ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access

This is so we can share routines which access this register
on calib.c

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.h b/drivers/net/wireless/ath/ath9k/ar9002_phy.h
index 4fe204ed3a7cee248f93156c138d4d4efbd29319..afe48086250dfc255addf065003150e4db936636 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.h
@@ -120,13 +120,6 @@
 #define AR_PHY_AGC_CTL1_COARSE_HIGH      0x003F8000
 #define AR_PHY_AGC_CTL1_COARSE_HIGH_S    15
 
-#define AR_PHY_AGC_CONTROL               0x9860
-#define AR_PHY_AGC_CONTROL_CAL           0x00000001
-#define AR_PHY_AGC_CONTROL_NF            0x00000002
-#define AR_PHY_AGC_CONTROL_ENABLE_NF     0x00008000
-#define AR_PHY_AGC_CONTROL_FLTR_CAL      0x00010000
-#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF  0x00020000
-
 #define AR_PHY_CCA                  0x9864
 #define AR_PHY_MINCCA_PWR           0x0FF80000
 #define AR_PHY_MINCCA_PWR_S         19

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 70e647b13e0aa5a98dc7d0d1082ea4149421daae..4e1177dc24acbebb18e9b30391c9ad342d8a9319 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -359,7 +359,6 @@
 #define AR_PHY_SWITCH_COM_2      (AR_SM_BASE + 0x8c)
 #define AR_PHY_RX_CHAINMASK      (AR_SM_BASE + 0xa0)
 #define AR_PHY_CAL_CHAINMASK     (AR_SM_BASE + 0xc0)
-#define AR_PHY_AGC_CONTROL       (AR_SM_BASE + 0xc4)
 #define AR_PHY_CALMODE           (AR_SM_BASE + 0xc8)
 #define AR_PHY_FCAL_1            (AR_SM_BASE + 0xcc)
 #define AR_PHY_FCAL_2_0          (AR_SM_BASE + 0xd0)
@@ -509,18 +508,6 @@
 #define AR_PHY_GC_ENABLE_DAC_FIFO  0x00000800  /* fifo between bb and dac */
 #define AR_PHY_RX_DELAY_DELAY      0x00003FFF  /* delay from wakeup to rx ena */
 
-#define AR_PHY_AGC_CONTROL_CAL              0x00000001  /* do internal calibration */
-#define AR_PHY_AGC_CONTROL_NF               0x00000002  /* do noise-floor calibration */
-#define AR_PHY_AGC_CONTROL_OFFSET_CAL       0x00000800  /* allow offset calibration */
-#define AR_PHY_AGC_CONTROL_ENABLE_NF        0x00008000  /* enable noise floor calibration to happen */
-#define AR_PHY_AGC_CONTROL_FLTR_CAL         0x00010000  /* allow tx filter calibration */
-#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF     0x00020000  /* don't update noise floor automatically */
-#define AR_PHY_AGC_CONTROL_EXT_NF_PWR_MEAS  0x00040000  /* extend noise floor power measurement */
-#define AR_PHY_AGC_CONTROL_CLC_SUCCESS      0x00080000  /* carrier leak calibration done */
-
-#define AR_PHY_AGC_CONTROL_YCOK_MAX         0x000003c0
-#define AR_PHY_AGC_CONTROL_YCOK_MAX_S                6
-
 #define AR_PHY_CALMODE_IQ           0x00000000
 #define AR_PHY_CALMODE_ADC_GAIN     0x00000001
 #define AR_PHY_CALMODE_ADC_DC_PER   0x00000002

diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 7758d99a84d46df8500453acd3d1665a59a52842..aacc29a5ad71285c2907419fb49132b7a63702d6 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -1776,4 +1776,19 @@ enum {
                                                     * pcu_txsm.
                                                     */
 
+#define AR9300_SM_BASE                         0xa200
+#define AR9002_PHY_AGC_CONTROL                 0x9860
+#define AR9003_PHY_AGC_CONTROL                 AR9300_SM_BASE + 0xc4
+#define AR_PHY_AGC_CONTROL                     (AR_SREV_9300_20_OR_LATER(ah) ? AR9003_PHY_AGC_CONTROL : AR9002_PHY_AGC_CONTROL)
+#define AR_PHY_AGC_CONTROL_CAL                 0x00000001  /* do internal calibration */
+#define AR_PHY_AGC_CONTROL_NF                  0x00000002  /* do noise-floor calibration */
+#define AR_PHY_AGC_CONTROL_OFFSET_CAL          0x00000800  /* allow offset calibration */
+#define AR_PHY_AGC_CONTROL_ENABLE_NF           0x00008000  /* enable noise floor calibration to happen */
+#define AR_PHY_AGC_CONTROL_FLTR_CAL            0x00010000  /* allow tx filter calibration */
+#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF                0x00020000  /* don't update noise floor automatically */
+#define AR_PHY_AGC_CONTROL_EXT_NF_PWR_MEAS     0x00040000  /* extend noise floor power measurement */
+#define AR_PHY_AGC_CONTROL_CLC_SUCCESS         0x00080000  /* carrier leak calibration done */
+#define AR_PHY_AGC_CONTROL_YCOK_MAX            0x000003c0
+#define AR_PHY_AGC_CONTROL_YCOK_MAX_S          6
+
 #endif