libata: Fix several inaccuracies in developer's guide

Commit 6bfff31e77cfa1b13490337e5a4dbaa3407e83ac (libata: kill probe_ent
and related helpers) killed ata_device_add() but didn't remove references
to it from the libata developer's guide.

Commits 9363c3825ea9ad76561eb48a395349dd29211ed6 (libata: rename SFF
functions) and 5682ed33aae05d10a25c95633ef9d9c062825888 (libata: rename
SFF port ops) renamed the taskfile access methods but didn't update the
developer's guide.  Commit c9f75b04ed5ed65a058d18a8a8dda50632a96de8
(libata: kill ata_noop_dev_select()) didn't update the developer's
guide as well.

The guide also refers to the long gone ata_pio_data_xfer_noirq(),
ata_pio_data_xfer(), and ata_mmio_data_xfer() -- replace those by
the modern ata_sff_data_xfer_noirq(), ata_sff_data_xfer(), and
ata_sff_data_xfer32().

Also, remove the reference to non-existant ata_port_stop()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index ba997577150369c5d7bc655c82704e01567e685d..ff3e5bec1c24509d76f1e1bc8e8d5379c4a54a60 100644 (file)
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
        issue of SET FEATURES - XFER MODE, and prior to operation.
        </para>
        <para>
-       Called by ata_device_add() after ata_dev_identify() determines
-       a device is present.
-       </para>
-       <para>
        This entry may be specified as NULL in ata_port_operations.
        </para>
 
@@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in
 
        <sect2><title>Taskfile read/write</title>
        <programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
        </programlisting>
 
        <para>
@@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
        hardware registers / DMA buffers, to obtain the current set of
        taskfile register values.
        Most drivers for taskfile-based hardware (PIO or MMIO) use
-       ata_tf_load() and ata_tf_read() for these hooks.
+       ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
        </para>
 
        </sect2>
 
        <sect2><title>PIO data read/write</title>
        <programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
        </programlisting>
 
        <para>
 All bmdma-style drivers must implement this hook.  This is the low-level
 operation that actually copies the data bytes during a PIO data
 transfer.
-Typically the driver
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
-ata_mmio_data_xfer().
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
        </para>
 
        </sect2>
 
        <sect2><title>ATA command execute</title>
        <programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
        </programlisting>
 
        <para>
        causes an ATA command, previously loaded with
        ->tf_load(), to be initiated in hardware.
-       Most drivers for taskfile-based hardware use ata_exec_command()
+       Most drivers for taskfile-based hardware use ata_sff_exec_command()
        for this hook.
        </para>
 
@@ -218,8 +213,8 @@ command.
 
        <sect2><title>Read specific ATA shadow registers</title>
        <programlisting>
-u8   (*check_status)(struct ata_port *ap);
-u8   (*check_altstatus)(struct ata_port *ap);
+u8   (*sff_check_status)(struct ata_port *ap);
+u8   (*sff_check_altstatus)(struct ata_port *ap);
        </programlisting>
 
        <para>
@@ -227,20 +222,14 @@ u8   (*check_altstatus)(struct ata_port *ap);
        hardware.  On some hardware, reading the Status register has
        the side effect of clearing the interrupt condition.
        Most drivers for taskfile-based hardware use
-       ata_check_status() for this hook.
-       </para>
-       <para>
-       Note that because this is called from ata_device_add(), at
-       least a dummy function that clears device interrupts must be
-       provided for all drivers, even if the controller doesn't
-       actually have a taskfile status register.
+       ata_sff_check_status() for this hook.
        </para>
 
        </sect2>
 
        <sect2><title>Select ATA device on bus</title>
        <programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
        </programlisting>
 
        <para>
@@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
        </para>
        <para>
        Most drivers for taskfile-based hardware use
-       ata_std_dev_select() for this hook.  Controllers which do not
-       support second drives on a port (such as SATA contollers) will
-       use ata_noop_dev_select().
+       ata_sff_dev_select() for this hook.
        </para>
 
        </sect2>
@@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *);
        to struct ata_host_set.
        </para>
        <para>
-       Most legacy IDE drivers use ata_interrupt() for the
+       Most legacy IDE drivers use ata_sff_interrupt() for the
        irq_handler hook, which scans all ports in the host_set,
        determines which queued command was active (if any), and calls
-       ata_host_intr(ap,qc).
+       ata_sff_host_intr(ap,qc).
        </para>
        <para>
-       Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+       Most legacy IDE drivers use ata_sff_irq_clear() for the
        irq_clear() hook, which simply clears the interrupt and error
        flags in the DMA status register.
        </para>
@@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set);
        data from port at this time.
        </para>
        <para>
-       Many drivers use ata_port_stop() as this hook, which frees the
-       PRD table.
-       </para>
-       <para>
        ->host_stop() is called after all ->port_stop() calls
 have completed.  The hook must finalize hardware shutdown, release DMA
 and other resources, etc.