[PATCH] USB: add S3C24XX USB Host driver support
authorBen Dooks <ben-linux-usb@fluff.org>
Fri, 29 Jul 2005 19:18:03 +0000 (12:18 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Fri, 29 Jul 2005 20:12:53 +0000 (13:12 -0700)
USB (OHCI) Host driver for S3C2410/S3C2440 based systems

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/usb/Kconfig
drivers/usb/host/ohci-hcd.c
drivers/usb/host/ohci-s3c2410.c [new file with mode: 0644]

index cd329dd7fb8652e566c849c1a24fb3246b42a795..85dacc92545ae18b1a4d13a689047d2c9589bb8c 100644 (file)
@@ -20,6 +20,7 @@ config USB_ARCH_HAS_OHCI
        default y if SA1111
        default y if ARCH_OMAP
        default y if ARCH_LH7A404
+       default y if ARCH_S3C2410
        default y if PXA27x
        # PPC:
        default y if STB03xxx
index 68decab280ddd8c8d2a9766928a601cb4c73f38f..56b43f2a0e52c3eaaa750bebd7fb94e27f16d2bd 100644 (file)
@@ -887,6 +887,10 @@ MODULE_LICENSE ("GPL");
 #include "ohci-sa1111.c"
 #endif
 
+#ifdef CONFIG_ARCH_S3C2410
+#include "ohci-s3c2410.c"
+#endif
+
 #ifdef CONFIG_ARCH_OMAP
 #include "ohci-omap.c"
 #endif
@@ -909,6 +913,7 @@ MODULE_LICENSE ("GPL");
 
 #if !(defined(CONFIG_PCI) \
       || defined(CONFIG_SA1111) \
+      || defined(CONFIG_ARCH_S3C2410) \
       || defined(CONFIG_ARCH_OMAP) \
       || defined (CONFIG_ARCH_LH7A404) \
       || defined (CONFIG_PXA27x) \
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
new file mode 100644 (file)
index 0000000..e940166
--- /dev/null
@@ -0,0 +1,496 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * USB Bus Glue for Samsung S3C2410
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Rusell King et al.
+ *
+ * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
+ *     by Ben Dooks, <ben@simtec.co.uk>
+ *     Copyright (C) 2004 Simtec Electronics
+ *
+ * Thanks to basprog@mail.ru for updates to newer kernels
+ *
+ * This file is licenced under the GPL.
+*/
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/clock.h>
+#include <asm/arch/usb-control.h>
+
+#define valid_port(idx) ((idx) == 1 || (idx) == 2)
+
+/* clock device associated with the hcd */
+
+static struct clk *clk;
+
+/* forward definitions */
+
+static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
+
+/* conversion functions */
+
+struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
+{
+       return hcd->self.controller->platform_data;
+}
+
+static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
+{
+       struct s3c2410_hcd_info *info = dev->dev.platform_data;
+
+       dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
+       clk_enable(clk);
+
+       if (info != NULL) {
+               info->hcd       = hcd;
+               info->report_oc = s3c2410_hcd_oc;
+
+               if (info->enable_oc != NULL) {
+                       (info->enable_oc)(info, 1);
+               }
+       }
+}
+
+static void s3c2410_stop_hc(struct platform_device *dev)
+{
+       struct s3c2410_hcd_info *info = dev->dev.platform_data;
+
+       dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
+
+       if (info != NULL) {
+               info->report_oc = NULL;
+               info->hcd       = NULL;
+
+               if (info->enable_oc != NULL) {
+                       (info->enable_oc)(info, 0);
+               }
+       }
+
+       clk_disable(clk);
+}
+
+/* ohci_s3c2410_hub_status_data
+ *
+ * update the status data from the hub with anything that
+ * has been detected by our system
+*/
+
+static int
+ohci_s3c2410_hub_status_data (struct usb_hcd *hcd, char *buf)
+{
+       struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
+       struct s3c2410_hcd_port *port;
+       int orig;
+       int portno;
+
+       orig  = ohci_hub_status_data (hcd, buf);
+
+       if (info == NULL)
+               return orig;
+
+       port = &info->port[0];
+
+       /* mark any changed port as changed */
+
+       for (portno = 0; portno < 2; port++, portno++) {
+               if (port->oc_changed == 1 &&
+                   port->flags & S3C_HCDFLG_USED) {
+                       dev_dbg(hcd->self.controller,
+                               "oc change on port %d\n", portno);
+
+                       if (orig < 1)
+                               orig = 1;
+
+                       buf[0] |= 1<<(portno+1);
+               }
+       }
+
+       return orig;
+}
+
+/* s3c2410_usb_set_power
+ *
+ * configure the power on a port, by calling the platform device
+ * routine registered with the platform device
+*/
+
+static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
+                                 int port, int to)
+{
+       if (info == NULL)
+               return;
+
+       if (info->power_control != NULL) {
+               info->port[port-1].power = to;
+               (info->power_control)(port, to);
+       }
+}
+
+/* ohci_s3c2410_hub_control
+ *
+ * look at control requests to the hub, and see if we need
+ * to take any action or over-ride the results from the
+ * request.
