i2c: rcar: check bus free before first message
authorWolfram Sang <wsa+renesas@sang-engineering.com>
Wed, 28 May 2014 07:44:40 +0000 (09:44 +0200)
committerWolfram Sang <wsa@the-dreams.de>
Sun, 1 Jun 2014 20:22:34 +0000 (22:22 +0200)
We should always check if the bus is free, independently if it is a read
or write. It should be done before the first message, though. After
that, we ourselves keep the bus busy. Remove a 'ret' assignment which
only silenced a build warning.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
drivers/i2c/busses/i2c-rcar.c

index f2cbb8a7d0ba1a2dc9ab2e52e660356998ff4221..828b519146fc22b572950661c799d32154a13aa0 100644 (file)
@@ -294,15 +294,6 @@ static int rcar_i2c_recv(struct rcar_i2c_priv *priv)
 
 static int rcar_i2c_send(struct rcar_i2c_priv *priv)
 {
-       int ret;
-
-       /*
-        * It should check bus status when send case
-        */
-       ret = rcar_i2c_bus_barrier(priv);
-       if (ret < 0)
-               return ret;
-
        rcar_i2c_set_addr(priv, 0);
        rcar_i2c_status_clear(priv);
        rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
@@ -508,7 +499,10 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
        spin_unlock_irqrestore(&priv->lock, flags);
        /*-------------- spin unlock -----------------*/
 
-       ret = -EINVAL;
+       ret = rcar_i2c_bus_barrier(priv);
+       if (ret < 0)
+               goto out;
+
        for (i = 0; i < num; i++) {
                /* This HW can't send STOP after address phase */
                if (msgs[i].len == 0) {
@@ -569,7 +563,7 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 
                ret = i + 1; /* The number of transfer */
        }
-
+out:
        pm_runtime_put(dev);
 
        if (ret < 0 && ret != -ENXIO)