--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../efuse.h"
+#include "../base.h"
+#include "../regd.h"
+#include "../cam.h"
+#include "../ps.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+#include "led.h"
+#include "sw.h"
+#include "hw.h"
+
+u32 rtl92de_read_dword_dbi(struct ieee80211_hw *hw, u16 offset, u8 direct)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 value;
+
+ rtl_write_word(rtlpriv, REG_DBI_CTRL, (offset & 0xFFC));
+ rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(1) | direct);
+ udelay(10);
+ value = rtl_read_dword(rtlpriv, REG_DBI_RDATA);
+ return value;
+}
+
+void rtl92de_write_dword_dbi(struct ieee80211_hw *hw,
+ u16 offset, u32 value, u8 direct)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtl_write_word(rtlpriv, REG_DBI_CTRL, ((offset & 0xFFC) | 0xF000));
+ rtl_write_dword(rtlpriv, REG_DBI_WDATA, value);
+ rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(0) | direct);
+}
+
+static void _rtl92de_set_bcn_ctrl_reg(struct ieee80211_hw *hw,
+ u8 set_bits, u8 clear_bits)
+{
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtlpci->reg_bcn_ctrl_val |= set_bits;
+ rtlpci->reg_bcn_ctrl_val &= ~clear_bits;
+ rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlpci->reg_bcn_ctrl_val);
+}
+
+static void _rtl92de_stop_tx_beacon(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 tmp1byte;
+
+ tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
+ rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte & (~BIT(6)));
+ rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xff);
+ rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0x64);
+ tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
+ tmp1byte &= ~(BIT(0));
+ rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
+}
+
+static void _rtl92de_resume_tx_beacon(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 tmp1byte;
+
+ tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
+ rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte | BIT(6));
+ rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a);
+ rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
+ tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
+ tmp1byte |= BIT(0);
+ rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
+}
+
+static void _rtl92de_enable_bcn_sub_func(struct ieee80211_hw *hw)
+{
+ _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(1));
+}
+
+static void _rtl92de_disable_bcn_sub_func(struct ieee80211_hw *hw)
+{
+ _rtl92de_set_bcn_ctrl_reg(hw, BIT(1), 0);
+}
+
+void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ switch (variable) {
+ case HW_VAR_RCR:
+ *((u32 *) (val)) = rtlpci->receive_config;
+ break;
+ case HW_VAR_RF_STATE:
+ *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
+ break;
+ case HW_VAR_FWLPS_RF_ON:{
+ enum rf_pwrstate rfState;
+ u32 val_rcr;
+
+ rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE,
+ (u8 *) (&rfState));
+ if (rfState == ERFOFF) {
+ *((bool *) (val)) = true;
+ } else {
+ val_rcr = rtl_read_dword(rtlpriv, REG_RCR);
+ val_rcr &= 0x00070000;
+ if (val_rcr)
+ *((bool *) (val)) = false;
+ else
+ *((bool *) (val)) = true;
+ }
+ break;
+ }
+ case HW_VAR_FW_PSMODE_STATUS:
+ *((bool *) (val)) = ppsc->fw_current_inpsmode;
+ break;
+ case HW_VAR_CORRECT_TSF:{
+ u64 tsf;
+ u32 *ptsf_low = (u32 *)&tsf;
+ u32 *ptsf_high = ((u32 *)&tsf) + 1;
+
+ *ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR + 4));
+ *ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR);
+ *((u64 *) (val)) = tsf;
+ break;
+ }
+ case HW_VAR_INT_MIGRATION:
+ *((bool *)(val)) = rtlpriv->dm.interrupt_migration;
+ break;
+ case HW_VAR_INT_AC:
+ *((bool *)(val)) = rtlpriv->dm.disable_tx_int;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+}
+
+void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ u8 idx;
+
+ switch (variable) {
+ case HW_VAR_ETHER_ADDR:
+ for (idx = 0; idx < ETH_ALEN; idx++) {
+ rtl_write_byte(rtlpriv, (REG_MACID + idx),
+ val[idx]);
+ }
+ break;
+ case HW_VAR_BASIC_RATE: {
+ u16 rate_cfg = ((u16 *) val)[0];
+ u8 rate_index = 0;
+
+ rate_cfg = rate_cfg & 0x15f;
+ if (mac->vendor == PEER_CISCO &&
+ ((rate_cfg & 0x150) == 0))
+ rate_cfg |= 0x01;
+ rtl_write_byte(rtlpriv, REG_RRSR, rate_cfg & 0xff);
+ rtl_write_byte(rtlpriv, REG_RRSR + 1,
+ (rate_cfg >> 8) & 0xff);
+ while (rate_cfg > 0x1) {
+ rate_cfg = (rate_cfg >> 1);
+ rate_index++;
+ }
+ if (rtlhal->fw_version > 0xe)
+ rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL,
+ rate_index);
+ break;
+ }
+ case HW_VAR_BSSID:
+ for (idx = 0; idx < ETH_ALEN; idx++) {
+ rtl_write_byte(rtlpriv, (REG_BSSID + idx),
+ val[idx]);
+ }
+ break;
+ case HW_VAR_SIFS:
+ rtl_write_byte(rtlpriv, REG_SIFS_CTX + 1, val[0]);
+ rtl_write_byte(rtlpriv, REG_SIFS_TRX + 1, val[1]);
+ rtl_write_byte(rtlpriv, REG_SPEC_SIFS + 1, val[0]);
+ rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS + 1, val[0]);
+ if (!mac->ht_enable)
+ rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM,
+ 0x0e0e);
+ else
+ rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM,
+ *((u16 *) val));
+ break;
+ case HW_VAR_SLOT_TIME: {
+ u8 e_aci;
+
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ ("HW_VAR_SLOT_TIME %x\n", val[0]));
+ rtl_write_byte(rtlpriv, REG_SLOT, val[0]);
+ for (e_aci = 0; e_aci < AC_MAX; e_aci++)
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_AC_PARAM,
+ (u8 *) (&e_aci));
+ break;
+ }
+ case HW_VAR_ACK_PREAMBLE: {
+ u8 reg_tmp;
+ u8 short_preamble = (bool) (*(u8 *) val);
+
+ reg_tmp = (mac->cur_40_prime_sc) << 5;
+ if (short_preamble)
+ reg_tmp |= 0x80;
+ rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_tmp);
+ break;
+ }
+ case HW_VAR_AMPDU_MIN_SPACE: {
+ u8 min_spacing_to_set;
+ u8 sec_min_space;
+
+ min_spacing_to_set = *((u8 *) val);
+ if (min_spacing_to_set <= 7) {
+ sec_min_space = 0;
+ if (min_spacing_to_set < sec_min_space)
+ min_spacing_to_set = sec_min_space;
+ mac->min_space_cfg = ((mac->min_space_cfg & 0xf8) |
+ min_spacing_to_set);
+ *val = min_spacing_to_set;
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
+ mac->min_space_cfg));
+ rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
+ mac->min_space_cfg);
+ }
+ break;
+ }
+ case HW_VAR_SHORTGI_DENSITY: {
+ u8 density_to_set;
+
+ density_to_set = *((u8 *) val);
+ mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg;
+ mac->min_space_cfg |= (density_to_set << 3);
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ ("Set HW_VAR_SHORTGI_DENSITY: %#x\n",
+ mac->min_space_cfg));
+ rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
+ mac->min_space_cfg);
+ break;
+ }
+ case HW_VAR_AMPDU_FACTOR: {
+ u8 factor_toset;
+ u32 regtoSet;
+ u8 *ptmp_byte = NULL;
+ u8 index;
+
+ if (rtlhal->macphymode == DUALMAC_DUALPHY)
+ regtoSet = 0xb9726641;
+ else if (rtlhal->macphymode == DUALMAC_SINGLEPHY)
+ regtoSet = 0x66626641;
+ else
+ regtoSet = 0xb972a841;
+ factor_toset = *((u8 *) val);
+ if (factor_toset <= 3) {
+ factor_toset = (1 << (factor_toset + 2));
+ if (factor_toset > 0xf)
+ factor_toset = 0xf;
+ for (index = 0; index < 4; index++) {
+ ptmp_byte = (u8 *) (®toSet) + index;
+ if ((*ptmp_byte & 0xf0) >
+ (factor_toset << 4))
+ *ptmp_byte = (*ptmp_byte & 0x0f)
+ | (factor_toset << 4);
+ if ((*ptmp_byte & 0x0f) > factor_toset)
+ *ptmp_byte = (*ptmp_byte & 0xf0)
+ | (factor_toset);
+ }
+ rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, regtoSet);
+ RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+ ("Set HW_VAR_AMPDU_FACTOR: %#x\n",
+ factor_toset));
+ }
+ break;
+ }
+ case HW_VAR_AC_PARAM: {
+ u8 e_aci = *((u8 *) val);
+ rtl92d_dm_init_edca_turbo(hw);
+ if (rtlpci->acm_method != eAcmWay2_SW)
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL,
+ (u8 *) (&e_aci));
+ break;
+ }
+ case HW_VAR_ACM_CTRL: {
+ u8 e_aci = *((u8 *) val);
+ union aci_aifsn *p_aci_aifsn =
+ (union aci_aifsn *)(&(mac->ac[0].aifs));
+ u8 acm = p_aci_aifsn->f.acm;
+ u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL);
+
+ acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ? 0x0 : 0x1);
+ if (acm) {
+ switch (e_aci) {
+ case AC0_BE:
+ acm_ctrl |= ACMHW_BEQEN;
+ break;
+ case AC2_VI:
+ acm_ctrl |= ACMHW_VIQEN;
+ break;
+ case AC3_VO:
+ acm_ctrl |= ACMHW_VOQEN;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("HW_VAR_ACM_CTRL acm set "
+ "failed: eACI is %d\n", acm));
+ break;
+ }
+ } else {
+ switch (e_aci) {
+ case AC0_BE:
+ acm_ctrl &= (~ACMHW_BEQEN);
+ break;
+ case AC2_VI:
+ acm_ctrl &= (~ACMHW_VIQEN);
+ break;
+ case AC3_VO:
+ acm_ctrl &= (~ACMHW_VOQEN);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+ }
+ RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
+ ("SetHwReg8190pci(): [HW_VAR_ACM_CTRL] "
+ "Write 0x%X\n", acm_ctrl));
+ rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl);
+ break;
+ }
+ case HW_VAR_RCR:
+ rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]);
+ rtlpci->receive_config = ((u32 *) (val))[0];
+ break;
+ case HW_VAR_RETRY_LIMIT: {
+ u8 retry_limit = ((u8 *) (val))[0];
+
+ rtl_write_word(rtlpriv, REG_RL,
+ retry_limit << RETRY_LIMIT_SHORT_SHIFT |
+ retry_limit << RETRY_LIMIT_LONG_SHIFT);
+ break;
+ }
+ case HW_VAR_DUAL_TSF_RST:
+ rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, (BIT(0) | BIT(1)));
+ break;
+ case HW_VAR_EFUSE_BYTES:
+ rtlefuse->efuse_usedbytes = *((u16 *) val);
+ break;
+ case HW_VAR_EFUSE_USAGE:
+ rtlefuse->efuse_usedpercentage = *((u8 *) val);
+ break;
+ case HW_VAR_IO_CMD:
+ rtl92d_phy_set_io_cmd(hw, (*(enum io_type *)val));
+ break;
+ case HW_VAR_WPA_CONFIG:
+ rtl_write_byte(rtlpriv, REG_SECCFG, *((u8 *) val));
+ break;
+ case HW_VAR_SET_RPWM:
+ rtl92d_fill_h2c_cmd(hw, H2C_PWRM, 1, (u8 *) (val));
+ break;
+ case HW_VAR_H2C_FW_PWRMODE:
+ break;
+ case HW_VAR_FW_PSMODE_STATUS:
+ ppsc->fw_current_inpsmode = *((bool *) val);
+ break;
+ case HW_VAR_H2C_FW_JOINBSSRPT: {
+ u8 mstatus = (*(u8 *) val);
+ u8 tmp_regcr, tmp_reg422;
+ bool recover = false;
+
+ if (mstatus == RT_MEDIA_CONNECT) {
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_AID, NULL);
+ tmp_regcr = rtl_read_byte(rtlpriv, REG_CR + 1);
+ rtl_write_byte(rtlpriv, REG_CR + 1,
+ (tmp_regcr | BIT(0)));
+ _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3));
+ _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0);
+ tmp_reg422 = rtl_read_byte(rtlpriv,
+ REG_FWHW_TXQ_CTRL + 2);
+ if (tmp_reg422 & BIT(6))
+ recover = true;
+ rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
+ tmp_reg422 & (~BIT(6)));
+ rtl92d_set_fw_rsvdpagepkt(hw, 0);
+ _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0);
+ _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4));
+ if (recover)
+ rtl_write_byte(rtlpriv,
+ REG_FWHW_TXQ_CTRL + 2,
+ tmp_reg422);
