#define MAX_TAGS 32
#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/ctype.h>
#include <linux/delay.h>
-#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/nvram.h>
#include <linux/bitops.h>
#include <linux/wait.h>
+#include <linux/platform_device.h>
#include <asm/setup.h>
#include <asm/atarihw.h>
#include <asm/atariints.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-
-#include <scsi/scsi_host.h>
-#include "atari_scsi.h"
-#include "NCR5380.h"
#include <asm/atari_stdma.h>
#include <asm/atari_stram.h>
#include <asm/io.h>
-#include <linux/stat.h>
+#include <scsi/scsi_host.h>
+
+#include "atari_scsi.h"
+#include "NCR5380.h"
#define IS_A_TT() ATARIHW_PRESENT(TT_SCSI)
#define AFTER_RESET_DELAY (5*HZ/2)
#endif
-/***************************** Prototypes *****************************/
-
#ifdef REAL_DMA
static void atari_scsi_fetch_restbytes(void);
#endif
-static irqreturn_t scsi_tt_intr(int irq, void *dummy);
-static irqreturn_t scsi_falcon_intr(int irq, void *dummy);
-static void falcon_release_lock_if_possible(struct NCR5380_hostdata *hostdata);
-static int falcon_get_lock(void);
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
-static void atari_scsi_reset_boot(void);
-#endif
-static unsigned char atari_scsi_tt_reg_read(unsigned char reg);
-static void atari_scsi_tt_reg_write(unsigned char reg, unsigned char value);
-static unsigned char atari_scsi_falcon_reg_read(unsigned char reg);
-static void atari_scsi_falcon_reg_write(unsigned char reg, unsigned char value);
-
-/************************* End of Prototypes **************************/
-
static struct Scsi_Host *atari_scsi_host;
static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
return 1;
}
-
-static int __init atari_scsi_detect(struct scsi_host_template *host)
-{
- static int called = 0;
- struct Scsi_Host *instance;
-
- if (!MACH_IS_ATARI ||
- (!ATARIHW_PRESENT(ST_SCSI) && !ATARIHW_PRESENT(TT_SCSI)) ||
- called)
- return 0;
-
- host->proc_name = "Atari";
-
- atari_scsi_reg_read = IS_A_TT() ? atari_scsi_tt_reg_read :
- atari_scsi_falcon_reg_read;
- atari_scsi_reg_write = IS_A_TT() ? atari_scsi_tt_reg_write :
- atari_scsi_falcon_reg_write;
-
- /* setup variables */
- host->can_queue =
- (setup_can_queue > 0) ? setup_can_queue :
- IS_A_TT() ? ATARI_TT_CAN_QUEUE : ATARI_FALCON_CAN_QUEUE;
- host->cmd_per_lun =
- (setup_cmd_per_lun > 0) ? setup_cmd_per_lun :
- IS_A_TT() ? ATARI_TT_CMD_PER_LUN : ATARI_FALCON_CMD_PER_LUN;
- /* Force sg_tablesize to 0 on a Falcon! */
- host->sg_tablesize =
- !IS_A_TT() ? ATARI_FALCON_SG_TABLESIZE :
- (setup_sg_tablesize >= 0) ? setup_sg_tablesize : ATARI_TT_SG_TABLESIZE;
-
- if (setup_hostid >= 0)
- host->this_id = setup_hostid;
- else {
- /* use 7 as default */
- host->this_id = 7;
- /* Test if a host id is set in the NVRam */
- if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) {
- unsigned char b = nvram_read_byte( 14 );
- /* Arbitration enabled? (for TOS) If yes, use configured host ID */
- if (b & 0x80)
- host->this_id = b & 7;
- }
- }
-
-#ifdef SUPPORT_TAGS
- if (setup_use_tagged_queuing < 0)
- setup_use_tagged_queuing = 0;
-#endif
-#ifdef REAL_DMA
- /* If running on a Falcon and if there's TT-Ram (i.e., more than one
- * memory block, since there's always ST-Ram in a Falcon), then allocate a
- * STRAM_BUFFER_SIZE byte dribble buffer for transfers from/to alternative
- * Ram.
- */
- if (MACH_IS_ATARI && ATARIHW_PRESENT(ST_SCSI) &&
- !ATARIHW_PRESENT(EXTD_DMA) && m68k_num_memory > 1) {
- atari_dma_buffer = atari_stram_alloc(STRAM_BUFFER_SIZE, "SCSI");
- if (!atari_dma_buffer) {
- printk(KERN_ERR "atari_scsi_detect: can't allocate ST-RAM "
- "double buffer\n");
- return 0;
- }
- atari_dma_phys_buffer = atari_stram_to_phys(atari_dma_buffer);
- atari_dma_orig_addr = 0;
- }
-#endif
- instance = scsi_register(host, sizeof(struct NCR5380_hostdata));
- if (instance == NULL) {
- atari_stram_free(atari_dma_buffer);
- atari_dma_buffer = 0;
- return 0;
- }
- atari_scsi_host = instance;
- /*
- * Set irq to 0, to avoid that the mid-level code disables our interrupt
- * during queue_command calls. This is completely unnecessary, and even
- * worse causes bad problems on the Falcon, where the int is shared with
- * IDE and floppy!
- */
- instance->irq = 0;
-
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
- atari_scsi_reset_boot();
-#endif
- NCR5380_init(instance, 0);
-
- if (IS_A_TT()) {
-
- /* This int is actually "pseudo-slow", i.e. it acts like a slow
- * interrupt after having cleared the pending flag for the DMA
- * interrupt. */
- if (request_irq(IRQ_TT_MFP_SCSI, scsi_tt_intr, IRQ_TYPE_SLOW,
- "SCSI NCR5380", instance)) {
- printk(KERN_ERR "atari_scsi_detect: cannot allocate irq %d, aborting",IRQ_TT_MFP_SCSI);
- scsi_unregister(atari_scsi_host);
- atari_stram_free(atari_dma_buffer);
- atari_dma_buffer = 0;
- return 0;
- }
- tt_mfp.active_edge |= 0x80; /* SCSI int on L->H */
-#ifdef REAL_DMA
- tt_scsi_dma.dma_ctrl = 0;
- atari_dma_residual = 0;
-
- if (MACH_IS_MEDUSA) {
- /* While the read overruns (described by Drew Eckhardt in
- * NCR5380.c) never happened on TTs, they do in fact on the Medusa
- * (This was the cause why SCSI didn't work right for so long
- * there.) Since handling the overruns slows down a bit, I turned
- * the #ifdef's into a runtime condition.
- *
- * In principle it should be sufficient to do max. 1 byte with
- * PIO, but there is another problem on the Medusa with the DMA
- * rest data register. So 'atari_read_overruns' is currently set
- * to 4 to avoid having transfers that aren't a multiple of 4. If
- * the rest data bug is fixed, this can be lowered to 1.
- */
- atari_read_overruns = 4;
- }
-#endif /*REAL_DMA*/
- } else { /* ! IS_A_TT */
-
- /* Nothing to do for the interrupt: the ST-DMA is initialized
- * already by atari_init_INTS()
- */
-
-#ifdef REAL_DMA
- atari_dma_residual = 0;
- atari_dma_active = 0;
- atari_dma_stram_mask = (ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000
- : 0xff000000);
-#endif
- }
-
- called = 1;
- return 1;
-}
-
-static int atari_scsi_release(struct Scsi_Host *sh)
-{
- if (IS_A_TT())
- free_irq(IRQ_TT_MFP_SCSI, sh);
- if (atari_dma_buffer)
- atari_stram_free(atari_dma_buffer);
- NCR5380_exit(sh);
- return 1;
-}
-
#ifndef MODULE
static int __init atari_scsi_setup(char *str)
{
/* Format of atascsi parameter is:
* atascsi=<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
- * Defaults depend on TT or Falcon, hostid determined at run time.
+ * Defaults depend on TT or Falcon, determined at run time.
* Negative values mean don't change.
*/
int ints[6];
printk("atari_scsi_setup: no arguments!\n");
return 0;
}
-
- if (ints[0] >= 1) {
- if (ints[1] > 0)
- /* no limits on this, just > 0 */
- setup_can_queue = ints[1];
- }
- if (ints[0] >= 2) {
- if (ints[2] > 0)
- setup_cmd_per_lun = ints[2];
- }
- if (ints[0] >= 3) {
- if (ints[3] >= 0) {
- setup_sg_tablesize = ints[3];
- /* Must be <= SG_ALL (255) */
- if (setup_sg_tablesize > SG_ALL)
- setup_sg_tablesize = SG_ALL;
- }
- }
- if (ints[0] >= 4) {
- /* Must be between 0 and 7 */
- if (ints[4] >= 0 && ints[4] <= 7)
- setup_hostid = ints[4];
- else if (ints[4] > 7)
- printk("atari_scsi_setup: invalid host ID %d !\n", ints[4]);
- }
+ if (ints[0] >= 1)
+ setup_can_queue = ints[1];
+ if (ints[0] >= 2)
+ setup_cmd_per_lun = ints[2];
+ if (ints[0] >= 3)
+ setup_sg_tablesize = ints[3];
+ if (ints[0] >= 4)
+ setup_hostid = ints[4];
#ifdef SUPPORT_TAGS
- if (ints[0] >= 5) {
- if (ints[5] >= 0)
- setup_use_tagged_queuing = !!ints[5];
- }
+ if (ints[0] >= 5)
+ setup_use_tagged_queuing = ints[5];
#endif
return 1;
return rv;
}
-static struct scsi_host_template driver_template = {
+#define DRV_MODULE_NAME "atari_scsi"
+#define PFX DRV_MODULE_NAME ": "
+
+static struct scsi_host_template atari_scsi_template = {
+ .module = THIS_MODULE,
+ .proc_name = DRV_MODULE_NAME,
.show_info = atari_scsi_show_info,
.name = "Atari native SCSI",
- .detect = atari_scsi_detect,
- .release = atari_scsi_release,
.info = atari_scsi_info,
.queuecommand = atari_scsi_queue_command,
.eh_abort_handler = atari_scsi_abort,
.eh_bus_reset_handler = atari_scsi_bus_reset,
- .can_queue = 0, /* initialized at run-time */
- .this_id = 0, /* initialized at run-time */
- .sg_tablesize = 0, /* initialized at run-time */
- .cmd_per_lun = 0, /* initialized at run-time */
+ .this_id = 7,
.use_clustering = DISABLE_CLUSTERING
};
+static int __init atari_scsi_probe(struct platform_device *pdev)
+{
+ struct Scsi_Host *instance;
+ int error;
+ struct resource *irq;
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq)
+ return -ENODEV;
+
+ if (ATARIHW_PRESENT(TT_SCSI)) {
+ atari_scsi_reg_read = atari_scsi_tt_reg_read;
+ atari_scsi_reg_write = atari_scsi_tt_reg_write;
+ } else {
+ atari_scsi_reg_read = atari_scsi_falcon_reg_read;
+ atari_scsi_reg_write = atari_scsi_falcon_reg_write;
+ }
+
+ /* The values for CMD_PER_LUN and CAN_QUEUE are somehow arbitrary.
+ * Higher values should work, too; try it!
+ * (But cmd_per_lun costs memory!)
+ *
+ * But there seems to be a bug somewhere that requires CAN_QUEUE to be
+ * 2*CMD_PER_LUN. At least on a TT, no spurious timeouts seen since
+ * changed CMD_PER_LUN...
+ *
+ * Note: The Falcon currently uses 8/1 setting due to unsolved problems
+ * with cmd_per_lun != 1
+ */
+ if (ATARIHW_PRESENT(TT_SCSI)) {
+ atari_scsi_template.can_queue = 16;
+ atari_scsi_template.cmd_per_lun = 8;
+ atari_scsi_template.sg_tablesize = SG_ALL;
+ } else {
+ atari_scsi_template.can_queue = 8;
+ atari_scsi_template.cmd_per_lun = 1;
+ atari_scsi_template.sg_tablesize = SG_NONE;
+ }
+
+ if (setup_can_queue > 0)
+ atari_scsi_template.can_queue = setup_can_queue;
+
+ if (setup_cmd_per_lun > 0)
+ atari_scsi_template.cmd_per_lun = setup_cmd_per_lun;
+
+ /* Leave sg_tablesize at 0 on a Falcon! */
+ if (ATARIHW_PRESENT(TT_SCSI) && setup_sg_tablesize >= 0)
+ atari_scsi_template.sg_tablesize = setup_sg_tablesize;
+
+ if (setup_hostid >= 0) {
+ atari_scsi_template.this_id = setup_hostid & 7;
+ } else {
+ /* Test if a host id is set in the NVRam */
+ if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) {
+ unsigned char b = nvram_read_byte(14);
+
+ /* Arbitration enabled? (for TOS)
+ * If yes, use configured host ID
+ */
+ if (b & 0x80)
+ atari_scsi_template.this_id = b & 7;
+ }
+ }
+
+#ifdef SUPPORT_TAGS
+ if (setup_use_tagged_queuing < 0)
+ setup_use_tagged_queuing = 0;
+#endif
+
+#ifdef REAL_DMA
+ /* If running on a Falcon and if there's TT-Ram (i.e., more than one
+ * memory block, since there's always ST-Ram in a Falcon), then
+ * allocate a STRAM_BUFFER_SIZE byte dribble buffer for transfers
+ * from/to alternative Ram.
