drm/i915: vlv: make CRI clock enabling explicit during resume
authorImre Deak <imre.deak@intel.com>
Thu, 9 Jan 2014 15:08:15 +0000 (17:08 +0200)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Fri, 10 Jan 2014 16:59:40 +0000 (17:59 +0100)
intel_init_dpio() isn't called during resume, so we won't set the CRI
clock enable bit during that time. Move the enabling to
intel_reset_dpio() instead.

Note that the HW reset value for this bit is 1, so probably this patch
won't make any difference. We should still make the setting explicit,
since BIOS could change things under us.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_display.c

index 554e83d043feba61597f4dcec34fc61fecbd98e6..7df05112951de36c5bc23af7371314c14421182b 100644 (file)
@@ -1364,10 +1364,6 @@ static void intel_init_dpio(struct drm_device *dev)
        if (!IS_VALLEYVIEW(dev))
                return;
 
-       /* Enable the CRI clock source so we can get at the display */
-       I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
-                  DPLL_INTEGRATED_CRI_CLK_VLV);
-
        DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
 }
 
@@ -1378,6 +1374,10 @@ static void intel_reset_dpio(struct drm_device *dev)
        if (!IS_VALLEYVIEW(dev))
                return;
 
+       /* Enable the CRI clock source so we can get at the display */
+       I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+                  DPLL_INTEGRATED_CRI_CLK_VLV);
+
        /*
         * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
         *  6.  De-assert cmn_reset/side_reset. Same as VLV X0.