[PATCH] sata_sil: separate out sil_init_controller()
authorTejun Heo <htejun@gmail.com>
Mon, 3 Jul 2006 07:07:27 +0000 (16:07 +0900)
committerJeff Garzik <jeff@garzik.org>
Thu, 6 Jul 2006 02:16:28 +0000 (22:16 -0400)
Separate out controller initialization from sil_init_one() into
sil_init_controller().  This will be used by resume.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/scsi/sata_sil.c

index 70dbfb8a7d51c0dd17130e9206fca90f31f43505..6033f796397f13965698c7e3b1e26e8ff0eda342 100644 (file)
@@ -561,6 +561,52 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
        }
 }
 
+static void sil_init_controller(struct pci_dev *pdev,
+                               int n_ports, unsigned long host_flags,
+                               void __iomem *mmio_base)
+{
+       u8 cls;
+       u32 tmp;
+       int i;
+
+       /* Initialize FIFO PCI bus arbitration */
+       cls = sil_get_device_cache_line(pdev);
+       if (cls) {
+               cls >>= 3;
+               cls++;  /* cls = (line_size/8)+1 */
+               for (i = 0; i < n_ports; i++)
+                       writew(cls << 8 | cls,
+                              mmio_base + sil_port[i].fifo_cfg);
+       } else
+               dev_printk(KERN_WARNING, &pdev->dev,
+                          "cache line size not set.  Driver may not function\n");
+
+       /* Apply R_ERR on DMA activate FIS errata workaround */
+       if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+               int cnt;
+
+               for (i = 0, cnt = 0; i < n_ports; i++) {
+                       tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+                       if ((tmp & 0x3) != 0x01)
+                               continue;
+                       if (!cnt)
+                               dev_printk(KERN_INFO, &pdev->dev,
+                                          "Applying R_ERR on DMA activate "
+                                          "FIS errata fix\n");
+                       writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+                       cnt++;
+               }
+       }
+
+       if (n_ports == 4) {
+               /* flip the magic "make 4 ports work" bit */
+               tmp = readl(mmio_base + sil_port[2].bmdma);
+               if ((tmp & SIL_INTR_STEERING) == 0)
+                       writel(tmp | SIL_INTR_STEERING,
+                              mmio_base + sil_port[2].bmdma);
+       }
+}
+
 static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
        static int printed_version;
@@ -570,8 +616,6 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
        int rc;
        unsigned int i;
        int pci_dev_busy = 0;
-       u32 tmp;
-       u8 cls;
 
        if (!printed_version++)
                dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -630,42 +674,8 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
                ata_std_ports(&probe_ent->port[i]);
        }
 
-       /* Initialize FIFO PCI bus arbitration */
-       cls = sil_get_device_cache_line(pdev);
-       if (cls) {
-               cls >>= 3;
-               cls++;  /* cls = (line_size/8)+1 */
-               for (i = 0; i < probe_ent->n_ports; i++)
-                       writew(cls << 8 | cls,
-                              mmio_base + sil_port[i].fifo_cfg);
-       } else
-               dev_printk(KERN_WARNING, &pdev->dev,
-                          "cache line size not set.  Driver may not function\n");
-
-       /* Apply R_ERR on DMA activate FIS errata workaround */
-       if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
-               int cnt;
-
-               for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
-                       tmp = readl(mmio_base + sil_port[i].sfis_cfg);
-                       if ((tmp & 0x3) != 0x01)
-                               continue;
-                       if (!cnt)
-                               dev_printk(KERN_INFO, &pdev->dev,
-                                          "Applying R_ERR on DMA activate "
-                                          "FIS errata fix\n");
-                       writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
-                       cnt++;
-               }
-       }
-
-       if (ent->driver_data == sil_3114) {
-               /* flip the magic "make 4 ports work" bit */
-               tmp = readl(mmio_base + sil_port[2].bmdma);
-               if ((tmp & SIL_INTR_STEERING) == 0)
-                       writel(tmp | SIL_INTR_STEERING,
-                              mmio_base + sil_port[2].bmdma);
-       }
+       sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags,
+                           mmio_base);
 
        pci_set_master(pdev);