pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)

... the same as the 'pata_hpt366' driver does.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index a1f830eaa7c91528f19ae00630149c855165904e..6003a34d614ea4803b89833fe644c32306e128ca 100644 (file)
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt37x"
-#define DRV_VERSION    "0.6.19"
+#define DRV_VERSION    "0.6.20"
 
 struct hpt_clock {
        u8      xfer_speed;
@@ -863,7 +863,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                        chip_table = &hpt372;
                        break;
                default:
-                       printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, "
+                       pr_err(DRV_NAME ": Unknown HPT366 subtype, "
                               "please report (%d).\n", rev);
                        return -ENODEV;
                }
@@ -906,8 +906,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                                *ppi = &info_hpt374_fn1;
                        break;
                default:
-                       printk(KERN_ERR
-                              "pata_hpt37x: PCI table is bogus, please report (%d).\n",
+                       pr_err(DRV_NAME
+                              ": PCI table is bogus, please report (%d).\n",
                               dev->device);
                                return -ENODEV;
                }
@@ -957,8 +957,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                u8 sr;
                u32 total = 0;
 
-               printk(KERN_WARNING
-                      "pata_hpt37x: BIOS has not set timing clocks.\n");
+               pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n");
 
                /* This is the process the HPT371 BIOS is reported to use */
                for (i = 0; i < 128; i++) {
@@ -1014,7 +1013,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                                               (f_high << 16) | f_low | 0x100);
                }
                if (adjust == 8) {
-                       printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n");
+                       pr_err(DRV_NAME ": DPLL did not stabilize!\n");
                        return -ENODEV;
                }
                if (dpll == 3)
@@ -1022,8 +1021,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                else
                        private_data = (void *)hpt37x_timings_50;
 
-               printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n",
-                      MHz[clock_slot], MHz[dpll]);
+               pr_info(DRV_NAME ": bus clock %dMHz, using %dMHz DPLL.\n",
+                       MHz[clock_slot], MHz[dpll]);
        } else {
                private_data = (void *)chip_table->clocks[clock_slot];
                /*
@@ -1036,8 +1035,9 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                        ppi[0] = &info_hpt370_33;
                if (clock_slot < 2 && ppi[0] == &info_hpt370a)
                        ppi[0] = &info_hpt370a_33;
-               printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
-                      chip_table->name, MHz[clock_slot]);
+
+               pr_info(DRV_NAME ": %s using %dMHz bus clock.\n",
+                       chip_table->name, MHz[clock_slot]);
        }
 
        /* Now kick off ATA set up */

diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index d2239bbdb798faba32b70f2a122ee1222052d8e8..eca68caf5f46cedece0b5127ac615f33de325808 100644 (file)
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt3x2n"
-#define DRV_VERSION    "0.3.13"
+#define DRV_VERSION    "0.3.14"
 
 enum {
        HPT_PCI_FAST    =       (1 << 31),
@@ -418,7 +418,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
                u16 sr;
                u32 total = 0;
 
-               printk(KERN_WARNING "pata_hpt3x2n: BIOS clock data not set.\n");
+               pr_warning(DRV_NAME ": BIOS clock data not set.\n");
 
                /* This is the process the HPT371 BIOS is reported to use */
                for (i = 0; i < 128; i++) {
@@ -528,8 +528,7 @@ hpt372n:
                ppi[0] = &info_hpt372n;
                break;
        default:
-               printk(KERN_ERR
-                      "pata_hpt3x2n: PCI table is bogus please report (%d).\n",
+               pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
                       dev->device);
                return -ENODEV;
        }
@@ -579,12 +578,11 @@ hpt372n:
                pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
        }
        if (adjust == 8) {
-               printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n");
+               pr_err(DRV_NAME ": DPLL did not stabilize!\n");
                return -ENODEV;
        }
 
-       printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
-              pci_mhz);
+       pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz);
 
        /*
         * Set our private data up. We only need a few flags