}
}
if (print_dump)
- iwl_print_hex_dump(IWL_DL_RX, data, length);
+ iwl_print_hex_dump(priv, IWL_DL_RX, data, length);
}
static void iwl3945_dbg_report_frame(struct iwl_priv *priv,
struct iwl_rx_packet *pkt,
struct ieee80211_hdr *header, int group100)
{
- if (iwl_debug_level & IWL_DL_RX)
+ if (iwl_get_debug_level(priv) & IWL_DL_RX)
_iwl3945_dbg_report_frame(priv, pkt, header, group100);
}
#include "iwl-sta.h"
static int iwl4965_send_tx_power(struct iwl_priv *priv);
-static int iwl4965_hw_get_temperature(const struct iwl_priv *priv);
+static int iwl4965_hw_get_temperature(struct iwl_priv *priv);
/* Highest firmware API version supported */
#define IWL4965_UCODE_API_MAX 2
*
* A return of <0 indicates bogus data in the statistics
*/
-static int iwl4965_hw_get_temperature(const struct iwl_priv *priv)
+static int iwl4965_hw_get_temperature(struct iwl_priv *priv)
{
s32 temperature;
s32 vt;
iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_debug_level & IWL_DL_ISR) {
+ if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
/* just for debug */
inta_mask = iwl_read32(priv, CSR_INT_MASK);
IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
}
#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
if (inta & CSR_INT_BIT_SCD) {
IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
iwl_enable_interrupts(priv);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
inta = iwl_read32(priv, CSR_INT);
inta_mask = iwl_read32(priv, CSR_INT_MASK);
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
inta = priv->inta;
#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_debug_level & IWL_DL_ISR) {
+ if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
/* just for debug */
inta_mask = iwl_read32(priv, CSR_INT_MASK);
IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
}
#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
if (inta & CSR_INT_BIT_SCD) {
IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
*
* See the level definitions in iwl for details.
*
- * FIXME This file can be deprecated as the module parameter is
- * writable and users can thus also change the debug level
- * using the /sys/module/iwl3945/parameters/debug file.
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
*/
-
static ssize_t show_debug_level(struct device *d,
struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "0x%08X\n", iwl_debug_level);
+ struct iwl_priv *priv = dev_get_drvdata(d);
+ return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
}
static ssize_t store_debug_level(struct device *d,
struct device_attribute *attr,
if (ret)
IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
else
- iwl_debug_level = val;
+ priv->debug_level = val;
return strnlen(buf, count);
}
struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
IWL_DEBUG_RADIO(priv, "RX CONFIG:\n");
- iwl_print_hex_dump(IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
+ iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n",
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_debug_level & IWL_DL_FW_ERRORS) {
+ if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) {
iwl_dump_nic_error_log(priv);
iwl_dump_nic_event_log(priv);
iwl_print_rx_config_cmd(priv);
}
#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, "
"fh 0x%08x\n", inta, inta_mask, inta_fh);
IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
"notification for %s:\n",
le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
- iwl_print_hex_dump(IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
+ iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
}
EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif);
#ifdef CONFIG_IWLWIFI_DEBUG
#define IWL_DEBUG(__priv, level, fmt, args...) \
do { \
- if (iwl_debug_level & (level)) \
+ if (iwl_get_debug_level(__priv) & (level)) \
dev_printk(KERN_ERR, &(__priv->hw->wiphy->dev), \
"%c %s " fmt, in_interrupt() ? 'I' : 'U', \
__func__ , ## args); \
#define IWL_DEBUG_LIMIT(__priv, level, fmt, args...) \
do { \
- if ((iwl_debug_level & (level)) && net_ratelimit()) \
+ if ((iwl_get_debug_level(__priv) & (level)) && net_ratelimit()) \
dev_printk(KERN_ERR, &(__priv->hw->wiphy->dev), \
"%c %s " fmt, in_interrupt() ? 'I' : 'U', \
__func__ , ## args); \
} while (0)
-#define iwl_print_hex_dump(level, p, len) \
+#define iwl_print_hex_dump(priv, level, p, len) \
do { \
- if (iwl_debug_level & level) \
+ if (iwl_get_debug_level(priv) & level) \
print_hex_dump(KERN_DEBUG, "iwl data: ", \
DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \
} while (0)
#else
#define IWL_DEBUG(__priv, level, fmt, args...)
#define IWL_DEBUG_LIMIT(__priv, level, fmt, args...)
-static inline void iwl_print_hex_dump(int level, void *p, u32 len)
+static inline void iwl_print_hex_dump(struct iwl_priv *priv, int level,
+ void *p, u32 len)
{}
#endif /* CONFIG_IWLWIFI_DEBUG */
#ifdef CONFIG_IWLWIFI_DEBUG
/* debugging info */
+ u32 debug_level; /* per device debugging will override global
+ iwl_debug_level if set */
u32 framecnt_to_us;
atomic_t restrict_refcnt;
bool disable_ht40;
#ifdef CONFIG_IWLWIFI_DEBUG
const char *iwl_get_tx_fail_reason(u32 status);
+/*
+ * iwl_get_debug_level: Return active debug level for device
+ *
+ * Using sysfs it is possible to set per device debug level. This debug
+ * level will be used if set, otherwise the global debug level which can be
+ * set via module parameter is used.
+ */
+static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
+{
+ if (priv->debug_level)
+ return priv->debug_level;
+ else
+ return iwl_debug_level;
+}
#else
static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; }
+
+static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
+{
+ return iwl_debug_level;
+}
#endif
u32 tsf_low;
int rssi;
- if (likely(!(iwl_debug_level & IWL_DL_RX)))
+ if (likely(!(iwl_get_debug_level(priv) & IWL_DL_RX)))
return;
/* MAC header */
}
}
if (print_dump)
- iwl_print_hex_dump(IWL_DL_RX, header, length);
+ iwl_print_hex_dump(priv, IWL_DL_RX, header, length);
}
#endif
/* Set "1" to report good data frames in groups of 100 */
#ifdef CONFIG_IWLWIFI_DEBUG
- if (unlikely(iwl_debug_level & IWL_DL_RX))
+ if (unlikely(iwl_get_debug_level(priv) & IWL_DL_RX))
iwl_dbg_report_frame(priv, rx_start, len, header, 1);
#endif
IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n",
IWL_DEBUG_DROP(priv, "Station %pM not in station map. "
"Defaulting to broadcast...\n",
hdr->addr1);
- iwl_print_hex_dump(IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
+ iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
return priv->hw_params.bcast_sta_id;
default:
IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
le16_to_cpu(out_cmd->hdr.sequence));
IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
- iwl_print_hex_dump(IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd));
- iwl_print_hex_dump(IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
+ iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd));
+ iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
/* Set up entry for this TFD in Tx byte-count array */
if (info->flags & IEEE80211_TX_CTL_AMPDU)
IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
le16_to_cpu(out_cmd->hdr.sequence));
IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags));
- iwl_print_hex_dump(IWL_DL_TX, tx, sizeof(*tx));
- iwl_print_hex_dump(IWL_DL_TX, (u8 *)tx->hdr,
+ iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
+ iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
ieee80211_hdrlen(fc));
/*
iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_debug_level & IWL_DL_ISR) {
+ if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
/* just for debug */
inta_mask = iwl_read32(priv, CSR_INT_MASK);
IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
}
#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
if (inta & CSR_INT_BIT_SCD) {
IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
iwl_enable_interrupts(priv);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
inta = iwl_read32(priv, CSR_INT);
inta_mask = iwl_read32(priv, CSR_INT_MASK);
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
*
* See the level definitions in iwl for details.
*
- * FIXME This file can be deprecated as the module parameter is
- * writable and users can thus also change the debug level
- * using the /sys/module/iwl3945/parameters/debug file.
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
*/
static ssize_t show_debug_level(struct device *d,
struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "0x%08X\n", iwl_debug_level);
+ struct iwl_priv *priv = dev_get_drvdata(d);
+ return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
}
static ssize_t store_debug_level(struct device *d,
struct device_attribute *attr,
if (ret)
IWL_INFO(priv, "%s is not in hex or decimal form.\n", buf);
else
- iwl_debug_level = val;
+ priv->debug_level = val;
return strnlen(buf, count);
}