misc: eeprom_93xx46: Add support for a GPIO 'select' line.
authorCory Tusar <cory.tusar@pid1solutions.com>
Wed, 10 Feb 2016 19:32:08 +0000 (14:32 -0500)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 12 Feb 2016 03:23:28 +0000 (19:23 -0800)
This commit adds support to the eeprom_93x46 driver allowing a GPIO line
to function as a 'select' or 'enable' signal prior to accessing the
EEPROM.

Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com>
Tested-by: Chris Healy <chris.healy@zii.aero>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/misc/eeprom/eeprom_93xx46.c
include/linux/eeprom_93xx46.h

index a3c3136abf3e576b2d42b8ffcfbe7a281fcfe26b..f62ab29e293c044945a0b95828a2840f4b95f401 100644 (file)
 
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 #include <linux/sysfs.h>
@@ -343,6 +345,20 @@ static ssize_t eeprom_93xx46_store_erase(struct device *dev,
 }
 static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
 
+static void select_assert(void *context)
+{
+       struct eeprom_93xx46_dev *edev = context;
+
+       gpiod_set_value_cansleep(edev->pdata->select, 1);
+}
+
+static void select_deassert(void *context)
+{
+       struct eeprom_93xx46_dev *edev = context;
+
+       gpiod_set_value_cansleep(edev->pdata->select, 0);
+}
+
 static const struct of_device_id eeprom_93xx46_of_table[] = {
        { .compatible = "eeprom-93xx46", },
        { .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, },
@@ -357,6 +373,8 @@ static int eeprom_93xx46_probe_dt(struct spi_device *spi)
        struct device_node *np = spi->dev.of_node;
        struct eeprom_93xx46_platform_data *pd;
        u32 tmp;
+       int gpio;
+       enum of_gpio_flags of_flags;
        int ret;
 
        pd = devm_kzalloc(&spi->dev, sizeof(*pd), GFP_KERNEL);
@@ -381,6 +399,23 @@ static int eeprom_93xx46_probe_dt(struct spi_device *spi)
        if (of_property_read_bool(np, "read-only"))
                pd->flags |= EE_READONLY;
 
+       gpio = of_get_named_gpio_flags(np, "select-gpios", 0, &of_flags);
+       if (gpio_is_valid(gpio)) {
+               unsigned long flags =
+                       of_flags == OF_GPIO_ACTIVE_LOW ? GPIOF_ACTIVE_LOW : 0;
+
+               ret = devm_gpio_request_one(&spi->dev, gpio, flags,
+                                           "eeprom_93xx46_select");
+               if (ret)
+                       return ret;
+
+               pd->select = gpio_to_desc(gpio);
+               pd->prepare = select_assert;
+               pd->finish = select_deassert;
+
+               gpiod_direction_output(pd->select, 0);
+       }
+
        if (of_id->data) {
                const struct eeprom_93xx46_devtype_data *data = of_id->data;
 
index 92fa4c37ac1f7fc4690a17527133f51b1a0a1eef..885f587a35550cb1e4318beaeced8633fe4321e0 100644 (file)
@@ -3,6 +3,8 @@
  * platform description for 93xx46 EEPROMs.
  */
 
+struct gpio_desc;
+
 struct eeprom_93xx46_platform_data {
        unsigned char   flags;
 #define EE_ADDR8       0x01            /*  8 bit addr. cfg */
@@ -21,4 +23,5 @@ struct eeprom_93xx46_platform_data {
         */
        void (*prepare)(void *);
        void (*finish)(void *);
+       struct gpio_desc *select;
 };