config space writes, so it's quite possible that an I/O window of
the bridge will have some undesirable address (e.g. 0) after the
first write. Ditto 64-bit prefetchable MMIO. */
-static void pci_setup_bridge_io(struct pci_bus *bus)
+static void pci_setup_bridge_io(struct pci_dev *bridge)
{
- struct pci_dev *bridge = bus->self;
struct resource *res;
struct pci_bus_region region;
unsigned long io_mask;
io_mask = PCI_IO_1K_RANGE_MASK;
/* Set up the top and bottom of the PCI I/O segment for this bus. */
- res = bus->resource[0];
+ res = &bridge->resource[PCI_BRIDGE_RESOURCES + 0];
pcibios_resource_to_bus(bridge->bus, ®ion, res);
if (res->flags & IORESOURCE_IO) {
pci_read_config_word(bridge, PCI_IO_BASE, &l);
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
}
-static void pci_setup_bridge_mmio(struct pci_bus *bus)
+static void pci_setup_bridge_mmio(struct pci_dev *bridge)
{
- struct pci_dev *bridge = bus->self;
struct resource *res;
struct pci_bus_region region;
u32 l;
/* Set up the top and bottom of the PCI Memory segment for this bus. */
- res = bus->resource[1];
+ res = &bridge->resource[PCI_BRIDGE_RESOURCES + 1];
pcibios_resource_to_bus(bridge->bus, ®ion, res);
if (res->flags & IORESOURCE_MEM) {
l = (region.start >> 16) & 0xfff0;
pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
}
-static void pci_setup_bridge_mmio_pref(struct pci_bus *bus)
+static void pci_setup_bridge_mmio_pref(struct pci_dev *bridge)
{
- struct pci_dev *bridge = bus->self;
struct resource *res;
struct pci_bus_region region;
u32 l, bu, lu;
/* Set up PREF base/limit. */
bu = lu = 0;
- res = bus->resource[2];
+ res = &bridge->resource[PCI_BRIDGE_RESOURCES + 2];
pcibios_resource_to_bus(bridge->bus, ®ion, res);
if (res->flags & IORESOURCE_PREFETCH) {
l = (region.start >> 16) & 0xfff0;
&bus->busn_res);
if (type & IORESOURCE_IO)
- pci_setup_bridge_io(bus);
+ pci_setup_bridge_io(bridge);
if (type & IORESOURCE_MEM)
- pci_setup_bridge_mmio(bus);
+ pci_setup_bridge_mmio(bridge);
if (type & IORESOURCE_PREFETCH)
- pci_setup_bridge_mmio_pref(bus);
+ pci_setup_bridge_mmio_pref(bridge);
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
}