PNP SMCf010 quirk: work around Toshiba Portege 4000 ACPI issues
authorBjorn Helgaas <bjorn.helgaas@hp.com>
Fri, 6 Jul 2007 09:39:54 +0000 (02:39 -0700)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Fri, 6 Jul 2007 17:23:43 +0000 (10:23 -0700)
When we enable the SMCf010 IR device, the Toshiba Portege 4000 BIOS claims
the device is working, but it really isn't configured correctly.  The BIOS
*will* configure it, but only if we call _SRS after (1) reversing the order
of the SIR and FIR I/O port regions and (2) changing the IRQ from
active-high to active-low.

This patch addresses the 2.6.22 regression:
    "no irda0 interface (2.6.21 was OK), smsc does not find chip"

I tested this on a Portege 4000.  The smsc-ircc2 driver correctly detects
the device, and "irattach irda0 -s && irdadump" shows transmitted and
received packets.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/pnp/quirks.c

index 967a8e22b2da9d765b20724da4c5808bf8f691ab..7c3236690cc3f04fbaec01b3324dc2910d41b1d8 100644 (file)
@@ -136,11 +136,10 @@ static int quirk_smc_fir_enabled(struct pnp_dev *dev)
 
 static void quirk_smc_enable(struct pnp_dev *dev)
 {
-       /*
-        * If the BIOS left the device disabled, or it is enabled and
-        * responding correctly, we're in good shape.
-        */
-       if (!dev->active || quirk_smc_fir_enabled(dev))
+       struct resource fir, sir, irq;
+
+       pnp_activate_dev(dev);
+       if (quirk_smc_fir_enabled(dev))
                return;
 
        /*
@@ -152,16 +151,62 @@ static void quirk_smc_enable(struct pnp_dev *dev)
         * this.  Fortunately, they do fix things up if we auto-configure
         * the device using its _PRS and _SRS methods.
         */
-       dev_err(&dev->dev, "%s device not responding, auto-configuring "
-               "resources\n", dev->id->id);
+       dev_err(&dev->dev, "%s not responding at SIR 0x%lx, FIR 0x%lx; "
+               "auto-configuring\n", dev->id->id,
+               (unsigned long) pnp_port_start(dev, 0),
+               (unsigned long) pnp_port_start(dev, 1));
 
        pnp_disable_dev(dev);
        pnp_init_resource_table(&dev->res);
        pnp_auto_config_dev(dev);
        pnp_activate_dev(dev);
+       if (quirk_smc_fir_enabled(dev)) {
+               dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n",
+                       (unsigned long) pnp_port_start(dev, 0),
+                       (unsigned long) pnp_port_start(dev, 1));
+               return;
+       }
+
+       /*
+        * The Toshiba Portege 4000 _CRS reports the FIR region first,
+        * followed by the SIR region.  The BIOS will configure the bridge,
+        * but only if we call _SRS with SIR first, then FIR.  It also
+        * reports the IRQ as active high, when it is really active low.
+        */
+       dev_err(&dev->dev, "not responding at SIR 0x%lx, FIR 0x%lx; "
+               "swapping SIR/FIR and reconfiguring\n",
+               (unsigned long) pnp_port_start(dev, 0),
+               (unsigned long) pnp_port_start(dev, 1));
+
+       /*
+        * Clear IORESOURCE_AUTO so pnp_activate_dev() doesn't reassign
+        * these resources any more.
+        */
+       fir = dev->res.port_resource[0];
+       sir = dev->res.port_resource[1];
+       fir.flags &= ~IORESOURCE_AUTO;
+       sir.flags &= ~IORESOURCE_AUTO;
+
+       irq = dev->res.irq_resource[0];
+       irq.flags &= ~IORESOURCE_AUTO;
+       irq.flags &= ~IORESOURCE_BITS;
+       irq.flags |= IORESOURCE_IRQ_LOWEDGE;
+
+       pnp_disable_dev(dev);
+       dev->res.port_resource[0] = sir;
+       dev->res.port_resource[1] = fir;
+       dev->res.irq_resource[0] = irq;
+       pnp_activate_dev(dev);
+
+       if (quirk_smc_fir_enabled(dev)) {
+               dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n",
+                       (unsigned long) pnp_port_start(dev, 0),
+                       (unsigned long) pnp_port_start(dev, 1));
+               return;
+       }
 
-       if (!quirk_smc_fir_enabled(dev))
-               dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\"\n");
+       dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\" and "
+               "email bjorn.helgaas@hp.com\n");
 }