isci: clean up remaining silicon revision ifdefs in phy init

Use the dynamic revision detection code in
scic_sds_phy_link_layer_initialization() and apply some coding style
fixups (long deref chains).  The compile time max link rate setting is
removed in favor of honoring the user-parameter max.

Reported-by: Krzysztof Wierzbicki <Krzysztof.Wierzbicki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h
index 8bd85605130cd3f720855476ce2b9e8fccf75f5d..485fefc08883b4bae4da56b7efb754f9c3cb6e1a 100644 (file)
--- a/drivers/scsi/isci/core/scic_config_parameters.h
+++ b/drivers/scsi/isci/core/scic_config_parameters.h
@@ -114,7 +114,7 @@ struct scic_sds_controller;
  *
  */
 struct scic_sds_user_parameters {
-       struct {
+       struct sci_phy_user_params {
                /**
                 * This field specifies the NOTIFY (ENABLE SPIN UP) primitive
                 * insertion frequency for this phy index.
@@ -250,7 +250,7 @@ struct scic_sds_oem_parameters {
 
        } ports[SCI_MAX_PORTS];
 
-       struct {
+       struct sci_phy_oem_params {
                /**
                 * This field specifies the SAS address to be transmitted on
                 * for this phy index.

diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c
index d9fca9976889718e4fd9ca177ba564207ddfbb71..e8d09fd935eccca9c6eee3f6708d3ac51036cb2f 100644 (file)
--- a/drivers/scsi/isci/core/scic_sds_controller.c
+++ b/drivers/scsi/isci/core/scic_sds_controller.c
@@ -584,21 +584,6 @@ void scic_sds_controller_enable_port_task_scheduler(
  */
 #define AFE_REGISTER_WRITE_DELAY 10
 
-static bool is_a0(void)
-{
-       return isci_si_rev == ISCI_SI_REVA0;
-}
-
-static bool is_a2(void)
-{
-       return isci_si_rev == ISCI_SI_REVA2;
-}
-
-static bool is_b0(void)
-{
-       return isci_si_rev > ISCI_SI_REVA2;
-}
-
 /* Initialize the AFE for this phy index. We need to read the AFE setup from
  * the OEM parameters none
  */

diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c
index ecd7cc698ae61cf2f5a2fcc4592ee33c600b67b6..e8d5be73cd0be6b4a873620bf8ae6225be3f8024 100644 (file)
--- a/drivers/scsi/isci/core/scic_sds_phy.c
+++ b/drivers/scsi/isci/core/scic_sds_phy.c
@@ -111,62 +111,55 @@ static enum sci_status scic_sds_phy_transport_layer_initialization(
 
 /**
  * This method will initialize the phy link layer registers
- * @this_phy:
+ * @sci_phy:
  * @link_layer_registers:
  *
  * enum sci_status
  */
-static enum sci_status scic_sds_phy_link_layer_initialization(
-       struct scic_sds_phy *this_phy,
-       struct scu_link_layer_registers __iomem *link_layer_registers)
+static enum sci_status
+scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
+                                      struct scu_link_layer_registers __iomem *link_layer_registers)
 {
+       struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
+       int phy_idx = sci_phy->phy_index;
+       struct sci_phy_user_params *phy_user = &scic->user_parameters.sds1.phys[phy_idx];
+       struct sci_phy_oem_params *phy_oem = &scic->oem_parameters.sds1.phys[phy_idx];
        u32 phy_configuration;
        struct sas_capabilities phy_capabilities;
        u32 parity_check = 0;
        u32 parity_count = 0;
-       u32 link_layer_control;
+       u32 llctl, link_rate;
        u32 clksm_value = 0;
 
-       this_phy->link_layer_registers = link_layer_registers;
+       sci_phy->link_layer_registers = link_layer_registers;
 
        /* Set our IDENTIFY frame data */
        #define SCI_END_DEVICE 0x01
 
-       SCU_SAS_TIID_WRITE(
-               this_phy,
-               (SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR)
-                | SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR)
-                | SCU_SAS_TIID_GEN_BIT(STP_INITIATOR)
-                | SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST)
-                | SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE))
-               );
+       SCU_SAS_TIID_WRITE(sci_phy, (SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) |
+                                    SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) |
+                                    SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) |
+                                    SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) |
+                                    SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE)));
 
        /* Write the device SAS Address */
-       SCU_SAS_TIDNH_WRITE(this_phy, 0xFEDCBA98);
-       SCU_SAS_TIDNL_WRITE(this_phy, this_phy->phy_index);
+       SCU_SAS_TIDNH_WRITE(sci_phy, 0xFEDCBA98);
+       SCU_SAS_TIDNL_WRITE(sci_phy, phy_idx);
 
        /* Write the source SAS Address */
-       SCU_SAS_TISSAH_WRITE(
-               this_phy,
-               this_phy->owning_port->owning_controller->oem_parameters.sds1.phys[
-                       this_phy->phy_index].sas_address.high
-               );
-       SCU_SAS_TISSAL_WRITE(
-               this_phy,
-               this_phy->owning_port->owning_controller->oem_parameters.sds1.phys[
-                       this_phy->phy_index].sas_address.low
-               );
+       SCU_SAS_TISSAH_WRITE(sci_phy, phy_oem->sas_address.high);
+       SCU_SAS_TISSAL_WRITE(sci_phy, phy_oem->sas_address.low);
 
        /* Clear and Set the PHY Identifier */
-       SCU_SAS_TIPID_WRITE(this_phy, 0x00000000);
-       SCU_SAS_TIPID_WRITE(this_phy, SCU_SAS_TIPID_GEN_VALUE(ID, this_phy->phy_index));
+       SCU_SAS_TIPID_WRITE(sci_phy, 0x00000000);
+       SCU_SAS_TIPID_WRITE(sci_phy, SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx));
 
        /* Change the initial state of the phy configuration register */
-       phy_configuration = SCU_SAS_PCFG_READ(this_phy);
+       phy_configuration = SCU_SAS_PCFG_READ(sci_phy);
 
        /* Hold OOB state machine in reset */
        phy_configuration |=  SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
-       SCU_SAS_PCFG_WRITE(this_phy, phy_configuration);
+       SCU_SAS_PCFG_WRITE(sci_phy, phy_configuration);
 
        /* Configure the SNW capabilities */
        phy_capabilities.u.all = 0;
@@ -174,8 +167,7 @@ static enum sci_status scic_sds_phy_link_layer_initialization(
        phy_capabilities.u.bits.gen3_without_ssc_supported = 1;
        phy_capabilities.u.bits.gen2_without_ssc_supported = 1;
        phy_capabilities.u.bits.gen1_without_ssc_supported = 1;
-       if (this_phy->owning_port->owning_controller->oem_parameters.sds1.
-           controller.do_enable_ssc == true) {
+       if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) {
                phy_capabilities.u.bits.gen3_with_ssc_supported = 1;
                phy_capabilities.u.bits.gen2_with_ssc_supported = 1;
                phy_capabilities.u.bits.gen1_with_ssc_supported = 1;
@@ -197,93 +189,66 @@ static enum sci_status scic_sds_phy_link_layer_initialization(
        if ((parity_count % 2) != 0)
                phy_capabilities.u.bits.parity = 1;
 
-       SCU_SAS_PHYCAP_WRITE(this_phy, phy_capabilities.u.all);
+       SCU_SAS_PHYCAP_WRITE(sci_phy, phy_capabilities.u.all);
 
-       /* Set the enable spinup period but disable the ability to send notify enable spinup */
-       SCU_SAS_ENSPINUP_WRITE(this_phy, SCU_ENSPINUP_GEN_VAL(COUNT,
-               this_phy->owning_port->owning_controller->user_parameters.sds1.
-               phys[this_phy->phy_index].notify_enable_spin_up_insertion_frequency));
+       /* Set the enable spinup period but disable the ability to send
+        * notify enable spinup
+        */
+       SCU_SAS_ENSPINUP_WRITE(sci_phy, SCU_ENSPINUP_GEN_VAL(COUNT,
+                              phy_user->notify_enable_spin_up_insertion_frequency));
 
-       /* Write the ALIGN Insertion Ferequency for connected phy and inpendent of connected state */
+       /* Write the ALIGN Insertion Ferequency for connected phy and
+        * inpendent of connected state
+        */
        clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED,
-               this_phy->owning_port->owning_controller->user_parameters.sds1.
-                       phys[this_phy->phy_index].in_connection_align_insertion_frequency);
+                       phy_user->in_connection_align_insertion_frequency);
 
        clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
-               this_phy->owning_port->owning_controller->user_parameters.sds1.
-                       phys[this_phy->phy_index].align_insertion_frequency);
-
-       SCU_SAS_CLKSM_WRITE(this_phy, clksm_value);
-
-#if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) || defined(CONFIG_PBG_HBA_BETA)
-       /* / @todo Provide a way to write this register correctly */
-       scu_link_layer_register_write(this_phy, afe_lookup_table_control, 0x02108421);
-#else
-       /* / @todo Provide a way to write this register correctly */
-       scu_link_layer_register_write(this_phy, afe_lookup_table_control, 0x0e739ce7);
-#endif
-
-       link_layer_control = SCU_SAS_LLCTL_GEN_VAL(
-               NO_OUTBOUND_TASK_TIMEOUT,
-               (u8)this_phy->owning_port->owning_controller->
-               user_parameters.sds1.no_outbound_task_timeout
-               );
+                       phy_user->align_insertion_frequency);
 
-/* #define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 */
-/* #define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2 */
-#define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3
+       SCU_SAS_CLKSM_WRITE(sci_phy, clksm_value);
 
-       if (this_phy->owning_port->owning_controller->user_parameters.sds1.
-           phys[this_phy->phy_index].max_speed_generation == SCIC_SDS_PARM_GEN3_SPEED) {
-               link_layer_control |= SCU_SAS_LLCTL_GEN_VAL(
-                       MAX_LINK_RATE, COMPILED_MAX_LINK_RATE
-                       );
-       } else if (this_phy->owning_port->owning_controller->user_parameters.sds1.
-                  phys[this_phy->phy_index].max_speed_generation == SCIC_SDS_PARM_GEN2_SPEED) {
-               link_layer_control |= SCU_SAS_LLCTL_GEN_VAL(
-                       MAX_LINK_RATE,
-                       min(
-                               SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2,
-                               COMPILED_MAX_LINK_RATE)
-                       );
-       } else {
-               link_layer_control |= SCU_SAS_LLCTL_GEN_VAL(
-                       MAX_LINK_RATE,
-                       min(
-                               SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1,
-                               COMPILED_MAX_LINK_RATE)
-                       );
-       }
+       /* @todo Provide a way to write this register correctly */
+       scu_link_layer_register_write(sci_phy, afe_lookup_table_control, 0x02108421);
 
-       scu_link_layer_register_write(
-               this_phy, link_layer_control, link_layer_control
-               );
+       llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT,
+               (u8)scic->user_parameters.sds1.no_outbound_task_timeout);
 
-       /*
-        * Program the max ARB time for the PHY to 700us so we inter-operate with
-        * the PMC expander which shuts down PHYs if the expander PHY generates too
-        * many breaks.  This time value will guarantee that the initiator PHY will
-        * generate the break. */
-#if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2)
-       scu_link_layer_register_write(
-               this_phy,
-               maximum_arbitration_wait_timer_timeout,
-               SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME
-               );
-#endif  /* defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) */
+       switch(phy_user->max_speed_generation) {
+       case SCIC_SDS_PARM_GEN3_SPEED:
+               link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3;
+               break;
+       case SCIC_SDS_PARM_GEN2_SPEED:
+               link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2;
+               break;
+       default:
+               link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1;
+               break;
+       }
+       llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
+
+       scu_link_layer_register_write(sci_phy, link_layer_control, llctl);
+
+       if (is_a0() || is_a2()) {
+               /* Program the max ARB time for the PHY to 700us so we inter-operate with
+                * the PMC expander which shuts down PHYs if the expander PHY generates too
+                * many breaks.  This time value will guarantee that the initiator PHY will
+                * generate the break.
+                */
+               scu_link_layer_register_write(sci_phy,
+                                             maximum_arbitration_wait_timer_timeout,
+                                             SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME);
+       }
 
        /*
         * Set the link layer hang detection to 500ms (0x1F4) from its default
         * value of 128ms.  Max value is 511 ms. */
-       scu_link_layer_register_write(
-               this_phy, link_layer_hang_detection_timeout, 0x1F4
-               );
+       scu_link_layer_register_write(sci_phy, link_layer_hang_detection_timeout,
+                                     0x1F4);
 
        /* We can exit the initial state to the stopped state */
-       sci_base_state_machine_change_state(
-               scic_sds_phy_get_base_state_machine(this_phy),
-               SCI_BASE_PHY_STATE_STOPPED
-               );
+       sci_base_state_machine_change_state(scic_sds_phy_get_base_state_machine(sci_phy),
+                                           SCI_BASE_PHY_STATE_STOPPED);
 
        return SCI_SUCCESS;
 }

diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h
index e1020ee6c38eac91b97bb3a6e02f12c55a13becb..8d57f9552e28ddbe7ebe09e4840944282de98669 100644 (file)
--- a/drivers/scsi/isci/sci_environment.h
+++ b/drivers/scsi/isci/sci_environment.h
@@ -108,5 +108,19 @@ enum {
 
 extern int isci_si_rev;
 
+static inline bool is_a0(void)
+{
+       return isci_si_rev == ISCI_SI_REVA0;
+}
+
+static inline bool is_a2(void)
+{
+       return isci_si_rev == ISCI_SI_REVA2;
+}
+
+static inline bool is_b0(void)
+{
+       return isci_si_rev > ISCI_SI_REVA2;
+}
 
 #endif