+ */
+ if (ATARIHW_PRESENT(ST_SCSI) && !ATARIHW_PRESENT(EXTD_DMA) &&
+ m68k_num_memory > 1) {
+ atari_dma_buffer = atari_stram_alloc(STRAM_BUFFER_SIZE, "SCSI");
+ if (!atari_dma_buffer) {
+ pr_err(PFX "can't allocate ST-RAM double buffer\n");
+ return -ENOMEM;
+ }
+ atari_dma_phys_buffer = atari_stram_to_phys(atari_dma_buffer);
+ atari_dma_orig_addr = 0;
+ }
+#endif
+
+ instance = scsi_host_alloc(&atari_scsi_template,
+ sizeof(struct NCR5380_hostdata));
+ if (!instance) {
+ error = -ENOMEM;
+ goto fail_alloc;
+ }
+ atari_scsi_host = instance;
+
+#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
+ atari_scsi_reset_boot();
+#endif
+
+ instance->irq = irq->start;
+
+ NCR5380_init(instance, 0);
+
+ if (IS_A_TT()) {
+ error = request_irq(instance->irq, scsi_tt_intr, 0,
+ "NCR5380", instance);
+ if (error) {
+ pr_err(PFX "request irq %d failed, aborting\n",
+ instance->irq);
+ goto fail_irq;
+ }
+ tt_mfp.active_edge |= 0x80; /* SCSI int on L->H */
+#ifdef REAL_DMA
+ tt_scsi_dma.dma_ctrl = 0;
+ atari_dma_residual = 0;
+
+ /* While the read overruns (described by Drew Eckhardt in
+ * NCR5380.c) never happened on TTs, they do in fact on the
+ * Medusa (This was the cause why SCSI didn't work right for
+ * so long there.) Since handling the overruns slows down
+ * a bit, I turned the #ifdef's into a runtime condition.
+ *
+ * In principle it should be sufficient to do max. 1 byte with
+ * PIO, but there is another problem on the Medusa with the DMA
+ * rest data register. So 'atari_read_overruns' is currently set
+ * to 4 to avoid having transfers that aren't a multiple of 4.
+ * If the rest data bug is fixed, this can be lowered to 1.
+ */
+ if (MACH_IS_MEDUSA)
+ atari_read_overruns = 4;
+#endif
+ } else {
+ /* Nothing to do for the interrupt: the ST-DMA is initialized
+ * already.
+ */
+#ifdef REAL_DMA
+ atari_dma_residual = 0;
+ atari_dma_active = 0;
+ atari_dma_stram_mask = (ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000
+ : 0xff000000);
+#endif
+ }
+
+ error = scsi_add_host(instance, NULL);
+ if (error)
+ goto fail_host;
+
+ platform_set_drvdata(pdev, instance);
+
+ scsi_scan_host(instance);
+ return 0;
+
+fail_host:
+ if (IS_A_TT())
+ free_irq(instance->irq, instance);
+fail_irq:
+ NCR5380_exit(instance);
+ scsi_host_put(instance);
+fail_alloc:
+ if (atari_dma_buffer)
+ atari_stram_free(atari_dma_buffer);
+ return error;
+}
+
+static int __exit atari_scsi_remove(struct platform_device *pdev)
+{
+ struct Scsi_Host *instance = platform_get_drvdata(pdev);
+
+ scsi_remove_host(instance);
+ if (IS_A_TT())
+ free_irq(instance->irq, instance);
+ NCR5380_exit(instance);
+ scsi_host_put(instance);
+ if (atari_dma_buffer)
+ atari_stram_free(atari_dma_buffer);
+ return 0;
+}
+
+static struct platform_driver atari_scsi_driver = {
+ .remove = __exit_p(atari_scsi_remove),
+ .driver = {
+ .name = DRV_MODULE_NAME,
+ .owner = THIS_MODULE,
+ },
+};
-#include "scsi_module.c"
+module_platform_driver_probe(atari_scsi_driver, atari_scsi_probe);
+MODULE_ALIAS("platform:" DRV_MODULE_NAME);
MODULE_LICENSE("GPL");
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff