.lower_margin = 2,
.hsync_len = 0,
.vsync_len = 0,
- .sync = FB_SYNC_CLK_INVERT,
+ .sync = FB_SYNC_CLK_INVERT |
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
/* Sharp LK043T1DG01 */
[1] = {
.lower_margin = 2,
.hsync_len = 41,
.vsync_len = 10,
- .sync = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.flag = 0,
},
[2] = {
.lower_margin = 10,
.hsync_len = 10,
.vsync_len = 10,
- .sync = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.flag = 0,
},
};
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8);
break;
case 16:
+ default:
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16);
break;
- default:
- return -EINVAL;
}
reg |= (fifo_th << 8);
lcdc_write(reg, LCD_RASTER_TIMING_1_REG);
}
-static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
+static int lcd_cfg_display(const struct lcd_ctrl_config *cfg,
+ struct fb_videomode *panel)
{
u32 reg;
u32 reg_int;
LCD_MONO_8BIT_MODE |
LCD_MONOCHROME_MODE);
- switch (cfg->p_disp_panel->panel_shade) {
+ switch (cfg->panel_shade) {
case MONOCHROME:
reg |= LCD_MONOCHROME_MODE;
if (cfg->mono_8bit_mode)
break;
case COLOR_PASSIVE:
- if (cfg->stn_565_mode)
+ /* AC bias applicable only for Pasive panels */
+ lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt);
+ if (cfg->bpp == 12 && cfg->stn_565_mode)
reg |= LCD_STN_565_ENABLE;
break;
reg = lcdc_read(LCD_RASTER_TIMING_2_REG);
- if (cfg->sync_ctrl)
- reg |= LCD_SYNC_CTRL;
- else
- reg &= ~LCD_SYNC_CTRL;
+ reg |= LCD_SYNC_CTRL;
if (cfg->sync_edge)
reg |= LCD_SYNC_EDGE;
else
reg &= ~LCD_SYNC_EDGE;
- if (cfg->invert_line_clock)
+ if (panel->sync & FB_SYNC_HOR_HIGH_ACT)
reg |= LCD_INVERT_LINE_CLOCK;
else
reg &= ~LCD_INVERT_LINE_CLOCK;
- if (cfg->invert_frm_clock)
+ if (panel->sync & FB_SYNC_VERT_HIGH_ACT)
reg |= LCD_INVERT_FRAME_CLOCK;
else
reg &= ~LCD_INVERT_FRAME_CLOCK;
if (ret < 0)
return ret;
- /* Configure the AC bias properties. */
- lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt);
-
/* Configure the vertical and horizontal sync properties. */
lcd_cfg_vertical_sync(panel->lower_margin, panel->vsync_len,
panel->upper_margin);
panel->left_margin);
/* Configure for disply */
- ret = lcd_cfg_display(cfg);
+ ret = lcd_cfg_display(cfg, panel);
if (ret < 0)
return ret;
- if (QVGA != cfg->p_disp_panel->panel_type)
- return -EINVAL;
+ bpp = cfg->bpp;
- if (cfg->bpp <= cfg->p_disp_panel->max_bpp &&
- cfg->bpp >= cfg->p_disp_panel->min_bpp)
- bpp = cfg->bpp;
- else
- bpp = cfg->p_disp_panel->max_bpp;
if (bpp == 12)
bpp = 16;
ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->xres,
da8xx_fb_var.yres_virtual = lcdc_info->yres * LCD_NUM_BUFFERS;
da8xx_fb_var.grayscale =
- lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0;
+ lcd_cfg->panel_shade == MONOCHROME ? 1 : 0;
da8xx_fb_var.bits_per_pixel = lcd_cfg->bpp;
da8xx_fb_var.hsync_len = lcdc_info->hsync_len;
#ifndef DA8XX_FB_H
#define DA8XX_FB_H
-enum panel_type {
- QVGA = 0
-};
-
enum panel_shade {
MONOCHROME = 0,
COLOR_ACTIVE,
LOAD_PALETTE,
};
-struct display_panel {
- enum panel_type panel_type; /* QVGA */
- int max_bpp;
- int min_bpp;
- enum panel_shade panel_shade;
-};
-
struct da8xx_lcdc_platform_data {
const char manu_name[10];
void *controller_data;
};
struct lcd_ctrl_config {
- const struct display_panel *p_disp_panel;
+ enum panel_shade panel_shade;
/* AC Bias Pin Frequency */
int ac_bias;
/* Mono 8-bit Mode: 1=D0-D7 or 0=D0-D3 */
unsigned char mono_8bit_mode;
- /* Invert line clock */
- unsigned char invert_line_clock;
-
- /* Invert frame clock */
- unsigned char invert_frm_clock;
-
/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
unsigned char sync_edge;
- /* Horizontal and Vertical Sync: Control: 0=ignore */
- unsigned char sync_ctrl;
-
/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
unsigned char raster_order;