b43: Add fw capabilities

Add automagic feature flags, so the firmware can tell the driver
about supported features and the driver can switch features on/off as
needed.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 75aede02f932f3c45e3eebc4413015a002141ace..f580c2812d91846d611c552295e9722fe09aa06f 100644 (file)
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -163,6 +163,7 @@ enum {
 #define B43_SHM_SH_WLCOREREV           0x0016  /* 802.11 core revision */
 #define B43_SHM_SH_PCTLWDPOS           0x0008
 #define B43_SHM_SH_RXPADOFF            0x0034  /* RX Padding data offset (PIO only) */
+#define B43_SHM_SH_FWCAPA              0x0042  /* Firmware capabilities (Opensource firmware only) */
 #define B43_SHM_SH_PHYVER              0x0050  /* PHY version */
 #define B43_SHM_SH_PHYTYPE             0x0052  /* PHY type */
 #define B43_SHM_SH_ANTSWAP             0x005C  /* Antenna swap threshold */
@@ -297,6 +298,10 @@ enum {
 #define B43_HF_MLADVW          0x001000000000ULL /* N PHY ML ADV workaround (rev >= 13 only) */
 #define B43_HF_PR45960W                0x080000000000ULL /* PR 45960 workaround (rev >= 13 only) */
 
+/* Firmware capabilities field in SHM (Opensource firmware only) */
+#define B43_FWCAPA_HWCRYPTO    0x0001
+#define B43_FWCAPA_QOS         0x0002
+
 /* MacFilter offsets. */
 #define B43_MACFILTER_SELF             0x0000
 #define B43_MACFILTER_BSSID            0x0003
@@ -596,6 +601,13 @@ struct b43_wl {
        /* Pointer to the ieee80211 hardware data structure */
        struct ieee80211_hw *hw;
 
+       /* The number of queues that were registered with the mac80211 subsystem
+        * initially. This is a backup copy of hw->queues in case hw->queues has
+        * to be dynamically lowered at runtime (Firmware does not support QoS).
+        * hw->queues has to be restored to the original value before unregistering
+        * from the mac80211 subsystem. */
+       u16 mac80211_initially_registered_queues;
+
        struct mutex mutex;
        spinlock_t irq_lock;
        /* R/W lock for data transmission.
@@ -749,6 +761,8 @@ struct b43_wldev {
        bool dfq_valid;         /* Directed frame queue valid (IBSS PS mode, ATIM) */
        bool radio_hw_enable;   /* saved state of radio hardware enabled state */
        bool suspend_in_progress;       /* TRUE, if we are in a suspend/resume cycle */
+       bool qos_enabled;               /* TRUE, if QoS is used. */
+       bool hwcrypto_enabled;          /* TRUE, if HW crypto acceleration is enabled. */
 
        /* PHY/Radio device. */
        struct b43_phy phy;

diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index eae680b530527f639fcce2f1568188540e69e3cd..7964cc32b258bb80599e54be2e1c6c478f356119 100644 (file)
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1285,7 +1285,7 @@ static struct b43_dmaring *select_ring_by_priority(struct b43_wldev *dev,
 {
        struct b43_dmaring *ring;
 
-       if (b43_modparam_qos) {
+       if (dev->qos_enabled) {
                /* 0 = highest priority */
                switch (queue_prio) {
                default:

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 5d9f1981f2ce8a9edda779d087a2f14c11c35843..6456afebdba10d3268d6184a76695f253bce135b 100644 (file)
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -80,8 +80,8 @@ static int modparam_nohwcrypt;
 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
-int b43_modparam_qos = 1;
-module_param_named(qos, b43_modparam_qos, int, 0444);
+static int modparam_qos = 1;
+module_param_named(qos, modparam_qos, int, 0444);
 MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
 
 static int modparam_btcoex = 1;
@@ -538,6 +538,13 @@ void b43_hf_write(struct b43_wldev *dev, u64 value)
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
 }
 
+/* Read the firmware capabilities bitmask (Opensource firmware only) */
+static u16 b43_fwcapa_read(struct b43_wldev *dev)
+{
+       B43_WARN_ON(!dev->fw.opensource);
+       return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA);
+}
+
 void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
 {
        u32 low, high;
@@ -2307,12 +2314,34 @@ static int b43_upload_microcode(struct b43_wldev *dev)
        dev->fw.patch = fwpatch;
        dev->fw.opensource = (fwdate == 0xFFFF);
 
