--- /dev/null
+Kernel driver k10temp
+=====================
+
+Supported chips:
+* AMD Family 10h processors:
+ Socket F: Quad-Core/Six-Core/Embedded Opteron
+ Socket AM2+: Opteron, Phenom (II) X3/X4
+ Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
+ Socket S1G3: Athlon II, Sempron, Turion II
+* AMD Family 11h processors:
+ Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+
+ Prefix: 'k10temp'
+ Addresses scanned: PCI space
+ Datasheets:
+ BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors:
+ http://support.amd.com/us/Processor_TechDocs/31116.pdf
+ BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
+ http://support.amd.com/us/Processor_TechDocs/41256.pdf
+ Revision Guide for AMD Family 10h Processors:
+ http://support.amd.com/us/Processor_TechDocs/41322.pdf
+ Revision Guide for AMD Family 11h Processors:
+ http://support.amd.com/us/Processor_TechDocs/41788.pdf
+ AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
+ http://support.amd.com/us/Processor_TechDocs/43373.pdf
+ AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
+ http://support.amd.com/us/Processor_TechDocs/43374.pdf
+ AMD Family 10h Desktop Processor Power and Thermal Data Sheet:
+ http://support.amd.com/us/Processor_TechDocs/43375.pdf
+
+Author: Clemens Ladisch <clemens@ladisch.de>
+
+Description
+-----------
+
+This driver permits reading of the internal temperature sensor of AMD
+Family 10h and 11h processors.
+
+All these processors have a sensor, but on older revisions of Family 10h
+processors, the sensor may return inconsistent values (erratum 319). The
+driver will refuse to load on these revisions unless you specify the
+"force=1" module parameter.
+
+There is one temperature measurement value, available as temp1_input in
+sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.
+Please note that it is defined as a relative value; to quote the AMD manual:
+
+ Tctl is the processor temperature control value, used by the platform to
+ control cooling systems. Tctl is a non-physical temperature on an
+ arbitrary scale measured in degrees. It does _not_ represent an actual
+ physical temperature like die or case temperature. Instead, it specifies
+ the processor temperature relative to the point at which the system must
+ supply the maximum cooling for the processor's specified maximum case
+ temperature and maximum thermal power dissipation.
+
+The maximum value for Tctl is available in the file temp1_max.
+
+If the BIOS has enabled hardware temperature control, the threshold at
+which the processor will throttle itself to avoid damage is available in
+temp1_crit and temp1_crit_hyst.
--- /dev/null
+/*
+ * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ *
+ * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ * This driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <asm/processor.h>
+
+MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
+MODULE_LICENSE("GPL");
+
+static bool force;
+module_param(force, bool, 0444);
+MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
+
+#define REG_HARDWARE_THERMAL_CONTROL 0x64
+#define HTC_ENABLE 0x00000001
+
+#define REG_REPORTED_TEMPERATURE 0xa4
+
+#define REG_NORTHBRIDGE_CAPABILITIES 0xe8
+#define NB_CAP_HTC 0x00000400
+
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 regval;
+
+ pci_read_config_dword(to_pci_dev(dev),
+ REG_REPORTED_TEMPERATURE, ®val);
+ return sprintf(buf, "%u\n", (regval >> 21) * 125);
+}
+
+static ssize_t show_temp_max(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", 70 * 1000);
+}
+
+static ssize_t show_temp_crit(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int show_hyst = attr->index;
+ u32 regval;
+ int value;
+
+ pci_read_config_dword(to_pci_dev(dev),
+ REG_HARDWARE_THERMAL_CONTROL, ®val);
+ value = ((regval >> 16) & 0x7f) * 500 + 52000;
+ if (show_hyst)
+ value -= ((regval >> 24) & 0xf) * 500;
+ return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "k10temp\n");
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static bool __devinit has_erratum_319(void)
+{
+ /*
+ * Erratum 319: The thermal sensor of older Family 10h processors
+ * (B steppings) may be unreliable.
+ */
+ return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2;
+}
+
+static int __devinit k10temp_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct device *hwmon_dev;
+ u32 reg_caps, reg_htc;
+ int err;
+
+ if (has_erratum_319() && !force) {
+ dev_err(&pdev->dev,
+ "unreliable CPU thermal sensor; monitoring disabled\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ err = device_create_file(&pdev->dev, &dev_attr_temp1_input);
+ if (err)
+ goto exit;
+ err = device_create_file(&pdev->dev, &dev_attr_temp1_max);
+ if (err)
+ goto exit_remove;
+
+ pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES, ®_caps);
+ pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, ®_htc);
+ if ((reg_caps & NB_CAP_HTC) && (reg_htc & HTC_ENABLE)) {
+ err = device_create_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit.dev_attr);
+ if (err)
+ goto exit_remove;
+ err = device_create_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit_hyst.dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
+ err = device_create_file(&pdev->dev, &dev_attr_name);
+ if (err)
+ goto exit_remove;
+
+ hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon_dev)) {
+ err = PTR_ERR(hwmon_dev);
+ goto exit_remove;
+ }
+ dev_set_drvdata(&pdev->dev, hwmon_dev);
+
+ if (has_erratum_319() && force)
+ dev_warn(&pdev->dev,
+ "unreliable CPU thermal sensor; check erratum 319\n");
+ return 0;
+
+exit_remove:
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ device_remove_file(&pdev->dev, &dev_attr_temp1_input);
+ device_remove_file(&pdev->dev, &dev_attr_temp1_max);
+ device_remove_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit.dev_attr);
+ device_remove_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit_hyst.dev_attr);
+exit:
+ return err;
+}
+
+static void __devexit k10temp_remove(struct pci_dev *pdev)
+{
+ hwmon_device_unregister(dev_get_drvdata(&pdev->dev));
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ device_remove_file(&pdev->dev, &dev_attr_temp1_input);
+ device_remove_file(&pdev->dev, &dev_attr_temp1_max);
+ device_remove_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit.dev_attr);
+ device_remove_file(&pdev->dev,
+ &sensor_dev_attr_temp1_crit_hyst.dev_attr);
+ dev_set_drvdata(&pdev->dev, NULL);
+}
+
+static struct pci_device_id k10temp_id_table[] = {
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+ {}
+};
+MODULE_DEVICE_TABLE(pci, k10temp_id_table);
+
+static struct pci_driver k10temp_driver = {
+ .name = "k10temp",
+ .id_table = k10temp_id_table,
+ .probe = k10temp_probe,
+ .remove = __devexit_p(k10temp_remove),
+};
+
+static int __init k10temp_init(void)
+{
+ return pci_register_driver(&k10temp_driver);
+}
+
+static void __exit k10temp_exit(void)
+{
+ pci_unregister_driver(&k10temp_driver);
+}
+
+module_init(k10temp_init)
+module_exit(k10temp_exit)
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff