rtl8xxxu: Move PHY RF init into device specific functions

Load the RF table in init_phy_rf(), which allows for applying device
specific RF hacks in the same place. Getting rid of more ugly if ()
clutter.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index b88cf163148928d78c3b1ff7d4c2ca26d629bc5e..50ca3eb875bd648fe93799b692ad74096aab2f35 100644 (file)
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -4015,6 +4015,80 @@ static int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv,
        return 0;
 }
 
+static int rtl8723au_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+       int ret;
+
+       ret = rtl8xxxu_init_phy_rf(priv, rtl8723au_radioa_1t_init_table, RF_A);
+
+       /* Reduce 80M spur */
+       rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d);
+       rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
+       rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82);
+       rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
+
+       return ret;
+}
+
+static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+       int ret;
+
+       ret = rtl8xxxu_init_phy_rf(priv, rtl8723bu_radioa_1t_init_table, RF_A);
+       /*
+        * PHY LCK
+        */
+       rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0);
+       rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01);
+       msleep(200);
+       rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0);
+
+       return ret;
+}
+
+#ifdef CONFIG_RTL8XXXU_UNTESTED
+static int rtl8192cu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+       struct rtl8xxxu_rfregval *rftable;
+       int ret;
+
+       if (priv->rtl_chip == RTL8188C) {
+               if (priv->hi_pa)
+                       rftable = rtl8188ru_radioa_1t_highpa_table;
+               else
+                       rftable = rtl8192cu_radioa_1t_init_table;
+               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+       } else if (priv->rf_paths == 1) {
+               rftable = rtl8192cu_radioa_1t_init_table;
+               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+       } else {
+               rftable = rtl8192cu_radioa_2t_init_table;
+               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+               if (ret)
+                       goto exit;
+               rftable = rtl8192cu_radiob_2t_init_table;
+               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B);
+       }
+
+exit:
+       return ret;
+}
+#endif
+
+static int rtl8192eu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+       int ret;
+
+       ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radioa_init_table, RF_A);
+       if (ret)
+               goto exit;
+
+       ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radiob_init_table, RF_B);
+
+exit:
+       return ret;
+}
+
 static int rtl8xxxu_llt_write(struct rtl8xxxu_priv *priv, u8 address, u8 data)
 {
        int ret = -EBUSY;
@@ -7552,7 +7626,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 {
        struct rtl8xxxu_priv *priv = hw->priv;
        struct device *dev = &priv->udev->dev;
-       struct rtl8xxxu_rfregval *rftable;
        bool macpower;
        int ret;
        u8 val8;
@@ -7617,59 +7690,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
        if (ret)
                goto exit;
 
-       switch(priv->rtl_chip) {
-       case RTL8723A:
-               rftable = rtl8723au_radioa_1t_init_table;
-               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
-
-               /* Reduce 80M spur */
-               rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d);
-               rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
-               rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82);
-               rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
-               break;
-       case RTL8723B:
-               rftable = rtl8723bu_radioa_1t_init_table;
-               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
-               /*
-                * PHY LCK
-                */
-               rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0);
-               rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01);
-               msleep(200);
-               rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0);
-               break;
-       case RTL8188C:
-               if (priv->hi_pa)
-                       rftable = rtl8188ru_radioa_1t_highpa_table;
-               else
-                       rftable = rtl8192cu_radioa_1t_init_table;
-               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
-               break;
-       case RTL8191C:
-               rftable = rtl8192cu_radioa_1t_init_table;
-               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
-               break;
-       case RTL8192C:
-               rftable = rtl8192cu_radioa_2t_init_table;
-               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
-               if (ret)
-                       break;
-               rftable = rtl8192cu_radiob_2t_init_table;
-               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B);
-               break;
-       case RTL8192E:
-               rftable = rtl8192eu_radioa_init_table;
-               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
-               if (ret)
-                       break;
-               rftable = rtl8192eu_radiob_init_table;
-               ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B);
-               break;
-       default:
-               ret = -EINVAL;
-       }
-
+       ret = priv->fops->init_phy_rf(priv);
        if (ret)
                goto exit;
 
@@ -9715,6 +9736,7 @@ static struct rtl8xxxu_fileops rtl8723au_fops = {
        .reset_8051 = rtl8xxxu_reset_8051,
        .llt_init = rtl8xxxu_init_llt_table,
        .init_phy_bb = rtl8723au_init_phy_bb,
+       .init_phy_rf = rtl8723au_init_phy_rf,
        .phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
        .config_channel = rtl8723au_config_channel,
        .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
@@ -9747,6 +9769,7 @@ static struct rtl8xxxu_fileops rtl8723bu_fops = {
        .reset_8051 = rtl8723bu_reset_8051,
        .llt_init = rtl8xxxu_auto_llt_table,
        .init_phy_bb = rtl8723bu_init_phy_bb,
+       .init_phy_rf = rtl8723bu_init_phy_rf,
        .phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
        .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
        .config_channel = rtl8723bu_config_channel,
@@ -9785,6 +9808,7 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = {
        .reset_8051 = rtl8xxxu_reset_8051,
        .llt_init = rtl8xxxu_init_llt_table,
        .init_phy_bb = rtl8723au_init_phy_bb,
+       .init_phy_rf = rtl8192cu_init_phy_rf,
        .phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
        .config_channel = rtl8723au_config_channel,
        .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
@@ -9819,6 +9843,7 @@ static struct rtl8xxxu_fileops rtl8192eu_fops = {
        .reset_8051 = rtl8xxxu_reset_8051,
        .llt_init = rtl8xxxu_auto_llt_table,
        .init_phy_bb = rtl8192eu_init_phy_bb,
+       .init_phy_rf = rtl8192eu_init_phy_rf,
        .phy_iq_calibrate = rtl8192eu_phy_iq_calibrate,
        .config_channel = rtl8723bu_config_channel,
        .parse_rx_desc = rtl8xxxu_parse_rxdesc24,

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index da86f3f528b4909581e97e7965962b4989e327f6..3efbb6042ca2cd590fa660a104c7d2a6117ad251 100644 (file)
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1284,6 +1284,7 @@ struct rtl8xxxu_fileops {
        void (*reset_8051) (struct rtl8xxxu_priv *priv);
        int (*llt_init) (struct rtl8xxxu_priv *priv, u8 last_tx_page);
        void (*init_phy_bb) (struct rtl8xxxu_priv *priv);
+       int (*init_phy_rf) (struct rtl8xxxu_priv *priv);
        void (*phy_init_antenna_selection) (struct rtl8xxxu_priv *priv);
        void (*phy_iq_calibrate) (struct rtl8xxxu_priv *priv);
        void (*config_channel) (struct ieee80211_hw *hw);