+*/
+
+static int ohci_s3c2410_hub_control (
+       struct usb_hcd  *hcd,
+       u16             typeReq,
+       u16             wValue,
+       u16             wIndex,
+       char            *buf,
+       u16             wLength)
+{
+       struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
+       struct usb_hub_descriptor *desc;
+       int ret = -EINVAL;
+       u32 *data = (u32 *)buf;
+
+       dev_dbg(hcd->self.controller,
+               "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+               hcd, typeReq, wValue, wIndex, buf, wLength);
+
+       /* if we are only an humble host without any special capabilites
+        * process the request straight away and exit */
+
+       if (info == NULL) {
+               ret = ohci_hub_control(hcd, typeReq, wValue,
+                                      wIndex, buf, wLength);
+               goto out;
+       }
+
+       /* check the request to see if it needs handling */
+
+       switch (typeReq) {
+       case SetPortFeature:
+               if (wValue == USB_PORT_FEAT_POWER) {
+                       dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+                       s3c2410_usb_set_power(info, wIndex, 1);
+                       goto out;
+               }
+               break;
+
+       case ClearPortFeature:
+               switch (wValue) {
+               case USB_PORT_FEAT_C_OVER_CURRENT:
+                       dev_dbg(hcd->self.controller,
+                               "ClearPortFeature: C_OVER_CURRENT\n");
+
+                       if (valid_port(wIndex)) {
+                               info->port[wIndex-1].oc_changed = 0;
+                               info->port[wIndex-1].oc_status = 0;
+                       }
+
+                       goto out;
+
+               case USB_PORT_FEAT_OVER_CURRENT:
+                       dev_dbg(hcd->self.controller,
+                               "ClearPortFeature: OVER_CURRENT\n");
+
+                       if (valid_port(wIndex)) {
+                               info->port[wIndex-1].oc_status = 0;
+                       }
+
+                       goto out;
+
+               case USB_PORT_FEAT_POWER:
+                       dev_dbg(hcd->self.controller,
+                               "ClearPortFeature: POWER\n");
+
+                       if (valid_port(wIndex)) {
+                               s3c2410_usb_set_power(info, wIndex, 0);
+                               return 0;
+                       }
+               }
+               break;
+       }
+
+       ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+       if (ret)
+               goto out;
+
+       switch (typeReq) {
+       case GetHubDescriptor:
+
+               /* update the hub's descriptor */
+
+               desc = (struct usb_hub_descriptor *)buf;
+
+               if (info->power_control == NULL)
+                       return ret;
+
+               dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+                       desc->wHubCharacteristics);
+
+               /* remove the old configurations for power-switching, and
+                * over-current protection, and insert our new configuration
+                */
+
+               desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+               desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+
+               if (info->enable_oc) {
+                       desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+                       desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
+               }
+
+               dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+                       desc->wHubCharacteristics);
+
+               return ret;
+
+       case GetPortStatus:
+               /* check port status */
+
+               dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+               if (valid_port(wIndex)) {
+                       if (info->port[wIndex-1].oc_changed) {
+                               *data |= cpu_to_le32(RH_PS_OCIC);
+                       }
+
+                       if (info->port[wIndex-1].oc_status) {
+                               *data |= cpu_to_le32(RH_PS_POCI);
+                       }
+               }
+       }
+
+ out:
+       return ret;
+}
+
+/* s3c2410_hcd_oc
+ *
+ * handle an over-current report
+*/
+
+static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
+{
+       struct s3c2410_hcd_port *port;
+       struct usb_hcd *hcd;
+       unsigned long flags;
+       int portno;
+
+       if (info == NULL)
+               return;
+
+       port = &info->port[0];
+       hcd = info->hcd;
+
+       local_irq_save(flags);
+
+       for (portno = 0; portno < 2; port++, portno++) {
+               if (port_oc & (1<<portno) &&
+                   port->flags & S3C_HCDFLG_USED) {
+                       port->oc_status = 1;
+                       port->oc_changed = 1;
+
+                       /* ok, once over-current is detected,
