL_INT_ENABLE = 0x80000000,
- TPM_INTF_BURST_COUNT_STATIC = 0x100,
- TPM_INTF_CMD_READY_INT = 0x080,
- TPM_INTF_INT_EDGE_FALLING = 0x040,
- TPM_INTF_INT_EDGE_RISING = 0x020,
- TPM_INTF_INT_LEVEL_LOW = 0x010,
- TPM_INTF_INT_LEVEL_HIGH = 0x008,
- TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
- TPM_INTF_STS_VALID_INT = 0x002,
- TPM_INTF_DATA_AVAIL_INT = 0x001,
-};
-
-enum tis_defaults {
- TIS_MEM_LEN = 0x5000,
- TIS_SHORT_TIMEOUT = 750, /* ms */
- TIS_LONG_TIMEOUT = 2000, /* 2 sec */
-};
-
struct tpm_info {
struct resource res;
/* irq > 0 means: use irq $irq;
int irq;
};
-/* Some timeout values are needed before it is known whether the chip is
- * TPM 1.0 or TPM 2.0.
- */
-#define TIS_TIMEOUT_A_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_A)
-#define TIS_TIMEOUT_B_MAX max(TIS_LONG_TIMEOUT, TPM2_TIMEOUT_B)
-#define TIS_TIMEOUT_C_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_C)
-#define TIS_TIMEOUT_D_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_D)
-
-#define TPM_ACCESS(l) (0x0000 | ((l) << 12))
-#define TPM_INT_ENABLE(l) (0x0008 | ((l) << 12))
-#define TPM_INT_VECTOR(l) (0x000C | ((l) << 12))
-#define TPM_INT_STATUS(l) (0x0010 | ((l) << 12))
-#define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
-#define TPM_STS(l) (0x0018 | ((l) << 12))
-#define TPM_STS3(l) (0x001b | ((l) << 12))
-#define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
-
-#define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
-#define TPM_RID(l) (0x0F04 | ((l) << 12))
-
struct tpm_tis_tcg_phy {
struct tpm_tis_data priv;
void __iomem *iobase;
return container_of(data, struct tpm_tis_tcg_phy, priv);
}
+static bool interrupts = true;
+module_param(interrupts, bool, 0444);
+MODULE_PARM_DESC(interrupts, "Enable interrupts");
+
+static bool itpm;
+module_param(itpm, bool, 0444);
+MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
+
+static bool force;
+#ifdef CONFIG_X86
+module_param(force, bool, 0444);
+MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
+#endif
+
#if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
static int has_hid(struct acpi_device *dev, const char *hid)
{
}
#endif
-/* Before we attempt to access the TPM we must see that the valid bit is set.
- * The specification says that this bit is 0 at reset and remains 0 until the
- * 'TPM has gone through its self test and initialization and has established
- * correct values in the other bits.' */
-static int wait_startup(struct tpm_chip *chip, int l)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- unsigned long stop = jiffies + chip->timeout_a;
- int rc;
- u8 access;
-
- do {
- rc = tpm_tis_read8(priv, TPM_ACCESS(l), &access);
- if (rc < 0)
- return rc;
-
- if (access & TPM_ACCESS_VALID)
- return 0;
- msleep(TPM_TIMEOUT);
- } while (time_before(jiffies, stop));
- return -1;
-}
-
-static int check_locality(struct tpm_chip *chip, int l)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int rc;
- u8 access;
-
- rc = tpm_tis_read8(priv, TPM_ACCESS(l), &access);
- if (rc < 0)
- return rc;
-
- if ((access & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
- (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
- return priv->locality = l;
-
- return -1;
-}
-
-static void release_locality(struct tpm_chip *chip, int l, int force)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int rc;
- u8 access;
-
- rc = tpm_tis_read8(priv, TPM_ACCESS(l), &access);
- if (rc < 0)
- return;
-
- if (force || (access &
- (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) ==
- (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID))
- tpm_tis_write8(priv, TPM_ACCESS(l), TPM_ACCESS_ACTIVE_LOCALITY);
-
-}
-
-static int request_locality(struct tpm_chip *chip, int l)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- unsigned long stop, timeout;
- long rc;
-
- if (check_locality(chip, l) >= 0)
- return l;
-
- rc = tpm_tis_write8(priv, TPM_ACCESS(l), TPM_ACCESS_REQUEST_USE);
- if (rc < 0)
- return rc;
-
- stop = jiffies + chip->timeout_a;
-
- if (chip->flags & TPM_CHIP_FLAG_IRQ) {
-again:
- timeout = stop - jiffies;
- if ((long)timeout <= 0)
- return -1;
- rc = wait_event_interruptible_timeout(priv->int_queue,
- (check_locality
- (chip, l) >= 0),
- timeout);
- if (rc > 0)
- return l;
- if (rc == -ERESTARTSYS && freezing(current)) {
- clear_thread_flag(TIF_SIGPENDING);
- goto again;
- }
- } else {
- /* wait for burstcount */
- do {
- if (check_locality(chip, l) >= 0)
- return l;
- msleep(TPM_TIMEOUT);
- }
- while (time_before(jiffies, stop));
- }
- return -1;
-}
-
-static u8 tpm_tis_status(struct tpm_chip *chip)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int rc;
- u8 status;
-
- rc = tpm_tis_read8(priv, TPM_STS(priv->locality), &status);
- if (rc < 0)
- return 0;
-
- return status;
-}
-
-static void tpm_tis_ready(struct tpm_chip *chip)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
-
- /* this causes the current command to be aborted */
- tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_COMMAND_READY);
-}
-
-static int get_burstcount(struct tpm_chip *chip)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- unsigned long stop;
- int burstcnt, rc;
- u8 value;
-
- /* wait for burstcount */
- /* which timeout value, spec has 2 answers (c & d) */
- stop = jiffies + chip->timeout_d;
- do {
- rc = tpm_tis_read8(priv, TPM_STS(priv->locality) + 1, &value);
- if (rc < 0)
- return rc;
-
- burstcnt = value;
- rc = tpm_tis_read8(priv, TPM_STS(priv->locality) + 2, &value);
- if (rc < 0)
- return rc;
-
- burstcnt += value << 8;
- if (burstcnt)
- return burstcnt;
- msleep(TPM_TIMEOUT);
- } while (time_before(jiffies, stop));
- return -EBUSY;
-}
-
-static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int size = 0, burstcnt, rc;
-
- while (size < count &&
- wait_for_tpm_stat(chip,
- TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- chip->timeout_c,