+ rtl_write_byte(rtlpriv, REG_CR + 1,
+ (tmp_regcr & ~(BIT(0))));
+ }
+ rtl92d_set_fw_joinbss_report_cmd(hw, (*(u8 *) val));
+ break;
+ }
+ case HW_VAR_AID: {
+ u16 u2btmp;
+ u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT);
+ u2btmp &= 0xC000;
+ rtl_write_word(rtlpriv, REG_BCN_PSR_RPT, (u2btmp |
+ mac->assoc_id));
+ break;
+ }
+ case HW_VAR_CORRECT_TSF: {
+ u8 btype_ibss = ((u8 *) (val))[0];
+
+ if (btype_ibss == true)
+ _rtl92de_stop_tx_beacon(hw);
+ _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3));
+ rtl_write_dword(rtlpriv, REG_TSFTR,
+ (u32) (mac->tsf & 0xffffffff));
+ rtl_write_dword(rtlpriv, REG_TSFTR + 4,
+ (u32) ((mac->tsf >> 32) & 0xffffffff));
+ _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0);
+ if (btype_ibss == true)
+ _rtl92de_resume_tx_beacon(hw);
+
+ break;
+ }
+ case HW_VAR_INT_MIGRATION: {
+ bool int_migration = *(bool *) (val);
+
+ if (int_migration) {
+ /* Set interrrupt migration timer and
+ * corresponging Tx/Rx counter.
+ * timer 25ns*0xfa0=100us for 0xf packets.
+ * 0x306:Rx, 0x307:Tx */
+ rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0);
+ rtlpriv->dm.interrupt_migration = int_migration;
+ } else {
+ /* Reset all interrupt migration settings. */
+ rtl_write_dword(rtlpriv, REG_INT_MIG, 0);
+ rtlpriv->dm.interrupt_migration = int_migration;
+ }
+ break;
+ }
+ case HW_VAR_INT_AC: {
+ bool disable_ac_int = *((bool *) val);
+
+ /* Disable four ACs interrupts. */
+ if (disable_ac_int) {
+ /* Disable VO, VI, BE and BK four AC interrupts
+ * to gain more efficient CPU utilization.
+ * When extremely highly Rx OK occurs,
+ * we will disable Tx interrupts.
+ */
+ rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
+ RT_AC_INT_MASKS);
+ rtlpriv->dm.disable_tx_int = disable_ac_int;
+ /* Enable four ACs interrupts. */
+ } else {
+ rtlpriv->cfg->ops->update_interrupt_mask(hw,
+ RT_AC_INT_MASKS, 0);
+ rtlpriv->dm.disable_tx_int = disable_ac_int;
+ }
+ break;
+ }
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+}
+
+static bool _rtl92de_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ bool status = true;
+ long count = 0;
+ u32 value = _LLT_INIT_ADDR(address) |
+ _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS);
+
+ rtl_write_dword(rtlpriv, REG_LLT_INIT, value);
+ do {
+ value = rtl_read_dword(rtlpriv, REG_LLT_INIT);
+ if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
+ break;
+ if (count > POLLING_LLT_THRESHOLD) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Failed to polling write LLT done at "
+ "address %d!\n", address));
+ status = false;
+ break;
+ }
+ } while (++count);
+ return status;
+}
+
+static bool _rtl92de_llt_table_init(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ unsigned short i;
+ u8 txpktbuf_bndy;
+ u8 maxPage;
+ bool status;
+ u32 value32; /* High+low page number */
+ u8 value8; /* normal page number */
+
+ if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) {
+ maxPage = 255;
+ txpktbuf_bndy = 246;
+ value8 = 0;
+ value32 = 0x80bf0d29;
+ } else if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) {
+ maxPage = 127;
+ txpktbuf_bndy = 123;
+ value8 = 0;
+ value32 = 0x80750005;
+ }
+
+ /* Set reserved page for each queue */
+ /* 11. RQPN 0x200[31:0] = 0x80BD1C1C */
+ /* load RQPN */
+ rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8);
+ rtl_write_dword(rtlpriv, REG_RQPN, value32);
+
+ /* 12. TXRKTBUG_PG_BNDY 0x114[31:0] = 0x27FF00F6 */
+ /* TXRKTBUG_PG_BNDY */
+ rtl_write_dword(rtlpriv, REG_TRXFF_BNDY,
+ (rtl_read_word(rtlpriv, REG_TRXFF_BNDY + 2) << 16 |
+ txpktbuf_bndy));
+
+ /* 13. TDECTRL[15:8] 0x209[7:0] = 0xF6 */
+ /* Beacon Head for TXDMA */
+ rtl_write_byte(rtlpriv, REG_TDECTRL + 1, txpktbuf_bndy);
+
+ /* 14. BCNQ_PGBNDY 0x424[7:0] = 0xF6 */
+ /* BCNQ_PGBNDY */
+ rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
+ rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
+
+ /* 15. WMAC_LBK_BF_HD 0x45D[7:0] = 0xF6 */
+ /* WMAC_LBK_BF_HD */
+ rtl_write_byte(rtlpriv, 0x45D, txpktbuf_bndy);
+
+ /* Set Tx/Rx page size (Tx must be 128 Bytes, */
+ /* Rx can be 64,128,256,512,1024 bytes) */
+ /* 16. PBP [7:0] = 0x11 */
+ /* TRX page size */
+ rtl_write_byte(rtlpriv, REG_PBP, 0x11);
+
+ /* 17. DRV_INFO_SZ = 0x04 */
+ rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, 0x4);
+
+ /* 18. LLT_table_init(Adapter); */
+ for (i = 0; i < (txpktbuf_bndy - 1); i++) {
+ status = _rtl92de_llt_write(hw, i, i + 1);
+ if (true != status)
+ return status;
+ }
+
+ /* end of list */
+ status = _rtl92de_llt_write(hw, (txpktbuf_bndy - 1), 0xFF);
+ if (true != status)
+ return status;
+
+ /* Make the other pages as ring buffer */
+ /* This ring buffer is used as beacon buffer if we */
+ /* config this MAC as two MAC transfer. */
+ /* Otherwise used as local loopback buffer. */
+ for (i = txpktbuf_bndy; i < maxPage; i++) {
+ status = _rtl92de_llt_write(hw, i, (i + 1));
+ if (true != status)
+ return status;
+ }
+
+ /* Let last entry point to the start entry of ring buffer */
+ status = _rtl92de_llt_write(hw, maxPage, txpktbuf_bndy);
+ if (true != status)
+ return status;
+
+ return true;
+}
+
+static void _rtl92de_gen_refresh_led_state(struct ieee80211_hw *hw)
+{
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+
+ if (rtlpci->up_first_time)
+ return;
+ if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS)
+ rtl92ce_sw_led_on(hw, pLed0);
+ else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT)
+ rtl92ce_sw_led_on(hw, pLed0);
+ else
+ rtl92ce_sw_led_off(hw, pLed0);
+}
+
+static bool _rtl92de_init_mac(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ unsigned char bytetmp;
+ unsigned short wordtmp;
+ u16 retry;
+
+ rtl92d_phy_set_poweron(hw);
+ /* Add for resume sequence of power domain according
+ * to power document V11. Chapter V.11.... */
+ /* 0. RSV_CTRL 0x1C[7:0] = 0x00 */
+ /* unlock ISO/CLK/Power control register */
+ rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00);
+ rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x05);
+
+ /* 1. AFE_XTAL_CTRL [7:0] = 0x0F enable XTAL */
+ /* 2. SPS0_CTRL 0x11[7:0] = 0x2b enable SPS into PWM mode */
+ /* 3. delay (1ms) this is not necessary when initially power on */
+
+ /* C. Resume Sequence */
+ /* a. SPS0_CTRL 0x11[7:0] = 0x2b */
+ rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b);
+
+ /* b. AFE_XTAL_CTRL [7:0] = 0x0F */
+ rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0F);
+
+ /* c. DRV runs power on init flow */
+
+ /* auto enable WLAN */
+ /* 4. APS_FSMCO 0x04[8] = 1; wait till 0x04[8] = 0 */
+ /* Power On Reset for MAC Block */
+ bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) | BIT(0);
+ udelay(2);
+ rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, bytetmp);
+ udelay(2);
+
+ /* 5. Wait while 0x04[8] == 0 goto 2, otherwise goto 1 */
+ bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
+ udelay(50);
+ retry = 0;
+ while ((bytetmp & BIT(0)) && retry < 1000) {
+ retry++;
+ bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
+ udelay(50);
+ }
+
+ /* Enable Radio off, GPIO, and LED function */
+ /* 6. APS_FSMCO 0x04[15:0] = 0x0012 when enable HWPDN */
+ rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x1012);
+
+ /* release RF digital isolation */
+ /* 7. SYS_ISO_CTRL 0x01[1] = 0x0; */
+ /*Set REG_SYS_ISO_CTRL 0x1=0x82 to prevent wake# problem. */
+ rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x82);
+ udelay(2);
+
+ /* make sure that BB reset OK. */
+ /* rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3); */
+
+ /* Disable REG_CR before enable it to assure reset */
+ rtl_write_word(rtlpriv, REG_CR, 0x0);
+
+ /* Release MAC IO register reset */
+ rtl_write_word(rtlpriv, REG_CR, 0x2ff);
+
+ /* clear stopping tx/rx dma */
+ rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0x0);
+
+ /* rtl_write_word(rtlpriv,REG_CR+2, 0x2); */
+
+ /* System init */
+ /* 18. LLT_table_init(Adapter); */
+ if (_rtl92de_llt_table_init(hw) == false)
+ return false;
+
+ /* Clear interrupt and enable interrupt */
+ /* 19. HISR 0x124[31:0] = 0xffffffff; */
+ /* HISRE 0x12C[7:0] = 0xFF */
+ rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff);
+ rtl_write_byte(rtlpriv, REG_HISRE, 0xff);
+
+ /* 20. HIMR 0x120[31:0] |= [enable INT mask bit map]; */
+ /* 21. HIMRE 0x128[7:0] = [enable INT mask bit map] */
+ /* The IMR should be enabled later after all init sequence
+ * is finished. */
+
+ /* 22. PCIE configuration space configuration */
+ /* 23. Ensure PCIe Device 0x80[15:0] = 0x0143 (ASPM+CLKREQ), */
+ /* and PCIe gated clock function is enabled. */
+ /* PCIE configuration space will be written after
+ * all init sequence.(Or by BIOS) */
+
+ rtl92d_phy_config_maccoexist_rfpage(hw);
+
+ /* THe below section is not related to power document Vxx . */
+ /* This is only useful for driver and OS setting. */
+ /* -------------------Software Relative Setting---------------------- */
+ wordtmp = rtl_read_word(rtlpriv, REG_TRXDMA_CTRL);
+ wordtmp &= 0xf;
+ wordtmp |= 0xF771;
+ rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, wordtmp);
+
+ /* Reported Tx status from HW for rate adaptive. */
+ /* This should be realtive to power on step 14. But in document V11 */
+ /* still not contain the description.!!! */
+ rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 1, 0x1F);
+
+ /* Set Tx/Rx page size (Tx must be 128 Bytes,
+ * Rx can be 64,128,256,512,1024 bytes) */
+ /* rtl_write_byte(rtlpriv,REG_PBP, 0x11); */
+
+ /* Set RCR register */
+ rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
+ /* rtl_write_byte(rtlpriv,REG_RX_DRVINFO_SZ, 4); */
+
+ /* Set TCR register */
+ rtl_write_dword(rtlpriv, REG_TCR, rtlpci->transmit_config);
+
+ /* disable earlymode */
+ rtl_write_byte(rtlpriv, 0x4d0, 0x0);
+
+ /* Set TX/RX descriptor physical address(from OS API). */
+ rtl_write_dword(rtlpriv, REG_BCNQ_DESA,
+ rtlpci->tx_ring[BEACON_QUEUE].dma);
+ rtl_write_dword(rtlpriv, REG_MGQ_DESA, rtlpci->tx_ring[MGNT_QUEUE].dma);
+ rtl_write_dword(rtlpriv, REG_VOQ_DESA, rtlpci->tx_ring[VO_QUEUE].dma);
+ rtl_write_dword(rtlpriv, REG_VIQ_DESA, rtlpci->tx_ring[VI_QUEUE].dma);
+ rtl_write_dword(rtlpriv, REG_BEQ_DESA, rtlpci->tx_ring[BE_QUEUE].dma);
+ rtl_write_dword(rtlpriv, REG_BKQ_DESA, rtlpci->tx_ring[BK_QUEUE].dma);
+ rtl_write_dword(rtlpriv, REG_HQ_DESA, rtlpci->tx_ring[HIGH_QUEUE].dma);
+ /* Set RX Desc Address */
+ rtl_write_dword(rtlpriv, REG_RX_DESA,
+ rtlpci->rx_ring[RX_MPDU_QUEUE].dma);
+
+ /* if we want to support 64 bit DMA, we should set it here,
+ * but now we do not support 64 bit DMA*/
+
+ rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, 0x33);
+
+ /* Reset interrupt migration setting when initialization */
+ rtl_write_dword(rtlpriv, REG_INT_MIG, 0);
+
+ /* Reconsider when to do this operation after asking HWSD. */
+ bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
+ rtl_write_byte(rtlpriv, REG_APSD_CTRL, bytetmp & ~BIT(6));
+ do {
+ retry++;
+ bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
+ } while ((retry < 200) && !(bytetmp & BIT(7)));
+
+ /* After MACIO reset,we must refresh LED state. */
+ _rtl92de_gen_refresh_led_state(hw);
+
+ /* Reset H2C protection register */
+ rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0);
+
+ return true;
+}
+
+static void _rtl92de_hw_configure(struct ieee80211_hw *hw)
+{
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u8 reg_bw_opmode = BW_OPMODE_20MHZ;
+ u32 reg_rrsr;
+
+ reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+ rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8);
+ rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
+ rtl_write_dword(rtlpriv, REG_RRSR, reg_rrsr);
+ rtl_write_byte(rtlpriv, REG_SLOT, 0x09);
+ rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 0x0);
+ rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F80);
+ rtl_write_word(rtlpriv, REG_RL, 0x0707);
+ rtl_write_dword(rtlpriv, REG_BAR_MODE_CTRL, 0x02012802);
+ rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF);
+ rtl_write_dword(rtlpriv, REG_DARFRC, 0x01000000);
+ rtl_write_dword(rtlpriv, REG_DARFRC + 4, 0x07060504);
+ rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000);
+ rtl_write_dword(rtlpriv, REG_RARFRC + 4, 0x07060504);
+ /* Aggregation threshold */
+ if (rtlhal->macphymode == DUALMAC_DUALPHY)
+ rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb9726641);
+ else if (rtlhal->macphymode == DUALMAC_SINGLEPHY)
+ rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0x66626641);
+ else
+ rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841);
+ rtl_write_byte(rtlpriv, REG_ATIMWND, 0x2);
+ rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a);
+ rtlpci->reg_bcn_ctrl_val = 0x1f;
+ rtl_write_byte(rtlpriv, REG_BCN_CTRL, rtlpci->reg_bcn_ctrl_val);
+ rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
+ rtl_write_byte(rtlpriv, REG_PIFS, 0x1C);
+ rtl_write_byte(rtlpriv, REG_AGGR_BREAK_TIME, 0x16);
+ rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020);
+ /* For throughput */
+ rtl_write_word(rtlpriv, REG_FAST_EDCA_CTRL, 0x6666);
+ /* ACKTO for IOT issue. */
+ rtl_write_byte(rtlpriv, REG_ACKTO, 0x40);
+ /* Set Spec SIFS (used in NAV) */
+ rtl_write_word(rtlpriv, REG_SPEC_SIFS, 0x1010);
+ rtl_write_word(rtlpriv, REG_MAC_SPEC_SIFS, 0x1010);
+ /* Set SIFS for CCK */
+ rtl_write_word(rtlpriv, REG_SIFS_CTX, 0x1010);
+ /* Set SIFS for OFDM */
+ rtl_write_word(rtlpriv, REG_SIFS_TRX, 0x1010);
+ /* Set Multicast Address. */
+ rtl_write_dword(rtlpriv, REG_MAR, 0xffffffff);
+ rtl_write_dword(rtlpriv, REG_MAR + 4, 0xffffffff);
+ switch (rtlpriv->phy.rf_type) {
+ case RF_1T2R:
+ case RF_1T1R:
+ rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3);
+ break;
+ case RF_2T2R:
+ case RF_2T2R_GREEN:
+ rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3);
+ break;
+ }
+}
+
+static void _rtl92de_enable_aspm_back_door(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ rtl_write_byte(rtlpriv, 0x34b, 0x93);
+ rtl_write_word(rtlpriv, 0x350, 0x870c);
+ rtl_write_byte(rtlpriv, 0x352, 0x1);
+ if (ppsc->support_backdoor)
+ rtl_write_byte(rtlpriv, 0x349, 0x1b);
+ else
+ rtl_write_byte(rtlpriv, 0x349, 0x03);
+ rtl_write_word(rtlpriv, 0x350, 0x2718);
+ rtl_write_byte(rtlpriv, 0x352, 0x1);
+}
+
+void rtl92de_enable_hw_security_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 sec_reg_value;
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
+ rtlpriv->sec.pairwise_enc_algorithm,
+ rtlpriv->sec.group_enc_algorithm));
+ if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ ("not open hw encryption\n"));
+ return;
+ }
+ sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE;
+ if (rtlpriv->sec.use_defaultkey) {
+ sec_reg_value |= SCR_TXUSEDK;
+ sec_reg_value |= SCR_RXUSEDK;
+ }
+ sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK);
+ rtl_write_byte(rtlpriv, REG_CR + 1, 0x02);
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ ("The SECR-value %x\n", sec_reg_value));
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
+}
+
+int rtl92de_hw_init(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ bool rtstatus = true;
+ u8 tmp_u1b, i;
+ int err;
+ unsigned long flags;
+
+ rtlpci->being_init_adapter = true;
+ rtlpci->init_ready = false;
+ spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags);
+ /* we should do iqk after disable/enable */
+ rtl92d_phy_reset_iqk_result(hw);
+ /* rtlpriv->intf_ops->disable_aspm(hw); */
+ rtstatus = _rtl92de_init_mac(hw);
+ if (rtstatus != true) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Init MAC failed\n"));
+ err = 1;
+ spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
+ return err;
+ }
+ err = rtl92d_download_fw(hw);
+ spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
+ if (err) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("Failed to download FW. Init HW "
+ "without FW..\n"));
+ err = 1;
+ rtlhal->fw_ready = false;
+ } else {
+ rtlhal->fw_ready = true;
+ }
+ rtlhal->last_hmeboxnum = 0;
+ rtlpriv->psc.fw_current_inpsmode = false;
+
+ tmp_u1b = rtl_read_byte(rtlpriv, 0x605);
+ tmp_u1b = tmp_u1b | 0x30;
+ rtl_write_byte(rtlpriv, 0x605, tmp_u1b);
+
+ if (rtlhal->earlymode_enable) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EarlyMode Enabled!!!\n"));
+
+ tmp_u1b = rtl_read_byte(rtlpriv, 0x4d0);
+ tmp_u1b = tmp_u1b | 0x1f;
+ rtl_write_byte(rtlpriv, 0x4d0, tmp_u1b);
+
+ rtl_write_byte(rtlpriv, 0x4d3, 0x80);
+
+ tmp_u1b = rtl_read_byte(rtlpriv, 0x605);
+ tmp_u1b = tmp_u1b | 0x40;
+ rtl_write_byte(rtlpriv, 0x605, tmp_u1b);
+ }
+
+ if (mac->rdg_en) {
+ rtl_write_byte(rtlpriv, REG_RD_CTRL, 0xff);
+ rtl_write_word(rtlpriv, REG_RD_NAV_NXT, 0x200);
+ rtl_write_byte(rtlpriv, REG_RD_RESP_PKT_TH, 0x05);
+ }
+
+ rtl92d_phy_mac_config(hw);
+ /* because last function modify RCR, so we update
+ * rcr var here, or TP will unstable for receive_config
+ * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+ * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/
+ rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR);
+ rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
+
+ rtl92d_phy_bb_config(hw);
+
+ rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
+ /* set before initialize RF */
+ rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf);
+
+ /* config RF */
+ rtl92d_phy_rf_config(hw);
+
+ /* After read predefined TXT, we must set BB/MAC/RF
+ * register as our requirement */
+ /* After load BB,RF params,we need do more for 92D. */
+ rtl92d_update_bbrf_configuration(hw);
+ /* set default value after initialize RF, */
+ rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0);
+ rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0,
+ RF_CHNLBW, BRFREGOFFSETMASK);
+ rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1,
+ RF_CHNLBW, BRFREGOFFSETMASK);
+
+ /*---- Set CCK and OFDM Block "ON"----*/
+ if (rtlhal->current_bandtype == BAND_ON_2_4G)
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
+ if (rtlhal->interfaceindex == 0) {
+ /* RFPGA0_ANALOGPARAMETER2: cck clock select,
+ * set to 20MHz by default */
+ rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10) |
+ BIT(11), 3);
+ } else {
+ /* Mac1 */
+ rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(11) |
+ BIT(10), 3);
+ }
+
+ _rtl92de_hw_configure(hw);
+
+ /* reset hw sec */
+ rtl_cam_reset_all_entry(hw);
+ rtl92de_enable_hw_security_config(hw);
+
+ /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
+ /* TX power index for different rate set. */
+ rtl92d_phy_get_hw_reg_originalvalue(hw);
+ rtl92d_phy_set_txpower_level(hw, rtlphy->current_channel);
+
+ ppsc->rfpwr_state = ERFON;
+
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
+
+ _rtl92de_enable_aspm_back_door(hw);
+ /* rtlpriv->intf_ops->enable_aspm(hw); */
+
+ rtl92d_dm_init(hw);
+ rtlpci->being_init_adapter = false;
+
+ if (ppsc->rfpwr_state == ERFON) {
+ rtl92d_phy_lc_calibrate(hw);
+ /* 5G and 2.4G must wait sometime to let RF LO ready */
+ if (rtlhal->macphymode == DUALMAC_DUALPHY) {
+ u32 tmp_rega;
+ for (i = 0; i < 10000; i++) {
+ udelay(MAX_STALL_TIME);
+
+ tmp_rega = rtl_get_rfreg(hw,
+ (enum radio_path)RF90_PATH_A,
+ 0x2a, BMASKDWORD);
+
+ if (((tmp_rega & BIT(11)) == BIT(11)))
+ break;
+ }
+ }
+ }
+ rtlpci->init_ready = true;
+ return err;
+}
+
+static enum version_8192d _rtl92de_read_chip_version(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ enum version_8192d version = VERSION_NORMAL_CHIP_92D_SINGLEPHY;
+ u32 value32;
+
+ value32 = rtl_read_dword(rtlpriv, REG_SYS_CFG);
+ if (!(value32 & 0x000f0000)) {
+ version = VERSION_TEST_CHIP_92D_SINGLEPHY;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("TEST CHIP!!!\n"));
+ } else {
+ version = VERSION_NORMAL_CHIP_92D_SINGLEPHY;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Normal CHIP!!!\n"));
+ }
+ return version;
+}
+
+static int _rtl92de_set_media_status(struct ieee80211_hw *hw,
+ enum nl80211_iftype type)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
+ enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
+ u8 bcnfunc_enable;
+
+ bt_msr &= 0xfc;
+
+ if (type == NL80211_IFTYPE_UNSPECIFIED ||
+ type == NL80211_IFTYPE_STATION) {
+ _rtl92de_stop_tx_beacon(hw);
+ _rtl92de_enable_bcn_sub_func(hw);
+ } else if (type == NL80211_IFTYPE_ADHOC ||
+ type == NL80211_IFTYPE_AP) {
+ _rtl92de_resume_tx_beacon(hw);
+ _rtl92de_disable_bcn_sub_func(hw);
+ } else {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("Set HW_VAR_MEDIA_STATUS: No such media "
+ "status(%x).\n", type));
+ }
+ bcnfunc_enable = rtl_read_byte(rtlpriv, REG_BCN_CTRL);
+ switch (type) {
+ case NL80211_IFTYPE_UNSPECIFIED:
+ bt_msr |= MSR_NOLINK;
+ ledaction = LED_CTL_LINK;
+ bcnfunc_enable &= 0xF7;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ ("Set Network type to NO LINK!\n"));
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ bt_msr |= MSR_ADHOC;
+ bcnfunc_enable |= 0x08;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ ("Set Network type to Ad Hoc!\n"));
+ break;
+ case NL80211_IFTYPE_STATION:
+ bt_msr |= MSR_INFRA;
+ ledaction = LED_CTL_LINK;
+ bcnfunc_enable &= 0xF7;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ ("Set Network type to STA!\n"));
+ break;
+ case NL80211_IFTYPE_AP:
+ bt_msr |= MSR_AP;
+ bcnfunc_enable |= 0x08;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ ("Set Network type to AP!\n"));
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Network type %d not support!\n", type));