+                          the port needs to be powered down */
+                       s3c2410_usb_set_power(info, portno+1, 0);
+               }
+       }
+
+       local_irq_restore(flags);
+}
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/*
+ * usb_hcd_s3c2410_remove - shutdown processing for HCD
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_3c2410_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+*/
+
+void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
+{
+       usb_remove_hcd(hcd);
+       s3c2410_stop_hc(dev);
+       iounmap(hcd->regs);
+       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+       usb_put_hcd(hcd);
+}
+
+/**
+ * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ */
+int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
+                          struct platform_device *dev)
+{
+       struct usb_hcd *hcd = NULL;
+       int retval;
+
+       s3c2410_usb_set_power(dev->dev.platform_data, 0, 1);
+       s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
+
+       hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
+       if (hcd == NULL)
+               return -ENOMEM;
+
+       hcd->rsrc_start = dev->resource[0].start;
+       hcd->rsrc_len   = dev->resource[0].end - dev->resource[0].start + 1;
+
+       if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+               dev_err(&dev->dev, "request_mem_region failed");
+               retval = -EBUSY;
+               goto err0;
+       }
+
+       clk = clk_get(NULL, "usb-host");
+       if (IS_ERR(clk)) {
+               dev_err(&dev->dev, "cannot get usb-host clock\n");
+               retval = -ENOENT;
+               goto err1;
+       }
+
+       clk_use(clk);
+       s3c2410_start_hc(dev, hcd);
+
+       hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+       if (!hcd->regs) {
+               dev_err(&dev->dev, "ioremap failed\n");
+               retval = -ENOMEM;
+               goto err2;
+       }
+
+       ohci_hcd_init(hcd_to_ohci(hcd));
+
+       retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+       if (retval != 0)
+               goto err2;
+
+       return 0;
+
+ err2:
+       s3c2410_stop_hc(dev);
+       iounmap(hcd->regs);
+       clk_unuse(clk);
+       clk_put(clk);
+
+ err1:
+       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ err0:
+       usb_put_hcd(hcd);
+       return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+ohci_s3c2410_start (struct usb_hcd *hcd)
+{
+       struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+       int ret;
+
+       if ((ret = ohci_init(ohci)) < 0)
+               return ret;
+
+       if ((ret = ohci_run (ohci)) < 0) {
+               err ("can't start %s", hcd->self.bus_name);
+               ohci_stop (hcd);
+               return ret;
+       }
+
+       return 0;
+}
+
+
+static const struct hc_driver ohci_s3c2410_hc_driver = {
+       .description =          hcd_name,
+       .product_desc =         "S3C24XX OHCI",
+       .hcd_priv_size =        sizeof(struct ohci_hcd),
+
+       /*
+        * generic hardware linkage
+        */
+       .irq =                  ohci_irq,
+       .flags =                HCD_USB11 | HCD_MEMORY,
+
+       /*
+        * basic lifecycle operations
+        */
+       .start =                ohci_s3c2410_start,
+       .stop =                 ohci_stop,
+
+       /*
+        * managing i/o requests and associated device resources
+        */
+       .urb_enqueue =          ohci_urb_enqueue,
+       .urb_dequeue =          ohci_urb_dequeue,
+       .endpoint_disable =     ohci_endpoint_disable,
+
+       /*
+        * scheduling support
+        */
+       .get_frame_number =     ohci_get_frame,
+
+       /*
+        * root hub support
+        */
+       .hub_status_data =      ohci_s3c2410_hub_status_data,
+       .hub_control =          ohci_s3c2410_hub_control,
+
+#if defined(CONFIG_USB_SUSPEND) && 0
+       .hub_suspend =          ohci_hub_suspend,
+       .hub_resume =           ohci_hub_resume,
+#endif
+};
+
+/* device driver */
+
+static int ohci_hcd_s3c2410_drv_probe(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
+}
+
+static int ohci_hcd_s3c2410_drv_remove(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+       usb_hcd_s3c2410_remove(hcd, pdev);
+       return 0;
+}
+
+static struct device_driver ohci_hcd_s3c2410_driver = {
+       .name           = "s3c2410-ohci",
+       .bus            = &platform_bus_type,
+       .probe          = ohci_hcd_s3c2410_drv_probe,
+       .remove         = ohci_hcd_s3c2410_drv_remove,
+       /*.suspend      = ohci_hcd_s3c2410_drv_suspend, */
+       /*.resume       = ohci_hcd_s3c2410_drv_resume, */
+};
+
+static int __init ohci_hcd_s3c2410_init (void)
+{
+       return driver_register(&ohci_hcd_s3c2410_driver);
+}
+
+static void __exit ohci_hcd_s3c2410_cleanup (void)
+{
+       driver_unregister(&ohci_hcd_s3c2410_driver);
+}
+
+module_init (ohci_hcd_s3c2410_init);
+module_exit (ohci_hcd_s3c2410_cleanup);