hwmon: (w83791d) Clean up detect function
authorJean Delvare <khali@linux-fr.org>
Wed, 9 Dec 2009 19:35:55 +0000 (20:35 +0100)
committerJean Delvare <khali@linux-fr.org>
Wed, 9 Dec 2009 19:35:55 +0000 (20:35 +0100)
As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Marc Hulsman <m.hulsman@tudelft.nl>
drivers/hwmon/w83791d.c

index 97851c5ba3a3872caa715e130c3ff12a29c55297..0410bf12c5211cbb9bb27116d3dd343726adba8c 100644 (file)
@@ -1270,56 +1270,32 @@ static int w83791d_detect(struct i2c_client *client, int kind,
                return -ENODEV;
        }
 
-       /* The w83791d may be stuck in some other bank than bank 0. This may
-          make reading other information impossible. Specify a force=...
-          parameter, and the Winbond will be reset to the right bank. */
-       if (kind < 0) {
-               if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) {
-                       return -ENODEV;
-               }
-               val1 = w83791d_read(client, W83791D_REG_BANK);
-               val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
-               /* Check for Winbond ID if in bank 0 */
-               if (!(val1 & 0x07)) {
-                       /* yes it is Bank0 */
-                       if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
-                           ((val1 & 0x80) && (val2 != 0x5c))) {
-                               return -ENODEV;
-                       }
-               }
-               /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR
-                  should match */
-               if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) {
+       if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80)
+               return -ENODEV;
+
+       val1 = w83791d_read(client, W83791D_REG_BANK);
+       val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
+       /* Check for Winbond ID if in bank 0 */
+       if (!(val1 & 0x07)) {
+               if ((!(val1 & 0x80) && val2 != 0xa3) ||
+                   ( (val1 & 0x80) && val2 != 0x5c)) {
                        return -ENODEV;
                }
        }
+       /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR
+          should match */
+       if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address)
+               return -ENODEV;
 
-       /* We either have a force parameter or we have reason to
-          believe it is a Winbond chip. Either way, we want bank 0 and
-          Vendor ID high byte */
+       /* We want bank 0 and Vendor ID high byte */
        val1 = w83791d_read(client, W83791D_REG_BANK) & 0x78;
        w83791d_write(client, W83791D_REG_BANK, val1 | 0x80);
 
        /* Verify it is a Winbond w83791d */
-       if (kind <= 0) {
-               /* get vendor ID */
-               val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
-               if (val2 != 0x5c) {     /* the vendor is NOT Winbond */
-                       return -ENODEV;
-               }
-               val1 = w83791d_read(client, W83791D_REG_WCHIPID);
-               if (val1 == 0x71) {
-                       kind = w83791d;
-               } else {
-                       if (kind == 0)
-                               dev_warn(&adapter->dev,
-                                       "w83791d: Ignoring 'force' parameter "
-                                       "for unknown chip at adapter %d, "
-                                       "address 0x%02x\n",
-                                       i2c_adapter_id(adapter), address);
-                       return -ENODEV;
-               }
-       }
+       val1 = w83791d_read(client, W83791D_REG_WCHIPID);
+       val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
+       if (val1 != 0x71 || val2 != 0x5c)
+               return -ENODEV;
 
        strlcpy(info->type, "w83791d", I2C_NAME_SIZE);