- &priv->read_queue, true) == 0) {
- burstcnt = min_t(int, get_burstcount(chip), count - size);
- rc = tpm_tis_read_bytes(priv, TPM_DATA_FIFO(priv->locality),
- burstcnt, buf + size);
- if (rc < 0)
- return rc;
-
- size += burstcnt;
- }
- return size;
-}
-
-static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int size = 0;
- int expected, status;
-
- if (count < TPM_HEADER_SIZE) {
- size = -EIO;
- goto out;
- }
-
- /* read first 10 bytes, including tag, paramsize, and result */
- if ((size =
- recv_data(chip, buf, TPM_HEADER_SIZE)) < TPM_HEADER_SIZE) {
- dev_err(&chip->dev, "Unable to read header\n");
- goto out;
- }
-
- expected = be32_to_cpu(*(__be32 *) (buf + 2));
- if (expected > count) {
- size = -EIO;
- goto out;
- }
-
- if ((size +=
- recv_data(chip, &buf[TPM_HEADER_SIZE],
- expected - TPM_HEADER_SIZE)) < expected) {
- dev_err(&chip->dev, "Unable to read remainder of result\n");
- size = -ETIME;
- goto out;
- }
-
- wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
- &priv->int_queue, false);
- status = tpm_tis_status(chip);
- if (status & TPM_STS_DATA_AVAIL) { /* retry? */
- dev_err(&chip->dev, "Error left over data\n");
- size = -EIO;
- goto out;
- }
-
-out:
- tpm_tis_ready(chip);
- release_locality(chip, priv->locality, 0);
- return size;
-}
-
-static bool itpm;
-module_param(itpm, bool, 0444);
-MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
-
-/*
- * If interrupts are used (signaled by an irq set in the vendor structure)
- * tpm.c can skip polling for the data to be available as the interrupt is
- * waited for here
- */
-static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int rc, status, burstcnt;
- size_t count = 0;
-
- if (request_locality(chip, 0) < 0)
- return -EBUSY;
-
- status = tpm_tis_status(chip);
- if ((status & TPM_STS_COMMAND_READY) == 0) {
- tpm_tis_ready(chip);
- if (wait_for_tpm_stat
- (chip, TPM_STS_COMMAND_READY, chip->timeout_b,
- &priv->int_queue, false) < 0) {
- rc = -ETIME;
- goto out_err;
- }
- }
-
- while (count < len - 1) {
- burstcnt = min_t(int, get_burstcount(chip), len - count - 1);
- rc = tpm_tis_write_bytes(priv, TPM_DATA_FIFO(priv->locality),
- burstcnt, buf + count);
- if (rc < 0)
- goto out_err;
-
- count += burstcnt;
-
- wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
- &priv->int_queue, false);
- status = tpm_tis_status(chip);
- if (!itpm && (status & TPM_STS_DATA_EXPECT) == 0) {
- rc = -EIO;
- goto out_err;
- }
- }
-
- /* write last byte */
- rc = tpm_tis_write8(priv, TPM_DATA_FIFO(priv->locality), buf[count]);
- if (rc < 0)
- goto out_err;
-
- wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
- &priv->int_queue, false);
- status = tpm_tis_status(chip);
- if ((status & TPM_STS_DATA_EXPECT) != 0) {
- rc = -EIO;
- goto out_err;
- }
-
- return 0;
-
-out_err:
- tpm_tis_ready(chip);
- release_locality(chip, priv->locality, 0);
- return rc;
-}
-
-static void disable_interrupts(struct tpm_chip *chip)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- u32 intmask;
- int rc;
-
- rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
- if (rc < 0)
- intmask = 0;
-
- intmask &= ~TPM_GLOBAL_INT_ENABLE;
- tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
-
- devm_free_irq(chip->dev.parent, priv->irq, chip);
- priv->irq = 0;
- chip->flags &= ~TPM_CHIP_FLAG_IRQ;
-}
-
-/*
- * If interrupts are used (signaled by an irq set in the vendor structure)
- * tpm.c can skip polling for the data to be available as the interrupt is
- * waited for here
- */
-static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int rc;
- u32 ordinal;
- unsigned long dur;
-
- rc = tpm_tis_send_data(chip, buf, len);
- if (rc < 0)
- return rc;
-
- /* go and do it */
- rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
- if (rc < 0)
- return rc;
-
- if (chip->flags & TPM_CHIP_FLAG_IRQ) {
- ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
-
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- dur = tpm2_calc_ordinal_duration(chip, ordinal);
- else
- dur = tpm_calc_ordinal_duration(chip, ordinal);
-
- if (wait_for_tpm_stat
- (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
- &priv->read_queue, false) < 0) {
- rc = -ETIME;
- goto out_err;
- }
- }
- return len;
-out_err:
- tpm_tis_ready(chip);
- release_locality(chip, priv->locality, 0);
- return rc;
-}
-
-static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int rc, irq;
-
- if (!(chip->flags & TPM_CHIP_FLAG_IRQ) || priv->irq_tested)
- return tpm_tis_send_main(chip, buf, len);
-
- /* Verify receipt of the expected IRQ */
- irq = priv->irq;
- priv->irq = 0;
- chip->flags &= ~TPM_CHIP_FLAG_IRQ;
- rc = tpm_tis_send_main(chip, buf, len);
- priv->irq = irq;
- chip->flags |= TPM_CHIP_FLAG_IRQ;
- if (!priv->irq_tested)
- msleep(1);
- if (!priv->irq_tested)
- disable_interrupts(chip);
- priv->irq_tested = true;
- return rc;
-}
-
-struct tis_vendor_timeout_override {
- u32 did_vid;
- unsigned long timeout_us[4];
-};
-
-static const struct tis_vendor_timeout_override vendor_timeout_overrides[] = {
- /* Atmel 3204 */
- { 0x32041114, { (TIS_SHORT_TIMEOUT*1000), (TIS_LONG_TIMEOUT*1000),
- (TIS_SHORT_TIMEOUT*1000), (TIS_SHORT_TIMEOUT*1000) } },
-};
-
-static bool tpm_tis_update_timeouts(struct tpm_chip *chip,
- unsigned long *timeout_cap)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int i, rc;
- u32 did_vid;
-
- rc = tpm_tis_read32(priv, TPM_DID_VID(0), &did_vid);
- if (rc < 0)
- return rc;
-
- for (i = 0; i != ARRAY_SIZE(vendor_timeout_overrides); i++) {
- if (vendor_timeout_overrides[i].did_vid != did_vid)
- continue;
- memcpy(timeout_cap, vendor_timeout_overrides[i].timeout_us,
- sizeof(vendor_timeout_overrides[i].timeout_us));
- return true;
- }
-
- return false;
-}
-
-/*
- * Early probing for iTPM with STS_DATA_EXPECT flaw.
- * Try sending command without itpm flag set and if that
- * fails, repeat with itpm flag set.
- */
-static int probe_itpm(struct tpm_chip *chip)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int rc = 0;
- u8 cmd_getticks[] = {
- 0x00, 0xc1, 0x00, 0x00, 0x00, 0x0a,
- 0x00, 0x00, 0x00, 0xf1
- };
- size_t len = sizeof(cmd_getticks);
- bool rem_itpm = itpm;
- u16 vendor;
-
- rc = tpm_tis_read16(priv, TPM_DID_VID(0), &vendor);
- if (rc < 0)
- return rc;
-
- /* probe only iTPMS */
- if (vendor != TPM_VID_INTEL)
- return 0;
-
- itpm = false;
-
- rc = tpm_tis_send_data(chip, cmd_getticks, len);
- if (rc == 0)
- goto out;
-
- tpm_tis_ready(chip);
- release_locality(chip, priv->locality, 0);
-
- itpm = true;
-
- rc = tpm_tis_send_data(chip, cmd_getticks, len);
- if (rc == 0) {
- dev_info(&chip->dev, "Detected an iTPM.\n");
- rc = 1;
- } else
- rc = -EFAULT;
-
-out:
- itpm = rem_itpm;
- tpm_tis_ready(chip);
- release_locality(chip, priv->locality, 0);
-
- return rc;
-}
-
-static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
-
- switch (priv->manufacturer_id) {
- case TPM_VID_WINBOND:
- return ((status == TPM_STS_VALID) ||
- (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY)));
- case TPM_VID_STM:
- return (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY));
- default:
- return (status == TPM_STS_COMMAND_READY);
- }
-}
-
-static const struct tpm_class_ops tpm_tis = {
- .status = tpm_tis_status,
- .recv = tpm_tis_recv,
- .send = tpm_tis_send,
- .cancel = tpm_tis_ready,
- .update_timeouts = tpm_tis_update_timeouts,
- .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- .req_canceled = tpm_tis_req_canceled,
-};
-
static int tpm_tcg_read_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
u8 *result)
{
.write32 = tpm_tcg_write32,
};
-static irqreturn_t tis_int_handler(int dummy, void *dev_id)
-{
- struct tpm_chip *chip = dev_id;
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- u32 interrupt;
- int i, rc;
-
- rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
- if (rc < 0)
- return IRQ_NONE;
-
- if (interrupt == 0)
- return IRQ_NONE;
-
- priv->irq_tested = true;
- if (interrupt & TPM_INTF_DATA_AVAIL_INT)
- wake_up_interruptible(&priv->read_queue);
- if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
- for (i = 0; i < 5; i++)
- if (check_locality(chip, i) >= 0)
- break;
- if (interrupt &
- (TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT |
- TPM_INTF_CMD_READY_INT))
- wake_up_interruptible(&priv->int_queue);
-
- /* Clear interrupts handled with TPM_EOI */
- rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
- if (rc < 0)
- return IRQ_NONE;
-
- tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
- return IRQ_HANDLED;
-}
-
-/* Register the IRQ and issue a command that will cause an interrupt. If an
- * irq is seen then leave the chip setup for IRQ operation, otherwise reverse
- * everything and leave in polling mode. Returns 0 on success.
- */
-static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
- int flags, int irq)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- u8 original_int_vec;
- int rc;
- u32 int_status;
-
- if (devm_request_irq(chip->dev.parent, irq, tis_int_handler, flags,
- dev_name(&chip->dev), chip) != 0) {
- dev_info(&chip->dev, "Unable to request irq: %d for probe\n",
- irq);
- return -1;
- }
- priv->irq = irq;
-
- rc = tpm_tis_read8(priv, TPM_INT_VECTOR(priv->locality),
- &original_int_vec);
- if (rc < 0)
- return rc;
-
- rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), irq);
- if (rc < 0)
- return rc;
-
- rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &int_status);
- if (rc < 0)
- return rc;
-
- /* Clear all existing */
- rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), int_status);
- if (rc < 0)
- return rc;
-
- /* Turn on */
- rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality),
- intmask | TPM_GLOBAL_INT_ENABLE);
- if (rc < 0)
- return rc;
-
- priv->irq_tested = false;
-
- /* Generate an interrupt by having the core call through to
- * tpm_tis_send
- */
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- tpm2_gen_interrupt(chip);
- else
- tpm_gen_interrupt(chip);
-
- /* tpm_tis_send will either confirm the interrupt is working or it
- * will call disable_irq which undoes all of the above.
- */
- if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) {
- rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality),
- original_int_vec);
- if (rc < 0)
- return rc;
-
- return 1;
- }
-
- return 0;
-}
-
-/* Try to find the IRQ the TPM is using. This is for legacy x86 systems that
- * do not have ACPI/etc. We typically expect the interrupt to be declared if
- * present.
- */
-static void tpm_tis_probe_irq(struct tpm_chip *chip, u32 intmask)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- u8 original_int_vec;
- int i, rc;
-
- rc = tpm_tis_read8(priv, TPM_INT_VECTOR(priv->locality),
- &original_int_vec);
- if (rc < 0)
- return;
-
- if (!original_int_vec) {
- if (IS_ENABLED(CONFIG_X86))
- for (i = 3; i <= 15; i++)
- if (!tpm_tis_probe_irq_single(chip, intmask, 0,
- i))
- return;
- } else if (!tpm_tis_probe_irq_single(chip, intmask, 0,
- original_int_vec))
- return;
-}
-
-static bool interrupts = true;
-module_param(interrupts, bool, 0444);
-MODULE_PARM_DESC(interrupts, "Enable interrupts");
-
-static void tpm_tis_remove(struct tpm_chip *chip)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- u32 reg = TPM_INT_ENABLE(priv->locality);
- u32 interrupt;
- int rc;
-
- rc = tpm_tis_read32(priv, reg, &interrupt);
- if (rc < 0)
- interrupt = 0;
-
- tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
- release_locality(chip, priv->locality, 1);
-}
-
static int tpm_tis_init(struct device *dev, struct tpm_info *tpm_info,
acpi_handle acpi_dev_handle)
{
- u32 vendor, intfcaps, intmask;
- u8 rid;
- int rc, probe;
- struct tpm_chip *chip;
struct tpm_tis_tcg_phy *phy;
+ int irq = -1;
phy = devm_kzalloc(dev, sizeof(struct tpm_tis_tcg_phy), GFP_KERNEL);
if (phy == NULL)
return -ENOMEM;
- chip = tpmm_chip_alloc(dev, &tpm_tis);
- if (IS_ERR(chip))
- return PTR_ERR(chip);
-
-#ifdef CONFIG_ACPI
- chip->acpi_dev_handle = acpi_dev_handle;
-#endif
-
phy->iobase = devm_ioremap_resource(dev, &tpm_info->res);
if (IS_ERR(phy->iobase))
return PTR_ERR(phy->iobase);
- phy->priv.phy_ops = &tpm_tcg;
-
- /* Maximum timeouts */
- chip->timeout_a = TIS_TIMEOUT_A_MAX;
- chip->timeout_b = TIS_TIMEOUT_B_MAX;
- chip->timeout_c = TIS_TIMEOUT_C_MAX;
- chip->timeout_d = TIS_TIMEOUT_D_MAX;
-
- dev_set_drvdata(&chip->dev, &phy->priv);
-
- if (wait_startup(chip, 0) != 0) {
- rc = -ENODEV;
- goto out_err;
- }
-
- /* Take control of the TPM's interrupt hardware and shut it off */
- rc = tpm_tis_read32(&phy->priv, TPM_INT_ENABLE(phy->priv.locality),
- &intmask);
- if (rc < 0)
- goto out_err;
-
- intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
- TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
- intmask &= ~TPM_GLOBAL_INT_ENABLE;
- tpm_tis_write32(&phy->priv, TPM_INT_ENABLE(phy->priv.locality),
- intmask);
-
- if (request_locality(chip, 0) != 0) {
- rc = -ENODEV;
- goto out_err;
- }
-
- rc = tpm2_probe(chip);
- if (rc)
- goto out_err;
-
- rc = tpm_tis_read32(&phy->priv, TPM_DID_VID(0), &vendor);
- if (rc < 0)
- goto out_err;
-
- phy->priv.manufacturer_id = vendor;
-
- rc = tpm_tis_read8(&phy->priv, TPM_RID(0), &rid);
- if (rc < 0)
- goto out_err;
-
- dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
- (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
- vendor >> 16, rid);
-
- if (!itpm) {
- probe = probe_itpm(chip);
- if (probe < 0) {
- rc = -ENODEV;
- goto out_err;
- }
- itpm = !!probe;
- }
+ if (interrupts)
+ irq = tpm_info->irq;
if (itpm)
- dev_info(dev, "Intel iTPM workaround enabled\n");
-
- /* Figure out the capabilities */
- rc = tpm_tis_read32(&phy->priv, TPM_INTF_CAPS(phy->priv.locality),
- &intfcaps);
- if (rc < 0)
- goto out_err;
-
- dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
- intfcaps);
- if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
- dev_dbg(dev, "\tBurst Count Static\n");
- if (intfcaps & TPM_INTF_CMD_READY_INT)
- dev_dbg(dev, "\tCommand Ready Int Support\n");
- if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
- dev_dbg(dev, "\tInterrupt Edge Falling\n");
- if (intfcaps & TPM_INTF_INT_EDGE_RISING)
- dev_dbg(dev, "\tInterrupt Edge Rising\n");
- if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
- dev_dbg(dev, "\tInterrupt Level Low\n");
- if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
- dev_dbg(dev, "\tInterrupt Level High\n");
- if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
- dev_dbg(dev, "\tLocality Change Int Support\n");
- if (intfcaps & TPM_INTF_STS_VALID_INT)
- dev_dbg(dev, "\tSts Valid Int Support\n");
- if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
- dev_dbg(dev, "\tData Avail Int Support\n");
-
- /* Very early on issue a command to the TPM in polling mode to make
- * sure it works. May as well use that command to set the proper
- * timeouts for the driver.
- */
- if (tpm_get_timeouts(chip)) {
- dev_err(dev, "Could not get TPM timeouts and durations\n");
- rc = -ENODEV;
- goto out_err;
- }
+ phy->priv.flags |= TPM_TIS_ITPM_POSSIBLE;
- /* INTERRUPT Setup */
- init_waitqueue_head(&phy->priv.read_queue);
- init_waitqueue_head(&phy->priv.int_queue);
- if (interrupts && tpm_info->irq != -1) {
- if (tpm_info->irq) {
- tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
- tpm_info->irq);
- if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
- dev_err(&chip->dev, FW_BUG
- "TPM interrupt not working, polling instead\n");
- } else
- tpm_tis_probe_irq(chip, intmask);
- }
-
- if (chip->flags & TPM_CHIP_FLAG_TPM2) {
- rc = tpm2_do_selftest(chip);
- if (rc == TPM2_RC_INITIALIZE) {
- dev_warn(dev, "Firmware has not started TPM\n");
- rc = tpm2_startup(chip, TPM2_SU_CLEAR);
- if (!rc)
- rc = tpm2_do_selftest(chip);
- }
-
- if (rc) {
- dev_err(dev, "TPM self test failed\n");
- if (rc > 0)
- rc = -ENODEV;
- goto out_err;
- }
- } else {
- if (tpm_do_selftest(chip)) {
- dev_err(dev, "TPM self test failed\n");
- rc = -ENODEV;
- goto out_err;
- }
- }
-
- return tpm_chip_register(chip);
-out_err:
- tpm_tis_remove(chip);
- return rc;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
-{
- struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- u32 intmask;
- int rc;
-
- /* reenable interrupts that device may have lost or
- BIOS/firmware may have disabled */
- rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), priv->irq);
- if (rc < 0)
- return;
-
- rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
- if (rc < 0)
- return;
-
- intmask |= TPM_INTF_CMD_READY_INT
- | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
- | TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
-
- tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
-}
-
-static int tpm_tis_resume(struct device *dev)
-{
- struct tpm_chip *chip = dev_get_drvdata(dev);
- int ret;
-
- if (chip->flags & TPM_CHIP_FLAG_IRQ)
- tpm_tis_reenable_interrupts(chip);
-
- ret = tpm_pm_resume(dev);
- if (ret)
- return ret;
-
- /* TPM 1.2 requires self-test on resume. This function actually returns
- * an error code but for unknown reason it isn't handled.
- */
- if (!(chip->flags & TPM_CHIP_FLAG_TPM2))
- tpm_do_selftest(chip);
-
- return 0;
+ return tpm_tis_core_init(dev, &phy->priv, irq, &tpm_tcg,
+ acpi_dev_handle);
}
-#endif
static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume);
},
};
-static bool force;
-#ifdef CONFIG_X86
-module_param(force, bool, 0444);
-MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
-#endif
-
static int tpm_tis_force_device(void)
{
struct platform_device *pdev;
--- /dev/null
+/*
+ * Copyright (C) 2005, 2006 IBM Corporation
+ * Copyright (C) 2014, 2015 Intel Corporation
+ *
+ * Authors:
+ * Leendert van Doorn <leendert@watson.ibm.com>
+ * Kylene Hall <kjhall@us.ibm.com>
+ *
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
+ *
+ * Device driver for TCG/TCPA TPM (trusted platform module).
+ * Specifications at www.trustedcomputinggroup.org
+ *
+ * This device driver implements the TPM interface as defined in
+ * the TCG TPM Interface Spec version 1.2, revision 1.0.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pnp.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/acpi.h>
+#include <linux/freezer.h>
+#include "tpm.h"
+#include "tpm_tis_core.h"
+
+/* Before we attempt to access the TPM we must see that the valid bit is set.
+ * The specification says that this bit is 0 at reset and remains 0 until the
+ * 'TPM has gone through its self test and initialization and has established
+ * correct values in the other bits.'
+ */
+static int wait_startup(struct tpm_chip *chip, int l)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ unsigned long stop = jiffies + chip->timeout_a;
+
+ do {
+ int rc;
+ u8 access;
+
+ rc = tpm_tis_read8(priv, TPM_ACCESS(l), &access);
+ if (rc < 0)
+ return rc;
+
+ if (access & TPM_ACCESS_VALID)
+ return 0;
+ msleep(TPM_TIMEOUT);
+ } while (time_before(jiffies, stop));
+ return -1;
+}
+
+static int check_locality(struct tpm_chip *chip, int l)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ int rc;
+ u8 access;
+
+ rc = tpm_tis_read8(priv, TPM_ACCESS(l), &access);
+ if (rc < 0)
+ return rc;
+
+ if ((access & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
+ (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
+ return priv->locality = l;
+
+ return -1;
+}
+
+static void release_locality(struct tpm_chip *chip, int l, int force)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ int rc;
+ u8 access;
+
+ rc = tpm_tis_read8(priv, TPM_ACCESS(l), &access);
+ if (rc < 0)
+ return;
+
+ if (force || (access &
+ (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) ==
+ (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID))
+ tpm_tis_write8(priv, TPM_ACCESS(l), TPM_ACCESS_ACTIVE_LOCALITY);
+
+}
+
+static int request_locality(struct tpm_chip *chip, int l)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ unsigned long stop, timeout;
+ long rc;
+
+ if (check_locality(chip, l) >= 0)
+ return l;
+
+ rc = tpm_tis_write8(priv, TPM_ACCESS(l), TPM_ACCESS_REQUEST_USE);
+ if (rc < 0)
+ return rc;
+
+ stop = jiffies + chip->timeout_a;
+
+ if (chip->flags & TPM_CHIP_FLAG_IRQ) {
+again:
+ timeout = stop - jiffies;
+ if ((long)timeout <= 0)
+ return -1;
+ rc = wait_event_interruptible_timeout(priv->int_queue,
+ (check_locality
+ (chip, l) >= 0),
+ timeout);
+ if (rc > 0)
+ return l;
+ if (rc == -ERESTARTSYS && freezing(current)) {
+ clear_thread_flag(TIF_SIGPENDING);
+ goto again;
+ }
+ } else {
+ /* wait for burstcount */
+ do {
+ if (check_locality(chip, l) >= 0)
+ return l;
+ msleep(TPM_TIMEOUT);
+ } while (time_before(jiffies, stop));
+ }
+ return -1;
+}
+
+static u8 tpm_tis_status(struct tpm_chip *chip)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ int rc;
+ u8 status;
+
+ rc = tpm_tis_read8(priv, TPM_STS(priv->locality), &status);
+ if (rc < 0)
+ return 0;
+
+ return status;
+}
+
+static void tpm_tis_ready(struct tpm_chip *chip)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+
+ /* this causes the current command to be aborted */
+ tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_COMMAND_READY);
+}
+
+static int get_burstcount(struct tpm_chip *chip)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ unsigned long stop;
+ int burstcnt, rc;
+ u8 value;
+
+ /* wait for burstcount */
+ /* which timeout value, spec has 2 answers (c & d) */
+ stop = jiffies + chip->timeout_d;
+ do {
+ rc = tpm_tis_read8(priv, TPM_STS(priv->locality) + 1, &value);
+ if (rc < 0)
+ return rc;
+
+ burstcnt = value;
+ rc = tpm_tis_read8(priv, TPM_STS(priv->locality) + 2, &value);
+ if (rc < 0)
+ return rc;
+
+ burstcnt += value << 8;
+ if (burstcnt)
+ return burstcnt;
+ msleep(TPM_TIMEOUT);
+ } while (time_before(jiffies, stop));
+ return -EBUSY;
+}
+
+static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ int size = 0, burstcnt, rc;
+
+ while (size < count &&
+ wait_for_tpm_stat(chip,
+ TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+ chip->timeout_c,
+ &priv->read_queue, true) == 0) {
+ burstcnt = min_t(int, get_burstcount(chip), count - size);
+
+ rc = tpm_tis_read_bytes(priv, TPM_DATA_FIFO(priv->locality),
+ burstcnt, buf + size);
+ if (rc < 0)
+ return rc;
+
+ size += burstcnt;
+ }
+ return size;
+}
+
+static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ int size = 0;
+ int expected, status;
+
+ if (count < TPM_HEADER_SIZE) {
+ size = -EIO;
+ goto out;
+ }
+
+ size = recv_data(chip, buf, TPM_HEADER_SIZE);
+ /* read first 10 bytes, including tag, paramsize, and result */
+ if (size < TPM_HEADER_SIZE) {
+ dev_err(&chip->dev, "Unable to read header\n");
+ goto out;
+ }
+
+ expected = be32_to_cpu(*(__be32 *) (buf + 2));
+ if (expected > count) {
+ size = -EIO;
+ goto out;
+ }
+
+ size += recv_data(chip, &buf[TPM_HEADER_SIZE],
+ expected - TPM_HEADER_SIZE);
+ if (size < expected) {
+ dev_err(&chip->dev, "Unable to read remainder of result\n");
+ size = -ETIME;
+ goto out;
+ }
+
+ wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
+ &priv->int_queue, false);
+ status = tpm_tis_status(chip);
+ if (status & TPM_STS_DATA_AVAIL) { /* retry? */
+ dev_err(&chip->dev, "Error left over data\n");
+ size = -EIO;
+ goto out;
+ }
+
+out:
+ tpm_tis_ready(chip);
+ release_locality(chip, priv->locality, 0);
+ return size;
+}
+
+/*
+ * If interrupts are used (signaled by an irq set in the vendor structure)
+ * tpm.c can skip polling for the data to be available as the interrupt is
+ * waited for here
+ */
+static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ int rc, status, burstcnt;
+ size_t count = 0;
+ bool itpm = priv->flags & TPM_TIS_ITPM_POSSIBLE;
+
+ if (request_locality(chip, 0) < 0)
+ return -EBUSY;
+
+ status = tpm_tis_status(chip);
+ if ((status & TPM_STS_COMMAND_READY) == 0) {
+ tpm_tis_ready(chip);
+ if (wait_for_tpm_stat
+ (chip, TPM_STS_COMMAND_READY, chip->timeout_b,
+ &priv->int_queue, false) < 0) {
+ rc = -ETIME;
+ goto out_err;
+ }
+ }
+
+ while (count < len - 1) {
+ burstcnt = min_t(int, get_burstcount(chip), len - count - 1);
+ rc = tpm_tis_write_bytes(priv, TPM_DATA_FIFO(priv->locality),
+ burstcnt, buf + count);
+ if (rc < 0)
+ goto out_err;
+
+ count += burstcnt;
+
+ wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
+ &priv->int_queue, false);
+ status = tpm_tis_status(chip);
+ if (!itpm && (status & TPM_STS_DATA_EXPECT) == 0) {
+ rc = -EIO;
+ goto out_err;
+ }
+ }
+
+ /* write last byte */
+ rc = tpm_tis_write8(priv, TPM_DATA_FIFO(priv->locality), buf[count]);
+ if (rc < 0)
+ goto out_err;
+
+ wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
+ &priv->int_queue, false);
+ status = tpm_tis_status(chip);
+ if (!itpm && (status & TPM_STS_DATA_EXPECT) != 0) {
+ rc = -EIO;
+ goto out_err;
+ }
+
+ return 0;
+
+out_err:
+ tpm_tis_ready(chip);
+ release_locality(chip, priv->locality, 0);
+ return rc;
+}
+
+static void disable_interrupts(struct tpm_chip *chip)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ u32 intmask;
+ int rc;
+
+ rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
+ if (rc < 0)
+ intmask = 0;
+
+ intmask &= ~TPM_GLOBAL_INT_ENABLE;
+ rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
+
+ devm_free_irq(chip->dev.parent, priv->irq, chip);
+ priv->irq = 0;
+ chip->flags &= ~TPM_CHIP_FLAG_IRQ;
+}
+
+/*
+ * If interrupts are used (signaled by an irq set in the vendor structure)
+ * tpm.c can skip polling for the data to be available as the interrupt is
+ * waited for here
+ */
+static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ int rc;
+ u32 ordinal;
+ unsigned long dur;
+
+ rc = tpm_tis_send_data(chip, buf, len);
+ if (rc < 0)
+ return rc;
+
+ /* go and do it */
+ rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
+ if (rc < 0)
+ goto out_err;
+
+ if (chip->flags & TPM_CHIP_FLAG_IRQ) {
+ ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
+
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ dur = tpm2_calc_ordinal_duration(chip, ordinal);
+ else
+ dur = tpm_calc_ordinal_duration(chip, ordinal);
+
+ if (wait_for_tpm_stat
+ (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
+ &priv->read_queue, false) < 0) {
+ rc = -ETIME;
+ goto out_err;
+ }
+ }
+ return len;
+out_err:
+ tpm_tis_ready(chip);
+ release_locality(chip, priv->locality, 0);
+ return rc;
+}
+
+static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
+{
+ int rc, irq;
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+
+ if (!(chip->flags & TPM_CHIP_FLAG_IRQ) || priv->irq_tested)
+ return tpm_tis_send_main(chip, buf, len);
+
+ /* Verify receipt of the expected IRQ */
+ irq = priv->irq;
+ priv->irq = 0;
+ chip->flags &= ~TPM_CHIP_FLAG_IRQ;
+ rc = tpm_tis_send_main(chip, buf, len);
+ priv->irq = irq;
+ chip->flags |= TPM_CHIP_FLAG_IRQ;
+ if (!priv->irq_tested)
+ msleep(1);
+ if (!priv->irq_tested)
+ disable_interrupts(chip);
+ priv->irq_tested = true;
+ return rc;
+}
+
+struct tis_vendor_timeout_override {
+ u32 did_vid;
+ unsigned long timeout_us[4];
+};
+
+static const struct tis_vendor_timeout_override vendor_timeout_overrides[] = {
+ /* Atmel 3204 */
+ { 0x32041114, { (TIS_SHORT_TIMEOUT*1000), (TIS_LONG_TIMEOUT*1000),
+ (TIS_SHORT_TIMEOUT*1000), (TIS_SHORT_TIMEOUT*1000) } },
+};
+
+static bool tpm_tis_update_timeouts(struct tpm_chip *chip,
+ unsigned long *timeout_cap)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ int i, rc;
+ u32 did_vid;
+
+ rc = tpm_tis_read32(priv, TPM_DID_VID(0), &did_vid);
+ if (rc < 0)
+ return rc;
+
+ for (i = 0; i != ARRAY_SIZE(vendor_timeout_overrides); i++) {
+ if (vendor_timeout_overrides[i].did_vid != did_vid)
+ continue;
+ memcpy(timeout_cap, vendor_timeout_overrides[i].timeout_us,
+ sizeof(vendor_timeout_overrides[i].timeout_us));
+ return true;
+ }
+
+ return false;
+}
+
+/*
+ * Early probing for iTPM with STS_DATA_EXPECT flaw.
+ * Try sending command without itpm flag set and if that
+ * fails, repeat with itpm flag set.
+ */
+static int probe_itpm(struct tpm_chip *chip)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ int rc = 0;
+ u8 cmd_getticks[] = {
+ 0x00, 0xc1, 0x00, 0x00, 0x00, 0x0a,
+ 0x00, 0x00, 0x00, 0xf1
+ };
+ size_t len = sizeof(cmd_getticks);
+ bool itpm;
+ u16 vendor;
+
+ rc = tpm_tis_read16(priv, TPM_DID_VID(0), &vendor);
+ if (rc < 0)
+ return rc;
+
+ /* probe only iTPMS */
+ if (vendor != TPM_VID_INTEL)
+ return 0;
+
+ itpm = false;
+
+ rc = tpm_tis_send_data(chip, cmd_getticks, len);
+ if (rc == 0)
+ goto out;
+
+ tpm_tis_ready(chip);
+ release_locality(chip, priv->locality, 0);
+
+ itpm = true;
+
+ rc = tpm_tis_send_data(chip, cmd_getticks, len);
+ if (rc == 0) {
+ dev_info(&chip->dev, "Detected an iTPM.\n");
+ rc = 1;
+ } else
+ rc = -EFAULT;
+
+out:
+ tpm_tis_ready(chip);
+ release_locality(chip, priv->locality, 0);
+
+ return rc;
+}
+
+static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+
+ switch (priv->manufacturer_id) {
+ case TPM_VID_WINBOND:
+ return ((status == TPM_STS_VALID) ||
+ (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY)));
+ case TPM_VID_STM:
+ return (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY));
+ default:
+ return (status == TPM_STS_COMMAND_READY);
+ }
+}
+
+static irqreturn_t tis_int_handler(int dummy, void *dev_id)
+{
+ struct tpm_chip *chip = dev_id;
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ u32 interrupt;
+ int i, rc;
+
+ rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
+ if (rc < 0)
+ return IRQ_NONE;
+
+ if (interrupt == 0)
+ return IRQ_NONE;
+
+ priv->irq_tested = true;
+ if (interrupt & TPM_INTF_DATA_AVAIL_INT)
+ wake_up_interruptible(&priv->read_queue);
+ if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
+ for (i = 0; i < 5; i++)
+ if (check_locality(chip, i) >= 0)
+ break;
+ if (interrupt &
+ (TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT |
+ TPM_INTF_CMD_READY_INT))
+ wake_up_interruptible(&priv->int_queue);
+
+ /* Clear interrupts handled with TPM_EOI */
+ rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
+ if (rc < 0)
+ return IRQ_NONE;
+
+ tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
+ return IRQ_HANDLED;
+}
+
+/* Register the IRQ and issue a command that will cause an interrupt. If an
+ * irq is seen then leave the chip setup for IRQ operation, otherwise reverse
+ * everything and leave in polling mode. Returns 0 on success.
