[PATCH] sky2: ratelimit error messages
authorStephen Hemminger <shemminger@osdl.org>
Tue, 17 Jan 2006 21:43:17 +0000 (13:43 -0800)
committerJeff Garzik <jgarzik@pobox.com>
Wed, 18 Jan 2006 00:27:30 +0000 (19:27 -0500)
Make sure and rate limit all the error messages that might occur. If a problem
occurs then a few messages are enough.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
drivers/net/sky2.c

index 92ea915c1d4bdfbe62e5d77e30241d485555e8e8..9308b3bbb5cb7e56bb603a533ea3ebb1858d5528 100644 (file)
@@ -92,7 +92,7 @@
 static const u32 default_msg =
     NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
     | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
-    | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_INTR;
+    | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
 
 static int debug = -1;         /* defaults above */
 module_param(debug, int, 0);
@@ -1125,8 +1125,9 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
                 */
                if (!netif_queue_stopped(dev)) {
                        netif_stop_queue(dev);
-                       printk(KERN_WARNING PFX "%s: ring full when queue awake!\n",
-                              dev->name);
+                       if (net_ratelimit())
+                               printk(KERN_WARNING PFX "%s: ring full when queue awake!\n",
+                                      dev->name);
                }
                spin_unlock(&sky2->tx_lock);
 
@@ -1770,7 +1771,7 @@ oversize:
 error:
        ++sky2->net_stats.rx_errors;
 
-       if (netif_msg_rx_err(sky2))
+       if (netif_msg_rx_err(sky2) && net_ratelimit())
                printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n",
                       sky2->netdev->name, status, length);
 
@@ -1920,35 +1921,42 @@ static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
 {
        struct net_device *dev = hw->dev[port];
 
-       printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
-              dev->name, status);
+       if (net_ratelimit())
+               printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
+                      dev->name, status);
 
        if (status & Y2_IS_PAR_RD1) {
-               printk(KERN_ERR PFX "%s: ram data read parity error\n",
-                      dev->name);
+               if (net_ratelimit())
+                       printk(KERN_ERR PFX "%s: ram data read parity error\n",
+                              dev->name);
                /* Clear IRQ */
                sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
        }
 
        if (status & Y2_IS_PAR_WR1) {
-               printk(KERN_ERR PFX "%s: ram data write parity error\n",
-                      dev->name);
+               if (net_ratelimit())
+                       printk(KERN_ERR PFX "%s: ram data write parity error\n",
+                              dev->name);
 
                sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
        }
 
        if (status & Y2_IS_PAR_MAC1) {
-               printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
+               if (net_ratelimit())
+                       printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
                sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
        }
 
        if (status & Y2_IS_PAR_RX1) {
-               printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
+               if (net_ratelimit())
+                       printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
                sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
        }
 
        if (status & Y2_IS_TCP_TXA1) {
-               printk(KERN_ERR PFX "%s: TCP segmentation error\n", dev->name);
+               if (net_ratelimit())
+                       printk(KERN_ERR PFX "%s: TCP segmentation error\n",
+                              dev->name);
                sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
        }
 }
@@ -1964,8 +1972,9 @@ static void sky2_hw_intr(struct sky2_hw *hw)
                u16 pci_err;
 
                pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err);
-               printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
-                      pci_name(hw->pdev), pci_err);
+               if (net_ratelimit())
+                       printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
+                              pci_name(hw->pdev), pci_err);
 
                sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
                pci_write_config_word(hw->pdev, PCI_STATUS,
@@ -1979,8 +1988,9 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 
                pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err);
 
-               printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
-                      pci_name(hw->pdev), pex_err);
+               if (net_ratelimit())
+                       printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
+                              pci_name(hw->pdev), pex_err);
 
                /* clear the interrupt */
                sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);