+       /* Default to use-all-queues. */
+       dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues;
+       dev->qos_enabled = !!modparam_qos;
+       /* Default to firmware/hardware crypto acceleration. */
+       dev->hwcrypto_enabled = 1;
+
        if (dev->fw.opensource) {
+               u16 fwcapa;
+
                /* Patchlevel info is encoded in the "time" field. */
                dev->fw.patch = fwtime;
-               b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n",
-                       dev->fw.rev, dev->fw.patch,
-                       dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : "");
+               b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n",
+                       dev->fw.rev, dev->fw.patch);
+
+               fwcapa = b43_fwcapa_read(dev);
+               if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) {
+                       b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n");
+                       /* Disable hardware crypto and fall back to software crypto. */
+                       dev->hwcrypto_enabled = 0;
+               }
+               if (!(fwcapa & B43_FWCAPA_QOS)) {
+                       b43info(dev->wl, "QoS not supported by firmware\n");
+                       /* Disable QoS. Tweak hw->queues to 1. It will be restored before
+                        * ieee80211_unregister to make sure the networking core can
+                        * properly free possible resources. */
+                       dev->wl->hw->queues = 1;
+                       dev->qos_enabled = 0;
+               }
        } else {
                b43info(dev->wl, "Loading firmware version %u.%u "
                        "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
@@ -3627,7 +3656,7 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
        if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
                goto out_unlock;
 
-       if (dev->fw.pcm_request_failed) {
+       if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) {
                /* We don't have firmware for the crypto engine.
                 * Must use software-crypto. */
                err = -EOPNOTSUPP;
@@ -4727,6 +4756,7 @@ static int b43_wireless_init(struct ssb_device *dev)
                b43err(NULL, "Could not allocate ieee80211 device\n");
                goto out;
        }
+       wl = hw_to_b43_wl(hw);
 
        /* fill hw info */
        hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
@@ -4740,7 +4770,8 @@ static int b43_wireless_init(struct ssb_device *dev)
                BIT(NL80211_IFTYPE_WDS) |
                BIT(NL80211_IFTYPE_ADHOC);
 
-       hw->queues = b43_modparam_qos ? 4 : 1;
+       hw->queues = modparam_qos ? 4 : 1;
+       wl->mac80211_initially_registered_queues = hw->queues;
        hw->max_rates = 2;
        SET_IEEE80211_DEV(hw, dev->dev);
        if (is_valid_ether_addr(sprom->et1mac))
@@ -4748,9 +4779,7 @@ static int b43_wireless_init(struct ssb_device *dev)
        else
                SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
 
-       /* Get and initialize struct b43_wl */
-       wl = hw_to_b43_wl(hw);
-       memset(wl, 0, sizeof(*wl));
+       /* Initialize struct b43_wl */
        wl->hw = hw;
        spin_lock_init(&wl->irq_lock);
        rwlock_init(&wl->tx_lock);
@@ -4816,8 +4845,13 @@ static void b43_remove(struct ssb_device *dev)
        cancel_work_sync(&wldev->restart_work);
 
        B43_WARN_ON(!wl);
-       if (wl->current_dev == wldev)
+       if (wl->current_dev == wldev) {
+               /* Restore the queues count before unregistering, because firmware detect
+                * might have modified it. Restoring is important, so the networking
+                * stack can properly free resources. */
+               wl->hw->queues = wl->mac80211_initially_registered_queues;
                ieee80211_unregister_hw(wl->hw);
+       }
 
        b43_one_core_detach(dev);
 

diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index 40abcf5d1b4307d27fb0c6d8d48cb29fda85ee15..950fb1b0546d402ecd0674bf8815ee8340ed4a95 100644 (file)
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -39,7 +39,6 @@
 #define PAD_BYTES(nr_bytes)            P4D_BYTES( __LINE__ , (nr_bytes))
 
 
-extern int b43_modparam_qos;
 extern int b43_modparam_verbose;
 
 /* Logmessage verbosity levels. Update the b43_modparam_verbose helptext, if

diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 8cd9776752e691407763318599cf1e38660c5f3c..69138e8c1db6778e0c8a2d9bd665b1a609f236e0 100644 (file)
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -313,7 +313,7 @@ static struct b43_pio_txqueue *select_queue_by_priority(struct b43_wldev *dev,
 {
        struct b43_pio_txqueue *q;
 
-       if (b43_modparam_qos) {
+       if (dev->qos_enabled) {
                /* 0 = highest priority */
                switch (queue_prio) {
                default: