e1000e: consolidate two dbug macros into one simpler one
authorBruce Allan <bruce.w.allan@intel.com>
Fri, 20 Nov 2009 23:25:07 +0000 (23:25 +0000)
committerDavid S. Miller <davem@davemloft.net>
Sat, 21 Nov 2009 19:34:05 +0000 (11:34 -0800)
This patch depends on a previous one that cleans up redundant #includes.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/e1000e/82571.c
drivers/net/e1000e/e1000.h
drivers/net/e1000e/es2lan.c
drivers/net/e1000e/hw.h
drivers/net/e1000e/ich8lan.c
drivers/net/e1000e/lib.c
drivers/net/e1000e/netdev.c
drivers/net/e1000e/phy.c

index 407637f6c331d486de563d2998905e50453732ac..680b7c703062ffa1b150544f5cc90c6c7934159f 100644 (file)
@@ -309,7 +309,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
                         * indicates that the bootagent or EFI code has
                         * improperly left this bit enabled
                         */
-                       hw_dbg(hw, "Please update your 82571 Bootagent\n");
+                       e_dbg("Please update your 82571 Bootagent\n");
                }
                ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
        }
@@ -483,7 +483,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
        }
 
        if (i == sw_timeout) {
-               hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+               e_dbg("Driver can't access device - SMBI bit is set.\n");
                hw->dev_spec.e82571.smb_counter++;
        }
        /* Get the FW semaphore. */
@@ -501,7 +501,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
        if (i == fw_timeout) {
                /* Release semaphores */
                e1000_put_hw_semaphore_82571(hw);
-               hw_dbg(hw, "Driver can't access the NVM\n");
+               e_dbg("Driver can't access the NVM\n");
                return -E1000_ERR_NVM;
        }
 
@@ -708,7 +708,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
         */
        if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
            (words == 0)) {
-               hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+               e_dbg("nvm parameter(s) out of bounds\n");
                return -E1000_ERR_NVM;
        }
 
@@ -749,7 +749,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
                timeout--;
        }
        if (!timeout) {
-               hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+               e_dbg("MNG configuration cycle has not completed.\n");
                return -E1000_ERR_RESET;
        }
 
@@ -848,9 +848,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
         */
        ret_val = e1000e_disable_pcie_master(hw);
        if (ret_val)
-               hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+               e_dbg("PCI-E Master disable polling has failed.\n");
 
-       hw_dbg(hw, "Masking off all interrupts\n");
+       e_dbg("Masking off all interrupts\n");
        ew32(IMC, 0xffffffff);
 
        ew32(RCTL, 0);
@@ -889,7 +889,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 
        ctrl = er32(CTRL);
 
-       hw_dbg(hw, "Issuing a global reset to MAC\n");
+       e_dbg("Issuing a global reset to MAC\n");
        ew32(CTRL, ctrl | E1000_CTRL_RST);
 
        if (hw->nvm.type == e1000_nvm_flash_hw) {
@@ -955,12 +955,12 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
        /* Initialize identification LED */
        ret_val = e1000e_id_led_init(hw);
        if (ret_val) {
-               hw_dbg(hw, "Error initializing identification LED\n");
+               e_dbg("Error initializing identification LED\n");
                return ret_val;
        }
 
        /* Disabling VLAN filtering */
-       hw_dbg(hw, "Initializing the IEEE VLAN\n");
+       e_dbg("Initializing the IEEE VLAN\n");
        e1000e_clear_vfta(hw);
 
        /* Setup the receive address. */
@@ -974,7 +974,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
        e1000e_init_rx_addrs(hw, rar_count);
 
        /* Zero out the Multicast HASH table */
-       hw_dbg(hw, "Zeroing the MTA\n");
+       e_dbg("Zeroing the MTA\n");
        for (i = 0; i < mac->mta_reg_count; i++)
                E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -1383,7 +1383,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
                                 */
                                mac->serdes_link_state =
                                    e1000_serdes_link_autoneg_progress;
-                               hw_dbg(hw, "AN_UP     -> AN_PROG\n");
+                               e_dbg("AN_UP     -> AN_PROG\n");
                        }
                break;
 
@@ -1401,7 +1401,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
                                    (ctrl & ~E1000_CTRL_SLU));
                                mac->serdes_link_state =
                                    e1000_serdes_link_autoneg_progress;
-                               hw_dbg(hw, "FORCED_UP -> AN_PROG\n");
+                               e_dbg("FORCED_UP -> AN_PROG\n");
                        }
                        break;
 
@@ -1415,7 +1415,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
                        if (status & E1000_STATUS_LU)  {
                                mac->serdes_link_state =
                                    e1000_serdes_link_autoneg_complete;
-                               hw_dbg(hw, "AN_PROG   -> AN_UP\n");
+                               e_dbg("AN_PROG   -> AN_UP\n");
                        } else {
                                /*
                                 * Disable autoneg, force link up and
@@ -1430,12 +1430,12 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
                                ret_val =
                                    e1000e_config_fc_after_link_up(hw);
                                if (ret_val) {
-                                       hw_dbg(hw, "Error config flow control\n");
+                                       e_dbg("Error config flow control\n");
                                        break;
                                }
                                mac->serdes_link_state =
                                    e1000_serdes_link_forced_up;
-                               hw_dbg(hw, "AN_PROG   -> FORCED_UP\n");
+                               e_dbg("AN_PROG   -> FORCED_UP\n");
                        }
                        mac->serdes_has_link = true;
                        break;
@@ -1450,14 +1450,14 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
                            (ctrl & ~E1000_CTRL_SLU));
                        mac->serdes_link_state =
                            e1000_serdes_link_autoneg_progress;
-                       hw_dbg(hw, "DOWN      -> AN_PROG\n");
+                       e_dbg("DOWN      -> AN_PROG\n");
                        break;
                }
        } else {
                if (!(rxcw & E1000_RXCW_SYNCH)) {
                        mac->serdes_has_link = false;
                        mac->serdes_link_state = e1000_serdes_link_down;
-                       hw_dbg(hw, "ANYSTATE  -> DOWN\n");
+                       e_dbg("ANYSTATE  -> DOWN\n");
                } else {
                        /*
                         * We have sync, and can tolerate one
@@ -1469,7 +1469,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
                        if (rxcw & E1000_RXCW_IV) {
                                mac->serdes_link_state = e1000_serdes_link_down;
                                mac->serdes_has_link = false;
-                               hw_dbg(hw, "ANYSTATE  -> DOWN\n");
+                               e_dbg("ANYSTATE  -> DOWN\n");
                        }
                }
        }
@@ -1491,7 +1491,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
 
        ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
        if (ret_val) {
-               hw_dbg(hw, "NVM Read Error\n");
+               e_dbg("NVM Read Error\n");
                return ret_val;
        }
 
index ac5d8552747b7f4c19371e59e497c15e0d1a3b2a..dac00a0238354531d2914bfa2a6c567062f51e3c 100644 (file)
@@ -48,9 +48,9 @@ struct e1000_info;
 
 #ifdef DEBUG
 #define e_dbg(format, arg...) \
-       e_printk(KERN_DEBUG , adapter, format, ## arg)
+       e_printk(KERN_DEBUG , hw->adapter, format, ## arg)
 #else
-#define e_dbg(format, arg...) do { (void)(adapter); } while (0)
+#define e_dbg(format, arg...) do { (void)(hw); } while (0)
 #endif
 
 #define e_err(format, arg...) \
index 6fd46f5f8a3cb049886c05a6d2012ed7e2cef38e..f5601c5ff7afd443683c3a48f0989169f480593f 100644 (file)
@@ -394,8 +394,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
        }
 
        if (i == timeout) {
-               hw_dbg(hw,
-                      "Driver can't access resource, SW_FW_SYNC timeout.\n");
+               e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
                return -E1000_ERR_SWFW_SYNC;
        }
 
@@ -597,7 +596,7 @@ static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw)
                timeout--;
        }
        if (!timeout) {
-               hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+               e_dbg("MNG configuration cycle has not completed.\n");
                return -E1000_ERR_RESET;
        }
 
@@ -630,7 +629,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
        if (ret_val)
                return ret_val;
 
-       hw_dbg(hw, "GG82563 PSCR: %X\n", phy_data);
+       e_dbg("GG82563 PSCR: %X\n", phy_data);
 
        ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
        if (ret_val)
@@ -648,7 +647,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
        udelay(1);
 
        if (hw->phy.autoneg_wait_to_complete) {
-               hw_dbg(hw, "Waiting for forced speed/duplex link "
+               e_dbg("Waiting for forced speed/duplex link "
                         "on GG82563 phy.\n");
 
                ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
@@ -771,9 +770,9 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
         */
        ret_val = e1000e_disable_pcie_master(hw);
        if (ret_val)
-               hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+               e_dbg("PCI-E Master disable polling has failed.\n");
 
-       hw_dbg(hw, "Masking off all interrupts\n");
+       e_dbg("Masking off all interrupts\n");
        ew32(IMC, 0xffffffff);
 
        ew32(RCTL, 0);
@@ -785,7 +784,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
        ctrl = er32(CTRL);
 
        ret_val = e1000_acquire_phy_80003es2lan(hw);
-       hw_dbg(hw, "Issuing a global reset to MAC\n");
+       e_dbg("Issuing a global reset to MAC\n");
        ew32(CTRL, ctrl | E1000_CTRL_RST);
        e1000_release_phy_80003es2lan(hw);
 
@@ -820,19 +819,19 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
        /* Initialize identification LED */
        ret_val = e1000e_id_led_init(hw);
        if (ret_val) {
-               hw_dbg(hw, "Error initializing identification LED\n");
+               e_dbg("Error initializing identification LED\n");
                return ret_val;
        }
 
        /* Disabling VLAN filtering */
-       hw_dbg(hw, "Initializing the IEEE VLAN\n");
+       e_dbg("Initializing the IEEE VLAN\n");
        e1000e_clear_vfta(hw);
 
        /* Setup the receive address. */
        e1000e_init_rx_addrs(hw, mac->rar_entry_count);
 
        /* Zero out the Multicast HASH table */
-       hw_dbg(hw, "Zeroing the MTA\n");
+       e_dbg("Zeroing the MTA\n");
        for (i = 0; i < mac->mta_reg_count; i++)
                E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -989,7 +988,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
        /* SW Reset the PHY so all changes take effect */
        ret_val = e1000e_commit_phy(hw);
        if (ret_val) {
-               hw_dbg(hw, "Error Resetting the PHY\n");
+               e_dbg("Error Resetting the PHY\n");
                return ret_val;
        }
 
index aaea41ef794dc1ee1fe23d124a4192b058e146e5..44808b053fccbc199e35d60dd5d166ba4a5b6f04 100644 (file)
@@ -925,15 +925,4 @@ struct e1000_hw {
        } dev_spec;
 };
 
-#ifdef DEBUG
-#define hw_dbg(hw, format, arg...) \
-       printk(KERN_DEBUG "%s: " format, e1000e_get_hw_dev_name(hw), ##arg)
-#else
-static inline int __attribute__ ((format (printf, 2, 3)))
-hw_dbg(struct e1000_hw *hw, const char *format, ...)
-{
-       return 0;
-}
-#endif
-
 #endif
index bef5e3333f2a6f5af33fad023f7dcfcc5c1997fd..101a2714467ea1ebd1943fc197253f6bcaecdbfa 100644 (file)
@@ -368,7 +368,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
 
        /* Can't read flash registers if the register set isn't mapped. */
        if (!hw->flash_address) {
-               hw_dbg(hw, "ERROR: Flash registers not mapped\n");
+               e_dbg("ERROR: Flash registers not mapped\n");
                return -E1000_ERR_CONFIG;
        }
 
@@ -550,7 +550,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
         */
        ret_val = e1000e_config_fc_after_link_up(hw);
        if (ret_val)
-               hw_dbg(hw, "Error configuring flow control\n");
+               e_dbg("Error configuring flow control\n");
 
 out:
        return ret_val;
@@ -644,7 +644,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
        }
 
        if (!timeout) {
-               hw_dbg(hw, "SW/FW/HW has locked the resource for too long.\n");
+               e_dbg("SW/FW/HW has locked the resource for too long.\n");
                ret_val = -E1000_ERR_CONFIG;
                goto out;
        }
@@ -664,7 +664,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
        }
 
        if (!timeout) {
-               hw_dbg(hw, "Failed to acquire the semaphore.\n");
+               e_dbg("Failed to acquire the semaphore.\n");
                extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
                ew32(EXTCNF_CTRL, extcnf_ctrl);
                ret_val = -E1000_ERR_CONFIG;
@@ -773,12 +773,12 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
        if (ret_val)
                return ret_val;
 
-       hw_dbg(hw, "IFE PMC: %X\n", data);
+       e_dbg("IFE PMC: %X\n", data);
 
        udelay(1);
 
        if (phy->autoneg_wait_to_complete) {
-               hw_dbg(hw, "Waiting for forced speed/duplex link on IFE phy.\n");
+               e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
 
                ret_val = e1000e_phy_has_link_generic(hw,
                                                     PHY_FORCE_LIMIT,
@@ -788,7 +788,7 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
                        return ret_val;
 
                if (!link)
-                       hw_dbg(hw, "Link taking longer than expected.\n");
+                       e_dbg("Link taking longer than expected.\n");
 
