wiphy_rfkill_stop_polling(sc->hw->wiphy);
ath_deinit_leds(sc);
- for (i = 0; i < sc->num_sec_wiphy; i++) {
- struct ath_wiphy *aphy = sc->sec_wiphy[i];
- if (aphy == NULL)
- continue;
- sc->sec_wiphy[i] = NULL;
- ieee80211_unregister_hw(aphy->hw);
- ieee80211_free_hw(aphy->hw);
- }
-
+ ath9k_ps_restore(sc);
+
ieee80211_unregister_hw(hw);
pm_qos_remove_request(&sc->pm_qos_req);
ath_rx_cleanup(sc);
return;
}
+ ath9k_ps_wakeup(sc);
spin_lock(&sc->sc_pcu_lock);
- if (!ath9k_hw_check_alive(ah))
+ /*
+ * Only run the baseband hang check if beacons stop working in AP or
+ * IBSS mode, because it has a high false positive rate. For station
+ * mode it should not be necessary, since the upper layers will detect
+ * this through a beacon miss automatically and the following channel
+ * change will trigger a hardware reset anyway
+ */
+ if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0 &&
+ !ath9k_hw_check_alive(ah))
ieee80211_queue_work(sc->hw, &sc->hw_check_work);
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
ath_update_survey_nf(sc, old_pos);
}
-skip_chan_change:
if (changed & IEEE80211_CONF_CHANGE_POWER) {
sc->config.txpowlimit = 2 * conf->power_level;
+ ath9k_ps_wakeup(sc);
ath_update_txpow(sc);
+ ath9k_ps_restore(sc);
}
- spin_lock_bh(&sc->wiphy_lock);
- disable_radio = ath9k_all_wiphys_idle(sc);
- spin_unlock_bh(&sc->wiphy_lock);
-
if (disable_radio) {
ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
- sc->ps_idle = true;
ath_radio_disable(sc, hw);
}
goto end_no_lock;
}
/* determine default buffer size */
- if (buf_size == 0) {
- struct ieee80211_supported_band *sband;
-
- sband = local->hw.wiphy->bands[conf->channel->band];
- buf_size = IEEE80211_MIN_AMPDU_BUF;
- buf_size = buf_size << sband->ht_cap.ampdu_factor;
- }
+ if (buf_size == 0)
+ buf_size = IEEE80211_MAX_AMPDU_BUF;
+ /* make sure the size doesn't exceed the maximum supported by the hw */
+ if (buf_size > local->hw.max_rx_aggregation_subframes)
+ buf_size = local->hw.max_rx_aggregation_subframes;
/* examine state machine */
mutex_lock(&sta->ampdu_mlme.mtx);