PCI: Mark RTL8110SC INTx masking as broken

INTx masking does not work on this device.  To see this, configure the
network device UP on an active network, note that the interrupt count
continues to increment for the device in /proc/interrupts.  Use setpci to
set the PCI_COMMAND_INTX_DISABLE bit in the PCI_COMMAND register.  As
expected, the interrupt count ceases to increment.  However, reading the
PCI_STATUS_INTERRUPT bit of the PCI_STATUS register does not indicate that
interrupts are pending and clearing PCI_COMMAND_INTX_DISABLE in the
PCI_COMMAND register does not allow the device to continue operation.

This does not affect operation of the host r8169 driver, but it does
prevent the device from being functional when assigned to a VM, such as
with QEMU and VFIO.  The guest driver successfully probes the device, but
there is no traffic.  Mark INTx masking as broken, allowing the more
restrictive APIC masking to be used instead.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 5e4ac635368fe3f57c5a7b6cbf0b9f3995f80796..72faccfb107cc62618b09ec977673c65cbb63952 100644 (file)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2991,6 +2991,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, 0x0030,
                         quirk_broken_intx_masking);
 DECLARE_PCI_FIXUP_HEADER(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */
                         quirk_broken_intx_masking);
+/*
+ * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10)
+ * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC
+ *
+ * RTL8110SC - Fails under PCI device assignment using DisINTx masking.
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_REALTEK, 0x8169,
+                        quirk_broken_intx_masking);
 
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
                          struct pci_fixup *end)