                /* Try once more */
                ret_val = e1000e_phy_has_link_generic(hw,
@@ -1203,7 +1203,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
         * leave the PHY in a bad state possibly resulting in no link.
         */
        if (loop == 0)
-               hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
+               e_dbg("LAN_INIT_DONE not set, increase timeout\n");
 
        /* Clear the Init Done bit for the next init event */
        data = er32(STATUS);
@@ -1274,7 +1274,7 @@ static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw)
                return ret_val;
 
        if (!link) {
-               hw_dbg(hw, "Phy info is only valid if link is up\n");
+               e_dbg("Phy info is only valid if link is up\n");
                return -E1000_ERR_CONFIG;
        }
 
@@ -1604,7 +1604,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
 
                        return 0;
                }
-               hw_dbg(hw, "Unable to determine valid NVM bank via EEC - "
+               e_dbg("Unable to determine valid NVM bank via EEC - "
                       "reading flash signature\n");
                /* fall-thru */
        default:
@@ -1634,7 +1634,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
                        return 0;
                }
 
-               hw_dbg(hw, "ERROR: No valid NVM bank present\n");
+               e_dbg("ERROR: No valid NVM bank present\n");
                return -E1000_ERR_NVM;
        }
 
@@ -1662,7 +1662,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 
        if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
            (words == 0)) {
-               hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+               e_dbg("nvm parameter(s) out of bounds\n");
                ret_val = -E1000_ERR_NVM;
                goto out;
        }
@@ -1671,7 +1671,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 
        ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
        if (ret_val) {
-               hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+               e_dbg("Could not detect valid bank, assuming bank 0\n");
                bank = 0;
        }
 
@@ -1697,7 +1697,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 
 out:
        if (ret_val)
-               hw_dbg(hw, "NVM read error: %d\n", ret_val);
+               e_dbg("NVM read error: %d\n", ret_val);
 
        return ret_val;
 }
@@ -1719,7 +1719,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
 
        /* Check if the flash descriptor is valid */
        if (hsfsts.hsf_status.fldesvalid == 0) {
-               hw_dbg(hw, "Flash descriptor invalid.  "
+               e_dbg("Flash descriptor invalid.  "
                         "SW Sequencing must be used.");
                return -E1000_ERR_NVM;
        }
@@ -1769,7 +1769,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
                        hsfsts.hsf_status.flcdone = 1;
                        ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
                } else {
-                       hw_dbg(hw, "Flash controller busy, cannot get access");
+                       e_dbg("Flash controller busy, cannot get access");
                }
        }
 
@@ -1919,7 +1919,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
                                /* Repeat for some time before giving up. */
                                continue;
                        } else if (hsfsts.hsf_status.flcdone == 0) {
-                               hw_dbg(hw, "Timeout error - flash cycle "
+                               e_dbg("Timeout error - flash cycle "
                                         "did not complete.");
                                break;
                        }
@@ -1947,7 +1947,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 
        if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
            (words == 0)) {
-               hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+               e_dbg("nvm parameter(s) out of bounds\n");
                return -E1000_ERR_NVM;
        }
 
@@ -1998,7 +1998,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
         */
        ret_val =  e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
        if (ret_val) {
-               hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+               e_dbg("Could not detect valid bank, assuming bank 0\n");
                bank = 0;
        }
 
@@ -2072,7 +2072,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
         */
        if (ret_val) {
                /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
-               hw_dbg(hw, "Flash commit failed.\n");
+               e_dbg("Flash commit failed.\n");
                nvm->ops.release_nvm(hw);
                goto out;
        }
@@ -2128,7 +2128,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 
 out:
        if (ret_val)
-               hw_dbg(hw, "NVM update error: %d\n", ret_val);
+               e_dbg("NVM update error: %d\n", ret_val);
 
        return ret_val;
 }
@@ -2278,7 +2278,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
                        /* Repeat for some time before giving up. */
                        continue;
                if (hsfsts.hsf_status.flcdone == 0) {
-                       hw_dbg(hw, "Timeout error - flash cycle "
+                       e_dbg("Timeout error - flash cycle "
                                 "did not complete.");
                        break;
                }
@@ -2323,7 +2323,7 @@ static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
                return ret_val;
 
        for (program_retries = 0; program_retries < 100; program_retries++) {
-               hw_dbg(hw, "Retrying Byte %2.2X at offset %u\n", byte, offset);
+               e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
                udelay(100);
                ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
                if (!ret_val)
@@ -2458,7 +2458,7 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
 
        ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
        if (ret_val) {
-               hw_dbg(hw, "NVM Read Error\n");
+               e_dbg("NVM Read Error\n");
                return ret_val;
        }
 
@@ -2588,10 +2588,10 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
         */
        ret_val = e1000e_disable_pcie_master(hw);
        if (ret_val) {
-               hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+               e_dbg("PCI-E Master disable polling has failed.\n");
        }
 
-       hw_dbg(hw, "Masking off all interrupts\n");
+       e_dbg("Masking off all interrupts\n");
        ew32(IMC, 0xffffffff);
 
        /*
@@ -2643,7 +2643,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
        }
        ret_val = e1000_acquire_swflag_ich8lan(hw);
        /* Whether or not the swflag was acquired, we need to reset the part */
-       hw_dbg(hw, "Issuing a global reset to ich8lan\n");
+       e_dbg("Issuing a global reset to ich8lan\n");
        ew32(CTRL, (ctrl | E1000_CTRL_RST));
        msleep(20);
 
@@ -2663,7 +2663,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
                         * return with an error. This can happen in situations
                         * where there is no eeprom and prevents getting link.
                         */
-                       hw_dbg(hw, "Auto Read Done did not complete\n");
+                       e_dbg("Auto Read Done did not complete\n");
                }
        }
        /* Dummy read to clear the phy wakeup bit after lcd reset */
@@ -2725,7 +2725,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
        /* Initialize identification LED */
        ret_val = mac->ops.id_led_init(hw);
        if (ret_val) {
-               hw_dbg(hw, "Error initializing identification LED\n");
+               e_dbg("Error initializing identification LED\n");
                return ret_val;
        }
 
@@ -2733,7 +2733,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
        e1000e_init_rx_addrs(hw, mac->rar_entry_count);
 
        /* Zero out the Multicast HASH table */
-       hw_dbg(hw, "Zeroing the MTA\n");
+       e_dbg("Zeroing the MTA\n");
        for (i = 0; i < mac->mta_reg_count; i++)
                E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -2879,7 +2879,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
         */
        hw->fc.current_mode = hw->fc.requested_mode;
 
-       hw_dbg(hw, "After fix-ups FlowControl is now = %x\n",
+       e_dbg("After fix-ups FlowControl is now = %x\n",
                hw->fc.current_mode);
 
        /* Continue to configure the copper link. */
@@ -3094,7 +3094,7 @@ void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
 
        if (hw->mac.type != e1000_ich8lan) {
-               hw_dbg(hw, "Workaround applies to ICH8 only.\n");
+               e_dbg("Workaround applies to ICH8 only.\n");
                return;
        }
 
@@ -3372,8 +3372,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
                if (status & E1000_STATUS_PHYRA)
                        ew32(STATUS, status & ~E1000_STATUS_PHYRA);
                else
-                       hw_dbg(hw,
-                              "PHY Reset Asserted not set - needs delay\n");
+                       e_dbg("PHY Reset Asserted not set - needs delay\n");
        }
 
        e1000e_get_cfg_done(hw);
@@ -3388,7 +3387,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
        } else {
                if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
                        /* Maybe we should do a basic PHY config */
-                       hw_dbg(hw, "EEPROM not present\n");
+                       e_dbg("EEPROM not present\n");
                        return -E1000_ERR_CONFIG;
                }
        }
index 5a670a2230e796907c1e2837ff3342f5ac20d0bf..fa31c51e564265dd951bf1311c0cd221c3c21968 100644 (file)
@@ -110,12 +110,12 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
        u32 i;
 
        /* Setup the receive address */
-       hw_dbg(hw, "Programming MAC Address into RAR[0]\n");
+       e_dbg("Programming MAC Address into RAR[0]\n");
 
        e1000e_rar_set(hw, hw->mac.addr, 0);
 
        /* Zero out the other (rar_entry_count - 1) receive addresses */
-       hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1);
+       e_dbg("Clearing RAR[1-%u]\n", rar_count-1);
        for (i = 1; i < rar_count; i++) {
                E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0);
                e1e_flush();
@@ -271,7 +271,7 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
        for (; mc_addr_count > 0; mc_addr_count--) {
                u32 hash_value, hash_reg, hash_bit, mta;
                hash_value = e1000_hash_mc_addr(hw, mc_addr_list);
-               hw_dbg(hw, "Hash value = 0x%03X\n", hash_value);
+               e_dbg("Hash value = 0x%03X\n", hash_value);
                hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
                hash_bit = hash_value & 0x1F;
                mta = (1 << hash_bit);
@@ -403,7 +403,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
         */
        ret_val = e1000e_config_fc_after_link_up(hw);
        if (ret_val) {
-               hw_dbg(hw, "Error configuring flow control\n");
+               e_dbg("Error configuring flow control\n");
        }
 
        return ret_val;
@@ -443,7 +443,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
                        mac->autoneg_failed = 1;
                        return 0;
                }
-               hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n");
+               e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
 
                /* Disable auto-negotiation in the TXCW register */
                ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
@@ -456,7 +456,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
                /* Configure Flow Control after forcing link up. */
                ret_val = e1000e_config_fc_after_link_up(hw);
                if (ret_val) {
-                       hw_dbg(hw, "Error configuring flow control\n");
+                       e_dbg("Error configuring flow control\n");
                        return ret_val;
                }
        } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
@@ -466,7 +466,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
                 * and disable forced link in the Device Control register
                 * in an attempt to auto-negotiate with our link partner.
                 */
-               hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n");
+               e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
                ew32(TXCW, mac->txcw);
                ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 
@@ -508,7 +508,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
                        mac->autoneg_failed = 1;
                        return 0;
                }
-               hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n");
+               e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
 
                /* Disable auto-negotiation in the TXCW register */
                ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
@@ -521,7 +521,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
                /* Configure Flow Control after forcing link up. */
                ret_val = e1000e_config_fc_after_link_up(hw);
                if (ret_val) {
-                       hw_dbg(hw, "Error configuring flow control\n");
+                       e_dbg("Error configuring flow control\n");
                        return ret_val;
                }
        } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
@@ -531,7 +531,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
                 * and disable forced link in the Device Control register
                 * in an attempt to auto-negotiate with our link partner.
                 */
-               hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n");
+               e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
                ew32(TXCW, mac->txcw);
                ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 
@@ -548,11 +548,11 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
                if (rxcw & E1000_RXCW_SYNCH) {
                        if (!(rxcw & E1000_RXCW_IV)) {
                                mac->serdes_has_link = true;
-                               hw_dbg(hw, "SERDES: Link up - forced.\n");
+                               e_dbg("SERDES: Link up - forced.\n");
                        }
                } else {
                        mac->serdes_has_link = false;
-                       hw_dbg(hw, "SERDES: Link down - force failed.\n");
+                       e_dbg("SERDES: Link down - force failed.\n");
                }
        }
 
@@ -565,20 +565,20 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
                        if (rxcw & E1000_RXCW_SYNCH) {
                                if (!(rxcw & E1000_RXCW_IV)) {
                                        mac->serdes_has_link = true;
-                                       hw_dbg(hw, "SERDES: Link up - autoneg "
+                                       e_dbg("SERDES: Link up - autoneg "
                                           "completed sucessfully.\n");
                                } else {
                                        mac->serdes_has_link = false;
-                                       hw_dbg(hw, "SERDES: Link down - invalid"
+                                       e_dbg("SERDES: Link down - invalid"
                                           "codewords detected in autoneg.\n");
                                }
                        } else {
                                mac->serdes_has_link = false;
-                               hw_dbg(hw, "SERDES: Link down - no sync.\n");
+                               e_dbg("SERDES: Link down - no sync.\n");
                        }
                } else {
                        mac->serdes_has_link = false;
-                       hw_dbg(hw, "SERDES: Link down - autoneg failed\n");
+                       e_dbg("SERDES: Link down - autoneg failed\n");
                }
        }
 
@@ -609,7 +609,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
        ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
 
        if (ret_val) {
-               hw_dbg(hw, "NVM Read Error\n");
+               e_dbg("NVM Read Error\n");
                return ret_val;
        }
 
@@ -662,7 +662,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
         */
        hw->fc.current_mode = hw->fc.requested_mode;
 
-       hw_dbg(hw, "After fix-ups FlowControl is now = %x\n",
+       e_dbg("After fix-ups FlowControl is now = %x\n",
                hw->fc.current_mode);
 
        /* Call the necessary media_type subroutine to configure the link. */
@@ -676,7 +676,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
         * control is disabled, because it does not hurt anything to
         * initialize these registers.
         */
-       hw_dbg(hw, "Initializing the Flow Control address, type and timer regs\n");
+       e_dbg("Initializing the Flow Control address, type and timer regs\n");
        ew32(FCT, FLOW_CONTROL_TYPE);
        ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
        ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
@@ -746,7 +746,7 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
                txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
                break;
        default:
-               hw_dbg(hw, "Flow control param set incorrectly\n");
+               e_dbg("Flow control param set incorrectly\n");
                return -E1000_ERR_CONFIG;
                break;
        }
@@ -784,7 +784,7 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
                        break;
        }
        if (i == FIBER_LINK_UP_LIMIT) {
-               hw_dbg(hw, "Never got a valid link from auto-neg!!!\n");
+               e_dbg("Never got a valid link from auto-neg!!!\n");
                mac->autoneg_failed = 1;
                /*
                 * AutoNeg failed to achieve a link, so we'll call
@@ -794,13 +794,13 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
                 */
                ret_val = mac->ops.check_for_link(hw);
                if (ret_val) {
-                       hw_dbg(hw, "Error while checking for link\n");
+                       e_dbg("Error while checking for link\n");
                        return ret_val;
                }
                mac->autoneg_failed = 0;
        } else {
                mac->autoneg_failed = 0;
-               hw_dbg(hw, "Valid Link Found\n");
+               e_dbg("Valid Link Found\n");
        }
 
        return 0;
@@ -836,7 +836,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
         * then the link-up status bit will be set and the flow control enable
         * bits (RFCE and TFCE) will be set according to their negotiated value.
         */
-       hw_dbg(hw, "Auto-negotiation enabled\n");
+       e_dbg("Auto-negotiation enabled\n");
 
        ew32(CTRL, ctrl);
        e1e_flush();
@@ -851,7 +851,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
            (er32(CTRL) & E1000_CTRL_SWDPIN1)) {
                ret_val = e1000_poll_fiber_serdes_link_generic(hw);
        } else {
-               hw_dbg(hw, "No signal detected\n");
+               e_dbg("No signal detected\n");
        }
 
        return 0;
@@ -947,7 +947,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw)
         *      3:  Both Rx and Tx flow control (symmetric) is enabled.
         *  other:  No other values should be possible at this point.
         */
-       hw_dbg(hw, "hw->fc.current_mode = %u\n", hw->fc.current_mode);
+       e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
 
        switch (hw->fc.current_mode) {
        case e1000_fc_none:
@@ -965,7 +965,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw)
                ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
                break;
        default:
-               hw_dbg(hw, "Flow control param set incorrectly\n");
+               e_dbg("Flow control param set incorrectly\n");
                return -E1000_ERR_CONFIG;
        }
 
@@ -1006,7 +1006,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
        }
 
        if (ret_val) {
-               hw_dbg(hw, "Error forcing flow control settings\n");
+               e_dbg("Error forcing flow control settings\n");
                return ret_val;
        }
 
@@ -1030,7 +1030,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                        return ret_val;
 
                if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
-                       hw_dbg(hw, "Copper PHY and Auto Neg "
+                       e_dbg("Copper PHY and Auto Neg "
                                 "has not completed.\n");
                        return ret_val;
                }
@@ -1095,10 +1095,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                         */
                        if (hw->fc.requested_mode == e1000_fc_full) {
                                hw->fc.current_mode = e1000_fc_full;
-                               hw_dbg(hw, "Flow Control = FULL.\r\n");
+                               e_dbg("Flow Control = FULL.\r\n");
                        } else {
                                hw->fc.current_mode = e1000_fc_rx_pause;
-                               hw_dbg(hw, "Flow Control = "
+                               e_dbg("Flow Control = "
                                         "RX PAUSE frames only.\r\n");
                        }
                }
@@ -1116,7 +1116,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                          (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
                          (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
                        hw->fc.current_mode = e1000_fc_tx_pause;
-                       hw_dbg(hw, "Flow Control = Tx PAUSE frames only.\r\n");
+                       e_dbg("Flow Control = Tx PAUSE frames only.\r\n");
                }
                /*
                 * For transmitting PAUSE frames ONLY.
@@ -1132,14 +1132,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                         !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
                         (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
                        hw->fc.current_mode = e1000_fc_rx_pause;
-                       hw_dbg(hw, "Flow Control = Rx PAUSE frames only.\r\n");
+                       e_dbg("Flow Control = Rx PAUSE frames only.\r\n");
                } else {
                        /*
                         * Per the IEEE spec, at this point flow control
                         * should be disabled.
                         */
                        hw->fc.current_mode = e1000_fc_none;
-                       hw_dbg(hw, "Flow Control = NONE.\r\n");
+                       e_dbg("Flow Control = NONE.\r\n");
                }
 
                /*
@@ -1149,7 +1149,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                 */
                ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
                if (ret_val) {
-                       hw_dbg(hw, "Error getting link speed and duplex\n");
+                       e_dbg("Error getting link speed and duplex\n");
                        return ret_val;
                }
 
@@ -1162,7 +1162,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                 */
                ret_val = e1000e_force_mac_fc(hw);
                if (ret_val) {
-                       hw_dbg(hw, "Error forcing flow control settings\n");
+                       e_dbg("Error forcing flow control settings\n");
                        return ret_val;
                }
        }
@@ -1186,21 +1186,21 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup
        status = er32(STATUS);
        if (status & E1000_STATUS_SPEED_1000) {
                *speed = SPEED_1000;
-               hw_dbg(hw, "1000 Mbs, ");
+               e_dbg("1000 Mbs, ");
        } else if (status & E1000_STATUS_SPEED_100) {
                *speed = SPEED_100;
-               hw_dbg(hw, "100 Mbs, ");
+               e_dbg("100 Mbs, ");
        } else {
                *speed = SPEED_10;
-               hw_dbg(hw, "10 Mbs, ");
+               e_dbg("10 Mbs, ");
        }
 
        if (status & E1000_STATUS_FD) {
                *duplex = FULL_DUPLEX;
-               hw_dbg(hw, "Full Duplex\n");
+               e_dbg("Full Duplex\n");
        } else {
                *duplex = HALF_DUPLEX;
-               hw_dbg(hw, "Half Duplex\n");
+               e_dbg("Half Duplex\n");
        }
 
        return 0;
@@ -1246,7 +1246,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
        }
 
        if (i == timeout) {
-               hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+               e_dbg("Driver can't access device - SMBI bit is set.\n");
                return -E1000_ERR_NVM;
        }
 
@@ -1265,7 +1265,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
        if (i == timeout) {
                /* Release semaphores */
                e1000e_put_hw_semaphore(hw);
-               hw_dbg(hw, "Driver can't access the NVM\n");
+               e_dbg("Driver can't access the NVM\n");
                return -E1000_ERR_NVM;
        }
 
@@ -1305,7 +1305,7 @@ s32 e1000e_get_auto_rd_done(struct e1000_hw *hw)
        }
 
        if (i == AUTO_READ_DONE_TIMEOUT) {
-               hw_dbg(hw, "Auto read by HW from NVM has not completed.\n");
+               e_dbg("Auto read by HW from NVM has not completed.\n");
                return -E1000_ERR_RESET;
        }
 
@@ -1326,7 +1326,7 @@ s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data)
 
        ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
        if (ret_val) {
-               hw_dbg(hw, "NVM Read Error\n");
+               e_dbg("NVM Read Error\n");
                return ret_val;
        }
 
@@ -1580,7 +1580,7 @@ s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
        }
 
        if (!timeout) {
-               hw_dbg(hw, "Master requests are pending.\n");
+               e_dbg("Master requests are pending.\n");
                return -E1000_ERR_MASTER_REQUESTS_PENDING;
        }
 
@@ -1804,7 +1804,7 @@ s32 e1000e_acquire_nvm(struct e1000_hw *hw)
        if (!timeout) {
                eecd &= ~E1000_EECD_REQ;
                ew32(EECD, eecd);
-               hw_dbg(hw, "Could not acquire NVM grant\n");
+               e_dbg("Could not acquire NVM grant\n");
                return -E1000_ERR_NVM;
        }
 
@@ -1909,7 +1909,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
                }
 
                if (!timeout) {
-                       hw_dbg(hw, "SPI NVM Status error\n");
+                       e_dbg("SPI NVM Status error\n");
                        return -E1000_ERR_NVM;
                }
        }
@@ -1938,7 +1938,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
         */
        if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
            (words == 0)) {
-               hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+               e_dbg("nvm parameter(s) out of bounds\n");
                return -E1000_ERR_NVM;
        }
 
@@ -1981,7 +1981,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
         */
        if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
            (words == 0)) {
-               hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+               e_dbg("nvm parameter(s) out of bounds\n");
                return -E1000_ERR_NVM;
        }
 
@@ -2061,7 +2061,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
                ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
                                         &mac_addr_offset);
                if (ret_val) {
-                       hw_dbg(hw, "NVM Read Error\n");
+                       e_dbg("NVM Read Error\n");
                        return ret_val;
                }
                if (mac_addr_offset == 0xFFFF)
@@ -2076,7 +2076,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
                        ret_val = e1000_read_nvm(hw, mac_addr_offset, 1,
                                                 &nvm_data);
                        if (ret_val) {
-                               hw_dbg(hw, "NVM Read Error\n");
+                               e_dbg("NVM Read Error\n");
                                return ret_val;
                        }
                        if (nvm_data & 0x0001)
@@ -2091,7 +2091,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
                offset = mac_addr_offset + (i >> 1);
                ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
                if (ret_val) {
-                       hw_dbg(hw, "NVM Read Error\n");
+                       e_dbg("NVM Read Error\n");
                        return ret_val;
                }
                hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF);
@@ -2124,14 +2124,14 @@ s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw)
        for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
                ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
                if (ret_val) {
-                       hw_dbg(hw, "NVM Read Error\n");
+                       e_dbg("NVM Read Error\n");
                        return ret_val;
                }
                checksum += nvm_data;
        }
 
        if (checksum != (u16) NVM_SUM) {
-               hw_dbg(hw, "NVM Checksum Invalid\n");
+               e_dbg("NVM Checksum Invalid\n");
                return -E1000_ERR_NVM;
        }
 
@@ -2155,7 +2155,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
        for (i = 0; i < NVM_CHECKSUM_REG; i++) {
                ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
                if (ret_val) {
-                       hw_dbg(hw, "NVM Read Error while updating checksum.\n");
+                       e_dbg("NVM Read Error while updating checksum.\n");
                        return ret_val;
                }
                checksum += nvm_data;
@@ -2163,7 +2163,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
        checksum = (u16) NVM_SUM - checksum;
        ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
        if (ret_val)
-               hw_dbg(hw, "NVM Write Error while updating checksum.\n");
+               e_dbg("NVM Write Error while updating checksum.\n");
 
        return ret_val;
 }
@@ -2226,7 +2226,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
        /* Check that the host interface is enabled. */
        hicr = er32(HICR);
        if ((hicr & E1000_HICR_EN) == 0) {
-               hw_dbg(hw, "E1000_HOST_EN bit disabled.\n");
+               e_dbg("E1000_HOST_EN bit disabled.\n");
                return -E1000_ERR_HOST_INTERFACE_COMMAND;
        }
        /* check the previous command is completed */
@@ -2238,7 +2238,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
        }
 
        if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
-               hw_dbg(hw, "Previous command timeout failed .\n");
+               e_dbg("Previous command timeout failed .\n");
                return -E1000_ERR_HOST_INTERFACE_COMMAND;
        }
 
@@ -2509,14 +2509,14 @@ s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num)
 
        ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
        if (ret_val) {
-               hw_dbg(hw, "NVM Read Error\n");
+               e_dbg("NVM Read Error\n");
                return ret_val;
        }
        *pba_num = (u32)(nvm_data << 16);
 
        ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
        if (ret_val) {
-               hw_dbg(hw, "NVM Read Error\n");
+               e_dbg("NVM Read Error\n");
                return ret_val;
        }
        *pba_num |= nvm_data;
index ff9f9f1725e3e4aff73b1450e001c2377ba50706..0b5352307f16d82ab0f0a297ff16a37d40d1d059 100644 (file)
@@ -65,17 +65,6 @@ static const struct e1000_info *e1000_info_tbl[] = {
        [board_pchlan]          = &e1000_pch_info,
 };
 
-#ifdef DEBUG
-/**
- * e1000_get_hw_dev_name - return device name string
- * used by hardware layer to print debugging information
- **/
-char *e1000e_get_hw_dev_name(struct e1000_hw *hw)
-{
-       return hw->adapter->netdev->name;
-}
-#endif
-
 /**
  * e1000_desc_unused - calculate if we have unused descriptors
  **/
@@ -415,6 +404,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 {
        struct net_device *netdev = adapter->netdev;
        struct pci_dev *pdev = adapter->pdev;
+       struct e1000_hw *hw = &adapter->hw;
        struct e1000_ring *rx_ring = adapter->rx_ring;
        struct e1000_rx_desc *rx_desc, *next_rxd;
        struct e1000_buffer *buffer_info, *next_buffer;
@@ -464,8 +454,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
                 * packet, also make sure the frame isn't just CRC only */
                if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
                        /* All receives must fit into a single buffer */
-                       e_dbg("%s: Receive packet consumed multiple buffers\n",
-                             netdev->name);
+                       e_dbg("Receive packet consumed multiple buffers\n");
                        /* recycle */
                        buffer_info->skb = skb;
                        goto next_desc;
@@ -682,6 +671,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
                                  int *work_done, int work_to_do)
 {
+       struct e1000_hw *hw = &adapter->hw;
        union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
        struct net_device *netdev = adapter->netdev;
        struct pci_dev *pdev = adapter->pdev;
@@ -725,8 +715,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
                buffer_info->dma = 0;
 
                if (!(staterr & E1000_RXD_STAT_EOP)) {
-                       e_dbg("%s: Packet Split buffers didn't pick up the "
-                             "full packet\n", netdev->name);
+                       e_dbg("Packet Split buffers didn't pick up the full "
+                             "packet\n");
                        dev_kfree_skb_irq(skb);
                        goto next_desc;
                }
@@ -739,8 +729,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
                length = le16_to_cpu(rx_desc->wb.middle.length0);
 
                if (!length) {
-                       e_dbg("%s: Last part of the packet spanning multiple "
-                             "descriptors\n", netdev->name);
+                       e_dbg("Last part of the packet spanning multiple "
+                             "descriptors\n");
                        dev_kfree_skb_irq(skb);
                        goto next_desc;
                }
@@ -2931,7 +2921,7 @@ static irqreturn_t e1000_intr_msi_test(int irq, void *data)
        struct e1000_hw *hw = &adapter->hw;
        u32 icr = er32(ICR);
 
-       e_dbg("%s: icr is %08X\n", netdev->name, icr);
+       e_dbg("icr is %08X\n", icr);
        if (icr & E1000_ICR_RXSEQ) {
                adapter->flags &= ~FLAG_MSI_TEST_FAILED;
                wmb();
@@ -3001,7 +2991,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
                goto msi_test_failed;
 
        /* okay so the test worked, restore settings */
-       e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name);
+       e_dbg("MSI interrupt test succeeded!\n");
 msi_test_failed:
        e1000e_set_interrupt_capability(adapter);
        e1000_request_irq(adapter);
index 95a8196cf44ca529cc03a9b5e0ad732344fc788e..cff1df20403131b05a8b03929a514b80f2b6b7a9 100644 (file)
@@ -212,7 +212,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
        u32 i, mdic = 0;
 
        if (offset > MAX_PHY_REG_ADDRESS) {
-               hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+               e_dbg("PHY Address %d is out of range\n", offset);
                return -E1000_ERR_PARAM;
        }
 
@@ -239,11 +239,11 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
                        break;
        }
        if (!(mdic & E1000_MDIC_READY)) {
-               hw_dbg(hw, "MDI Read did not complete\n");
+               e_dbg("MDI Read did not complete\n");
                return -E1000_ERR_PHY;
        }
        if (mdic & E1000_MDIC_ERROR) {
-               hw_dbg(hw, "MDI Error\n");
+               e_dbg("MDI Error\n");
                return -E1000_ERR_PHY;
        }
        *data = (u16) mdic;
@@ -265,7 +265,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
        u32 i, mdic = 0;
 
        if (offset > MAX_PHY_REG_ADDRESS) {
-               hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+               e_dbg("PHY Address %d is out of range\n", offset);
                return -E1000_ERR_PARAM;
        }
 
@@ -293,11 +293,11 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
                        break;
        }
        if (!(mdic & E1000_MDIC_READY)) {
-               hw_dbg(hw, "MDI Write did not complete\n");
+               e_dbg("MDI Write did not complete\n");
                return -E1000_ERR_PHY;
        }
        if (mdic & E1000_MDIC_ERROR) {
-               hw_dbg(hw, "MDI Error\n");
+               e_dbg("MDI Error\n");
                return -E1000_ERR_PHY;
        }
 
@@ -786,7 +786,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
        /* Commit the changes. */
        ret_val = e1000e_commit_phy(hw);
        if (ret_val) {
-               hw_dbg(hw, "Error committing the PHY changes\n");
+               e_dbg("Error committing the PHY changes\n");
                return ret_val;
        }
 
@@ -823,7 +823,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
 
        ret_val = e1000_phy_hw_reset(hw);
        if (ret_val) {
-               hw_dbg(hw, "Error resetting the PHY.\n");
+               e_dbg("Error resetting the PHY.\n");
                return ret_val;
        }
 
@@ -836,7 +836,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
        /* disable lplu d0 during driver init */
        ret_val = e1000_set_d0_lplu_state(hw, 0);
        if (ret_val) {
-               hw_dbg(hw, "Error Disabling LPLU D0\n");
+               e_dbg("Error Disabling LPLU D0\n");
                return ret_val;
        }
        /* Configure mdi-mdix settings */
@@ -972,39 +972,39 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
                                 NWAY_AR_10T_HD_CAPS);
        mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
 
-       hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised);
+       e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
 
        /* Do we want to advertise 10 Mb Half Duplex? */
        if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
-               hw_dbg(hw, "Advertise 10mb Half duplex\n");
+               e_dbg("Advertise 10mb Half duplex\n");
                mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
        }
 
        /* Do we want to advertise 10 Mb Full Duplex? */
        if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
-               hw_dbg(hw, "Advertise 10mb Full duplex\n");
+               e_dbg("Advertise 10mb Full duplex\n");
                mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
        }
 
        /* Do we want to advertise 100 Mb Half Duplex? */
        if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
-               hw_dbg(hw, "Advertise 100mb Half duplex\n");
+               e_dbg("Advertise 100mb Half duplex\n");
                mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
        }
 
        /* Do we want to advertise 100 Mb Full Duplex? */
        if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
-               hw_dbg(hw, "Advertise 100mb Full duplex\n");
+               e_dbg("Advertise 100mb Full duplex\n");
                mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
        }
 
        /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
        if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
-               hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n");
+               e_dbg("Advertise 1000mb Half duplex request denied!\n");
 
        /* Do we want to advertise 1000 Mb Full Duplex? */
        if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
-               hw_dbg(hw, "Advertise 1000mb Full duplex\n");
+               e_dbg("Advertise 1000mb Full duplex\n");
                mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
        }
 
@@ -1063,7 +1063,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
                mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
                break;
        default:
-               hw_dbg(hw, "Flow control param set incorrectly\n");
+               e_dbg("Flow control param set incorrectly\n");
                ret_val = -E1000_ERR_CONFIG;
                return ret_val;
        }
@@ -1072,7 +1072,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
        if (ret_val)
                return ret_val;
 
-       hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+       e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
 
        if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
                ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
@@ -1109,13 +1109,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
        if (phy->autoneg_advertised == 0)
                phy->autoneg_advertised = phy->autoneg_mask;
 
-       hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n");
+       e_dbg("Reconfiguring auto-neg advertisement params\n");
        ret_val = e1000_phy_setup_autoneg(hw);
        if (ret_val) {
-               hw_dbg(hw, "Error Setting up Auto-Negotiation\n");
+               e_dbg("Error Setting up Auto-Negotiation\n");
                return ret_val;
        }
-       hw_dbg(hw, "Restarting Auto-Neg\n");
+       e_dbg("Restarting Auto-Neg\n");
 
        /*
         * Restart auto-negotiation by setting the Auto Neg Enable bit and
@@ -1137,7 +1137,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
        if (phy->autoneg_wait_to_complete) {
                ret_val = e1000_wait_autoneg(hw);
                if (ret_val) {
-                       hw_dbg(hw, "Error while waiting for "
+                       e_dbg("Error while waiting for "
                                 "autoneg to complete\n");
                        return ret_val;
                }
@@ -1175,10 +1175,10 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
                 * PHY will be set to 10H, 10F, 100H or 100F
                 * depending on user settings.
                 */
-               hw_dbg(hw, "Forcing Speed and Duplex\n");
+               e_dbg("Forcing Speed and Duplex\n");
                ret_val = e1000_phy_force_speed_duplex(hw);
                if (ret_val) {
-                       hw_dbg(hw, "Error Forcing Speed and Duplex\n");
+                       e_dbg("Error Forcing Speed and Duplex\n");
                        return ret_val;
                }
        }
@@ -1195,11 +1195,11 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
                return ret_val;
 
        if (link) {
-               hw_dbg(hw, "Valid link established!!!\n");
+               e_dbg("Valid link established!!!\n");
                e1000e_config_collision_dist(hw);
                ret_val = e1000e_config_fc_after_link_up(hw);
        } else {
-               hw_dbg(hw, "Unable to establish link!!!\n");
+               e_dbg("Unable to establish link!!!\n");
        }
 
        return ret_val;
@@ -1245,12 +1245,12 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
        if (ret_val)
                return ret_val;
 
-       hw_dbg(hw, "IGP PSCR: %X\n", phy_data);
+       e_dbg("IGP PSCR: %X\n", phy_data);
 
        udelay(1);
 
        if (phy->autoneg_wait_to_complete) {
-               hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n");
+               e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
 
                ret_val = e1000e_phy_has_link_generic(hw,
                                                     PHY_FORCE_LIMIT,
@@ -1260,7 +1260,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
                        return ret_val;
 
                if (!link)
-                       hw_dbg(hw, "Link taking longer than expected.\n");
+                       e_dbg("Link taking longer than expected.\n");
 
                /* Try once more */
                ret_val = e1000e_phy_has_link_generic(hw,
@@ -1304,7 +1304,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
        if (ret_val)
                return ret_val;
 
-       hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data);
+       e_dbg("M88E1000 PSCR: %X\n", phy_data);
 
        ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
        if (ret_val)
@@ -1322,7 +1322,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
                return ret_val;
 
        if (phy->autoneg_wait_to_complete) {
-               hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n");
+               e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
 
                ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
                                                     100000, &link);
@@ -1413,11 +1413,11 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
        if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
                ctrl &= ~E1000_CTRL_FD;
                *phy_ctrl &= ~MII_CR_FULL_DUPLEX;
-               hw_dbg(hw, "Half Duplex\n");
+               e_dbg("Half Duplex\n");
        } else {
                ctrl |= E1000_CTRL_FD;
                *phy_ctrl |= MII_CR_FULL_DUPLEX;
-               hw_dbg(hw, "Full Duplex\n");
+               e_dbg("Full Duplex\n");
        }
 
        /* Forcing 10mb or 100mb? */
@@ -1425,12 +1425,12 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
                ctrl |= E1000_CTRL_SPD_100;
                *phy_ctrl |= MII_CR_SPEED_100;
                *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
-               hw_dbg(hw, "Forcing 100mb\n");
+               e_dbg("Forcing 100mb\n");
        } else {
                ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
                *phy_ctrl |= MII_CR_SPEED_10;
                *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
-               hw_dbg(hw, "Forcing 10mb\n");
+               e_dbg("Forcing 10mb\n");
        }
 
        e1000e_config_collision_dist(hw);
@@ -1826,7 +1826,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
        bool link;
 
        if (hw->phy.media_type != e1000_media_type_copper) {
-               hw_dbg(hw, "Phy info is only valid for copper media\n");
+               e_dbg("Phy info is only valid for copper media\n");
                return -E1000_ERR_CONFIG;
        }
 
@@ -1835,7 +1835,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
                return ret_val;
 
        if (!link) {
-               hw_dbg(hw, "Phy info is only valid if link is up\n");
+               e_dbg("Phy info is only valid if link is up\n");
                return -E1000_ERR_CONFIG;
        }
 
@@ -1903,7 +1903,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
                return ret_val;
 
        if (!link) {
-               hw_dbg(hw, "Phy info is only valid if link is up\n");
+               e_dbg("Phy info is only valid if link is up\n");
                return -E1000_ERR_CONFIG;
        }
 
@@ -2031,7 +2031,7 @@ s32 e1000e_get_cfg_done(struct e1000_hw *hw)
  **/
 s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
 {
-       hw_dbg(hw, "Running IGP 3 PHY init script\n");
+       e_dbg("Running IGP 3 PHY init script\n");
 
        /* PHY init IGP 3 */
        /* Enable rise/fall, 10-mode work in class-A */
@@ -2474,7 +2474,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
        /* Gig must be disabled for MDIO accesses to page 800 */
        if ((hw->mac.type == e1000_pchlan) &&
           (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
-               hw_dbg(hw, "Attempting to access page 800 while gig enabled\n");
+               e_dbg("Attempting to access page 800 while gig enabled\n");
 
        /* All operations in this function are phy address 1 */
        hw->phy.addr = 1;
@@ -2884,7 +2884,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
        /* masking with 0x3F to remove the page from offset */
        ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
        if (ret_val) {
-               hw_dbg(hw, "Could not write PHY the HV address register\n");
+               e_dbg("Could not write PHY the HV address register\n");
                goto out;
        }
 
@@ -2895,7 +2895,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
                ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
 
        if (ret_val) {
-               hw_dbg(hw, "Could not read data value from HV data register\n");
+               e_dbg("Could not read data value from HV data register\n");
                goto out;
        }
 
@@ -3021,12 +3021,12 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
        if (ret_val)
                goto out;
 
-       hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data);
+       e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data);
 
        udelay(1);
 
        if (phy->autoneg_wait_to_complete) {
-               hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n");
+               e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
 
                ret_val = e1000e_phy_has_link_generic(hw,
                                                     PHY_FORCE_LIMIT,
@@ -3036,7 +3036,7 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
                        goto out;
 
                if (!link)
-                       hw_dbg(hw, "Link taking longer than expected.\n");
+                       e_dbg("Link taking longer than expected.\n");
 
                /* Try once more */
                ret_val = e1000e_phy_has_link_generic(hw,
@@ -3072,7 +3072,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
                goto out;
 
        if (!link) {
-               hw_dbg(hw, "Phy info is only valid if link is up\n");
+               e_dbg("Phy info is only valid if link is up\n");
                ret_val = -E1000_ERR_CONFIG;
                goto out;
        }