+ */
+static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
+ int flags, int irq)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ u8 original_int_vec;
+ int rc;
+ u32 int_status;
+
+ if (devm_request_irq(chip->dev.parent, irq, tis_int_handler, flags,
+ dev_name(&chip->dev), chip) != 0) {
+ dev_info(&chip->dev, "Unable to request irq: %d for probe\n",
+ irq);
+ return -1;
+ }
+ priv->irq = irq;
+
+ rc = tpm_tis_read8(priv, TPM_INT_VECTOR(priv->locality),
+ &original_int_vec);
+ if (rc < 0)
+ return rc;
+
+ rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), irq);
+ if (rc < 0)
+ return rc;
+
+ rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &int_status);
+ if (rc < 0)
+ return rc;
+
+ /* Clear all existing */
+ rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), int_status);
+ if (rc < 0)
+ return rc;
+
+ /* Turn on */
+ rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality),
+ intmask | TPM_GLOBAL_INT_ENABLE);
+ if (rc < 0)
+ return rc;
+
+ priv->irq_tested = false;
+
+ /* Generate an interrupt by having the core call through to
+ * tpm_tis_send
+ */
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ tpm2_gen_interrupt(chip);
+ else
+ tpm_gen_interrupt(chip);
+
+ /* tpm_tis_send will either confirm the interrupt is working or it
+ * will call disable_irq which undoes all of the above.
+ */
+ if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) {
+ rc = tpm_tis_write8(priv, original_int_vec,
+ TPM_INT_VECTOR(priv->locality));
+ if (rc < 0)
+ return rc;
+
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Try to find the IRQ the TPM is using. This is for legacy x86 systems that
+ * do not have ACPI/etc. We typically expect the interrupt to be declared if
+ * present.
+ */
+static void tpm_tis_probe_irq(struct tpm_chip *chip, u32 intmask)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ u8 original_int_vec;
+ int i, rc;
+
+ rc = tpm_tis_read8(priv, TPM_INT_VECTOR(priv->locality),
+ &original_int_vec);
+ if (rc < 0)
+ return;
+
+ if (!original_int_vec) {
+ if (IS_ENABLED(CONFIG_X86))
+ for (i = 3; i <= 15; i++)
+ if (!tpm_tis_probe_irq_single(chip, intmask, 0,
+ i))
+ return;
+ } else if (!tpm_tis_probe_irq_single(chip, intmask, 0,
+ original_int_vec))
+ return;
+}
+
+void tpm_tis_remove(struct tpm_chip *chip)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ u32 reg = TPM_INT_ENABLE(priv->locality);
+ u32 interrupt;
+ int rc;
+
+ rc = tpm_tis_read32(priv, reg, &interrupt);
+ if (rc < 0)
+ interrupt = 0;
+
+ tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
+ release_locality(chip, priv->locality, 1);
+}
+EXPORT_SYMBOL_GPL(tpm_tis_remove);
+
+static const struct tpm_class_ops tpm_tis = {
+ .status = tpm_tis_status,
+ .recv = tpm_tis_recv,
+ .send = tpm_tis_send,
+ .cancel = tpm_tis_ready,
+ .update_timeouts = tpm_tis_update_timeouts,
+ .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+ .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+ .req_canceled = tpm_tis_req_canceled,
+};
+
+int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
+ const struct tpm_tis_phy_ops *phy_ops,
+ acpi_handle acpi_dev_handle)
+{
+ u32 vendor, intfcaps, intmask;
+ u8 rid;
+ int rc, probe;
+ struct tpm_chip *chip;
+
+ chip = tpmm_chip_alloc(dev, &tpm_tis);
+ if (IS_ERR(chip))
+ return PTR_ERR(chip);
+
+#ifdef CONFIG_ACPI
+ chip->acpi_dev_handle = acpi_dev_handle;
+#endif
+
+ /* Maximum timeouts */
+ chip->timeout_a = TIS_TIMEOUT_A_MAX;
+ chip->timeout_b = TIS_TIMEOUT_B_MAX;
+ chip->timeout_c = TIS_TIMEOUT_C_MAX;
+ chip->timeout_d = TIS_TIMEOUT_D_MAX;
+ priv->phy_ops = phy_ops;
+ dev_set_drvdata(&chip->dev, priv);
+
+ if (wait_startup(chip, 0) != 0) {
+ rc = -ENODEV;
+ goto out_err;
+ }
+
+ /* Take control of the TPM's interrupt hardware and shut it off */
+ rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
+ if (rc < 0)
+ goto out_err;
+
+ intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
+ TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
+ intmask &= ~TPM_GLOBAL_INT_ENABLE;
+ tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
+
+ if (request_locality(chip, 0) != 0) {
+ rc = -ENODEV;
+ goto out_err;
+ }
+
+ rc = tpm2_probe(chip);
+ if (rc)
+ goto out_err;
+
+ rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
+ if (rc < 0)
+ goto out_err;
+
+ priv->manufacturer_id = vendor;
+
+ rc = tpm_tis_read8(priv, TPM_RID(0), &rid);
+ if (rc < 0)
+ goto out_err;
+
+ dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
+ (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
+ vendor >> 16, rid);
+
+ if (!(priv->flags & TPM_TIS_ITPM_POSSIBLE)) {
+ probe = probe_itpm(chip);
+ if (probe < 0) {
+ rc = -ENODEV;
+ goto out_err;
+ }
+
+ if (!!probe)
+ priv->flags |= TPM_TIS_ITPM_POSSIBLE;
+ }
+
+ /* Figure out the capabilities */
+ rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
+ if (rc < 0)
+ goto out_err;
+
+ dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
+ intfcaps);
+ if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
+ dev_dbg(dev, "\tBurst Count Static\n");
+ if (intfcaps & TPM_INTF_CMD_READY_INT)
+ dev_dbg(dev, "\tCommand Ready Int Support\n");
+ if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
+ dev_dbg(dev, "\tInterrupt Edge Falling\n");
+ if (intfcaps & TPM_INTF_INT_EDGE_RISING)
+ dev_dbg(dev, "\tInterrupt Edge Rising\n");
+ if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
+ dev_dbg(dev, "\tInterrupt Level Low\n");
+ if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
+ dev_dbg(dev, "\tInterrupt Level High\n");
+ if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
+ dev_dbg(dev, "\tLocality Change Int Support\n");
+ if (intfcaps & TPM_INTF_STS_VALID_INT)
+ dev_dbg(dev, "\tSts Valid Int Support\n");
+ if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
+ dev_dbg(dev, "\tData Avail Int Support\n");
+
+ /* Very early on issue a command to the TPM in polling mode to make
+ * sure it works. May as well use that command to set the proper
+ * timeouts for the driver.
+ */
+ if (tpm_get_timeouts(chip)) {
+ dev_err(dev, "Could not get TPM timeouts and durations\n");
+ rc = -ENODEV;
+ goto out_err;
+ }
+
+ /* INTERRUPT Setup */
+ init_waitqueue_head(&priv->read_queue);
+ init_waitqueue_head(&priv->int_queue);
+ if (irq != -1) {
+ if (irq) {
+ tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
+ irq);
+ if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
+ dev_err(&chip->dev, FW_BUG
+ "TPM interrupt not working, polling instead\n");
+ } else {
+ tpm_tis_probe_irq(chip, intmask);
+ }
+ }
+
+ if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+ rc = tpm2_do_selftest(chip);
+ if (rc == TPM2_RC_INITIALIZE) {
+ dev_warn(dev, "Firmware has not started TPM\n");
+ rc = tpm2_startup(chip, TPM2_SU_CLEAR);
+ if (!rc)
+ rc = tpm2_do_selftest(chip);
+ }
+
+ if (rc) {
+ dev_err(dev, "TPM self test failed\n");
+ if (rc > 0)
+ rc = -ENODEV;
+ goto out_err;
+ }
+ } else {
+ if (tpm_do_selftest(chip)) {
+ dev_err(dev, "TPM self test failed\n");
+ rc = -ENODEV;
+ goto out_err;
+ }
+ }
+
+ return tpm_chip_register(chip);
+out_err:
+ tpm_tis_remove(chip);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(tpm_tis_core_init);
+
+#ifdef CONFIG_PM_SLEEP
+static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+ u32 intmask;
+ int rc;
+
+ /* reenable interrupts that device may have lost or
+ * BIOS/firmware may have disabled
+ */
+ rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), priv->irq);
+ if (rc < 0)
+ return;
+
+ rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
+ if (rc < 0)
+ return;
+
+ intmask |= TPM_INTF_CMD_READY_INT
+ | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
+ | TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
+
+ tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
+}
+
+int tpm_tis_resume(struct device *dev)
+{
+ struct tpm_chip *chip = dev_get_drvdata(dev);
+ int ret;
+
+ if (chip->flags & TPM_CHIP_FLAG_IRQ)
+ tpm_tis_reenable_interrupts(chip);
+
+ ret = tpm_pm_resume(dev);
+ if (ret)
+ return ret;
+
+ /* TPM 1.2 requires self-test on resume. This function actually returns
+ * an error code but for unknown reason it isn't handled.
+ */
+ if (!(chip->flags & TPM_CHIP_FLAG_TPM2))
+ tpm_do_selftest(chip);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(tpm_tis_resume);
+#endif
+
+MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
+MODULE_DESCRIPTION("TPM Driver");
+MODULE_VERSION("2.0");
+MODULE_LICENSE("GPL");
#include "tpm.h"
+enum tis_access {
+ TPM_ACCESS_VALID = 0x80,
+ TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
+ TPM_ACCESS_REQUEST_PENDING = 0x04,
+ TPM_ACCESS_REQUEST_USE = 0x02,
+};
+
+enum tis_status {
+ TPM_STS_VALID = 0x80,
+ TPM_STS_COMMAND_READY = 0x40,
+ TPM_STS_GO = 0x20,
+ TPM_STS_DATA_AVAIL = 0x10,
+ TPM_STS_DATA_EXPECT = 0x08,
+};
+
+enum tis_int_flags {
+ TPM_GLOBAL_INT_ENABLE = 0x80000000,
+ TPM_INTF_BURST_COUNT_STATIC = 0x100,
+ TPM_INTF_CMD_READY_INT = 0x080,
+ TPM_INTF_INT_EDGE_FALLING = 0x040,
+ TPM_INTF_INT_EDGE_RISING = 0x020,
+ TPM_INTF_INT_LEVEL_LOW = 0x010,
+ TPM_INTF_INT_LEVEL_HIGH = 0x008,
+ TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
+ TPM_INTF_STS_VALID_INT = 0x002,
+ TPM_INTF_DATA_AVAIL_INT = 0x001,
+};
+
+enum tis_defaults {
+ TIS_MEM_LEN = 0x5000,
+ TIS_SHORT_TIMEOUT = 750, /* ms */
+ TIS_LONG_TIMEOUT = 2000, /* 2 sec */
+};
+
+/* Some timeout values are needed before it is known whether the chip is
+ * TPM 1.0 or TPM 2.0.
+ */
+#define TIS_TIMEOUT_A_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_A)
+#define TIS_TIMEOUT_B_MAX max(TIS_LONG_TIMEOUT, TPM2_TIMEOUT_B)
+#define TIS_TIMEOUT_C_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_C)
+#define TIS_TIMEOUT_D_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_D)
+
+#define TPM_ACCESS(l) (0x0000 | ((l) << 12))
+#define TPM_INT_ENABLE(l) (0x0008 | ((l) << 12))
+#define TPM_INT_VECTOR(l) (0x000C | ((l) << 12))
+#define TPM_INT_STATUS(l) (0x0010 | ((l) << 12))
+#define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
+#define TPM_STS(l) (0x0018 | ((l) << 12))
+#define TPM_STS3(l) (0x001b | ((l) << 12))
+#define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
+
+#define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
+#define TPM_RID(l) (0x0F04 | ((l) << 12))
+
+enum tpm_tis_flags {
+ TPM_TIS_ITPM_POSSIBLE = BIT(0),
+};
+
struct tpm_tis_data {
u16 manufacturer_id;
int locality;
int irq;
bool irq_tested;
+ unsigned int flags;
wait_queue_head_t int_queue;
wait_queue_head_t read_queue;
const struct tpm_tis_phy_ops *phy_ops;
return data->phy_ops->write32(data, addr, value);
}
+void tpm_tis_remove(struct tpm_chip *chip);
+int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
+ const struct tpm_tis_phy_ops *phy_ops,
+ acpi_handle acpi_dev_handle);
+
+#ifdef CONFIG_PM_SLEEP
+int tpm_tis_resume(struct device *dev);
+#endif
+
#endif
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff