The boards may be autocalibrated using the comedi_calibrate
utility.
-Configuration options:
- [0] - PCI bus of device (optional)
- [1] - PCI slot of device (optional)
- If bus/slot is not specified, the first supported
- PCI device found will be used.
+Configuration options: not applicable, uses PCI auto config
For commands, the scanned channels must be consecutive
(i.e. 4-5-6-7, 2-3-4,...), and must all have the same
return IRQ_HANDLED;
}
-static struct pci_dev *cb_pcidas_find_pci_device(struct comedi_device *dev,
- struct comedi_devconfig *it)
+static const void *cb_pcidas_find_boardinfo(struct comedi_device *dev,
+ struct pci_dev *pcidev)
{
const struct cb_pcidas_board *thisboard;
- struct pci_dev *pcidev = NULL;
- int bus = it->options[0];
- int slot = it->options[1];
int i;
- for_each_pci_dev(pcidev) {
- /* is it not a computer boards card? */
- if (pcidev->vendor != PCI_VENDOR_ID_CB)
- continue;
- /* loop through cards supported by this driver */
- for (i = 0; i < ARRAY_SIZE(cb_pcidas_boards); i++) {
- thisboard = &cb_pcidas_boards[i];
- if (thisboard->device_id != pcidev->device)
- continue;
- /* was a particular bus/slot requested? */
- if (bus || slot) {
- /* are we on the wrong bus/slot? */
- if (pcidev->bus->number != bus ||
- PCI_SLOT(pcidev->devfn) != slot) {
- continue;
- }
- }
- dev_dbg(dev->class_dev,
- "Found %s on bus %i, slot %i\n",
- thisboard->name,
- pcidev->bus->number, PCI_SLOT(pcidev->devfn));
- dev->board_ptr = thisboard;
- return pcidev;
- }
+ for (i = 0; i < ARRAY_SIZE(cb_pcidas_boards); i++) {
+ thisboard = &cb_pcidas_boards[i];
+ if (thisboard->device_id == pcidev->device)
+ return thisboard;
}
- dev_err(dev->class_dev, "No supported card found\n");
return NULL;
}
-static int cb_pcidas_attach(struct comedi_device *dev,
- struct comedi_devconfig *it)
+static int cb_pcidas_attach_pci(struct comedi_device *dev,
+ struct pci_dev *pcidev)
{
const struct cb_pcidas_board *thisboard;
struct cb_pcidas_private *devpriv;
- struct pci_dev *pcidev;
struct comedi_subdevice *s;
int i;
int ret;
- if (alloc_private(dev, sizeof(struct cb_pcidas_private)) < 0)
- return -ENOMEM;
- devpriv = dev->private;
-
- pcidev = cb_pcidas_find_pci_device(dev, it);
- if (!pcidev)
- return -EIO;
comedi_set_hw_dev(dev, &pcidev->dev);
- thisboard = comedi_board(dev);
- if (comedi_pci_enable(pcidev, dev->driver->driver_name)) {
- dev_err(dev->class_dev,
- "Failed to enable PCI device and request regions\n");
- return -EIO;
- }
+ thisboard = cb_pcidas_find_boardinfo(dev, pcidev);
+ if (!thisboard)
+ return -ENODEV;
+ dev->board_ptr = thisboard;
+ dev->board_name = thisboard->name;
+
+ ret = alloc_private(dev, sizeof(*devpriv));
+ if (ret)
+ return ret;
+ devpriv = dev->private;
+
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
devpriv->s5933_config = pci_resource_start(pcidev, 0);
devpriv->control_status = pci_resource_start(pcidev, 1);
}
dev->irq = pcidev->irq;
- dev->board_name = thisboard->name;
-
ret = comedi_alloc_subdevices(dev, 7);
if (ret)
return ret;
outl(devpriv->s5933_intcsr_bits | INTCSR_INBOX_INTR_STATUS,
devpriv->s5933_config + AMCC_OP_REG_INTCSR);
- return 1;
+ dev_info(dev->class_dev, "%s: %s attached\n",
+ dev->driver->driver_name, dev->board_name);
+
+ return 0;
}
static void cb_pcidas_detach(struct comedi_device *dev)
if (pcidev) {
if (devpriv->s5933_config)
comedi_pci_disable(pcidev);
- pci_dev_put(pcidev);
}
}
static struct comedi_driver cb_pcidas_driver = {
.driver_name = "cb_pcidas",
.module = THIS_MODULE,
- .attach = cb_pcidas_attach,
+ .attach_pci = cb_pcidas_attach_pci,
.detach = cb_pcidas_detach,
};