+ return 1;
+ break;
+
+ }
+ rtl_write_byte(rtlpriv, REG_CR + 2, bt_msr);
+ rtlpriv->cfg->ops->led_control(hw, ledaction);
+ if ((bt_msr & 0xfc) == MSR_AP)
+ rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00);
+ else
+ rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66);
+ return 0;
+}
+
+void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ u32 reg_rcr = rtlpci->receive_config;
+
+ if (rtlpriv->psc.rfpwr_state != ERFON)
+ return;
+ if (check_bssid == true) {
+ reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr));
+ _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4));
+ } else if (check_bssid == false) {
+ reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
+ _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0);
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr));
+ }
+}
+
+int rtl92de_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (_rtl92de_set_media_status(hw, type))
+ return -EOPNOTSUPP;
+
+ /* check bssid */
+ if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+ if (type != NL80211_IFTYPE_AP)
+ rtl92de_set_check_bssid(hw, true);
+ } else {
+ rtl92de_set_check_bssid(hw, false);
+ }
+ return 0;
+}
+
+/* do iqk or reload iqk */
+/* windows just rtl92d_phy_reload_iqk_setting in set channel,
+ * but it's very strict for time sequence so we add
+ * rtl92d_phy_reload_iqk_setting here */
+void rtl92d_linked_set_reg(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u8 indexforchannel;
+ u8 channel = rtlphy->current_channel;
+
+ indexforchannel = rtl92d_get_rightchnlplace_for_iqk(channel);
+ if (!rtlphy->iqk_matrix_regsetting[indexforchannel].iqk_done) {
+ RT_TRACE(rtlpriv, COMP_SCAN | COMP_INIT, DBG_DMESG,
+ ("Do IQK for channel:%d.\n", channel));
+ rtl92d_phy_iq_calibrate(hw);
+ }
+}
+
+/* don't set REG_EDCA_BE_PARAM here because
+ * mac80211 will send pkt when scan */
+void rtl92de_set_qos(struct ieee80211_hw *hw, int aci)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ rtl92d_dm_init_edca_turbo(hw);
+ return;
+ switch (aci) {
+ case AC1_BK:
+ rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, 0xa44f);
+ break;
+ case AC0_BE:
+ break;
+ case AC2_VI:
+ rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM, 0x5e4322);
+ break;
+ case AC3_VO:
+ rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM, 0x2f3222);
+ break;
+ default:
+ RT_ASSERT(false, ("invalid aci: %d !\n", aci));
+ break;
+ }
+}
+
+void rtl92de_enable_interrupt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
+ rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
+ rtlpci->irq_enabled = true;
+}
+
+void rtl92de_disable_interrupt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED);
+ rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED);
+ rtlpci->irq_enabled = false;
+ synchronize_irq(rtlpci->pdev->irq);
+}
+
+static void _rtl92de_poweroff_adapter(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 u1b_tmp;
+ unsigned long flags;
+
+ rtlpriv->intf_ops->enable_aspm(hw);
+ rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00);
+ rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(3), 0);
+ rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(15), 0);
+
+ /* 0x20:value 05-->04 */
+ rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x04);
+
+ /* ==== Reset digital sequence ====== */
+ rtl92d_firmware_selfreset(hw);
+
+ /* f. SYS_FUNC_EN 0x03[7:0]=0x51 reset MCU, MAC register, DCORE */
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x51);
+
+ /* g. MCUFWDL 0x80[1:0]=0 reset MCU ready status */
+ rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
+
+ /* ==== Pull GPIO PIN to balance level and LED control ====== */
+
+ /* h. GPIO_PIN_CTRL 0x44[31:0]=0x000 */
+ rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00000000);
+
+ /* i. Value = GPIO_PIN_CTRL[7:0] */
+ u1b_tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL);
+
+ /* j. GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); */
+ /* write external PIN level */
+ rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL,
+ 0x00FF0000 | (u1b_tmp << 8));
+
+ /* k. GPIO_MUXCFG 0x42 [15:0] = 0x0780 */
+ rtl_write_word(rtlpriv, REG_GPIO_IO_SEL, 0x0790);
+
+ /* l. LEDCFG 0x4C[15:0] = 0x8080 */
+ rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080);
+
+ /* ==== Disable analog sequence === */
+
+ /* m. AFE_PLL_CTRL[7:0] = 0x80 disable PLL */
+ rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80);
+
+ /* n. SPS0_CTRL 0x11[7:0] = 0x22 enter PFM mode */
+ rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23);
+
+ /* o. AFE_XTAL_CTRL 0x24[7:0] = 0x0E disable XTAL, if No BT COEX */
+ rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e);
+
+ /* p. RSV_CTRL 0x1C[7:0] = 0x0E lock ISO/CLK/Power control register */
+ rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e);
+
+ /* ==== interface into suspend === */
+
+ /* q. APS_FSMCO[15:8] = 0x58 PCIe suspend mode */
+ /* According to power document V11, we need to set this */
+ /* value as 0x18. Otherwise, we may not L0s sometimes. */
+ /* This indluences power consumption. Bases on SD1's test, */
+ /* set as 0x00 do not affect power current. And if it */
+ /* is set as 0x18, they had ever met auto load fail problem. */
+ rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, 0x10);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("In PowerOff,reg0x%x=%X\n", REG_SPS0_CTRL,
+ rtl_read_byte(rtlpriv, REG_SPS0_CTRL)));
+ /* r. Note: for PCIe interface, PON will not turn */
+ /* off m-bias and BandGap in PCIe suspend mode. */
+
+ /* 0x17[7] 1b': power off in process 0b' : power off over */
+ if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) {
+ spin_lock_irqsave(&globalmutex_power, flags);
+ u1b_tmp = rtl_read_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS);
+ u1b_tmp &= (~BIT(7));
+ rtl_write_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS, u1b_tmp);
+ spin_unlock_irqrestore(&globalmutex_power, flags);
+ }
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("<=======\n"));
+}
+
+void rtl92de_card_disable(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ enum nl80211_iftype opmode;
+
+ mac->link_state = MAC80211_NOLINK;
+ opmode = NL80211_IFTYPE_UNSPECIFIED;
+ _rtl92de_set_media_status(hw, opmode);
+
+ if (rtlpci->driver_is_goingto_unload ||
+ ppsc->rfoff_reason > RF_CHANGE_BY_PS)
+ rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+ /* Power sequence for each MAC. */
+ /* a. stop tx DMA */
+ /* b. close RF */
+ /* c. clear rx buf */
+ /* d. stop rx DMA */
+ /* e. reset MAC */
+
+ /* a. stop tx DMA */
+ rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xFE);
+ udelay(50);
+
+ /* b. TXPAUSE 0x522[7:0] = 0xFF Pause MAC TX queue */
+
+ /* c. ========RF OFF sequence========== */
+ /* 0x88c[23:20] = 0xf. */
+ rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf);
+ rtl_set_rfreg(hw, RF90_PATH_A, 0x00, BRFREGOFFSETMASK, 0x00);
+
+ /* APSD_CTRL 0x600[7:0] = 0x40 */
+ rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
+
+ /* Close antenna 0,0xc04,0xd04 */
+ rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, BMASKBYTE0, 0);
+ rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0);
+
+ /* SYS_FUNC_EN 0x02[7:0] = 0xE2 reset BB state machine */
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
+
+ /* Mac0 can not do Global reset. Mac1 can do. */
+ /* SYS_FUNC_EN 0x02[7:0] = 0xE0 reset BB state machine */
+ if (rtlpriv->rtlhal.interfaceindex == 1)
+ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE0);
+ udelay(50);
+
+ /* d. stop tx/rx dma before disable REG_CR (0x100) to fix */
+ /* dma hang issue when disable/enable device. */
+ rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xff);
+ udelay(50);
+ rtl_write_byte(rtlpriv, REG_CR, 0x0);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("==> Do power off.......\n"));
+ if (rtl92d_phy_check_poweroff(hw))
+ _rtl92de_poweroff_adapter(hw);
+ return;
+}
+
+void rtl92de_interrupt_recognized(struct ieee80211_hw *hw,
+ u32 *p_inta, u32 *p_intb)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ *p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0];
+ rtl_write_dword(rtlpriv, ISR, *p_inta);
+
+ /*
+ * *p_intb = rtl_read_dword(rtlpriv, REG_HISRE) & rtlpci->irq_mask[1];
+ * rtl_write_dword(rtlpriv, ISR + 4, *p_intb);
+ */
+}
+
+void rtl92de_set_beacon_related_registers(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 bcn_interval, atim_window;
+
+ bcn_interval = mac->beacon_interval;
+ atim_window = 2;
+ /*rtl92de_disable_interrupt(hw); */
+ rtl_write_word(rtlpriv, REG_ATIMWND, atim_window);
+ rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
+ rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660f);
+ rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x20);
+ if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G)
+ rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x30);
+ else
+ rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x20);
+ rtl_write_byte(rtlpriv, 0x606, 0x30);
+}
+
+void rtl92de_set_beacon_interval(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 bcn_interval = mac->beacon_interval;
+
+ RT_TRACE(rtlpriv, COMP_BEACON, DBG_DMESG,
+ ("beacon_interval:%d\n", bcn_interval));
+ /* rtl92de_disable_interrupt(hw); */
+ rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
+ /* rtl92de_enable_interrupt(hw); */
+}
+
+void rtl92de_update_interrupt_mask(struct ieee80211_hw *hw,
+ u32 add_msr, u32 rm_msr)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
+ ("add_msr:%x, rm_msr:%x\n", add_msr, rm_msr));
+ if (add_msr)
+ rtlpci->irq_mask[0] |= add_msr;
+ if (rm_msr)
+ rtlpci->irq_mask[0] &= (~rm_msr);
+ rtl92de_disable_interrupt(hw);
+ rtl92de_enable_interrupt(hw);
+}
+
+static void _rtl92de_readpowervalue_fromprom(struct txpower_info *pwrinfo,
+ u8 *rom_content, bool autoLoadfail)
+{
+ u32 rfpath, eeaddr, group, offset1, offset2;
+ u8 i;
+
+ memset(pwrinfo, 0, sizeof(struct txpower_info));
+ if (autoLoadfail) {
+ for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
+ for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
+ if (group < CHANNEL_GROUP_MAX_2G) {
+ pwrinfo->cck_index[rfpath][group] =
+ EEPROM_DEFAULT_TXPOWERLEVEL_2G;
+ pwrinfo->ht40_1sindex[rfpath][group] =
+ EEPROM_DEFAULT_TXPOWERLEVEL_2G;
+ } else {
+ pwrinfo->ht40_1sindex[rfpath][group] =
+ EEPROM_DEFAULT_TXPOWERLEVEL_5G;
+ }
+ pwrinfo->ht40_2sindexdiff[rfpath][group] =
+ EEPROM_DEFAULT_HT40_2SDIFF;
+ pwrinfo->ht20indexdiff[rfpath][group] =
+ EEPROM_DEFAULT_HT20_DIFF;
+ pwrinfo->ofdmindexdiff[rfpath][group] =
+ EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF;
+ pwrinfo->ht40maxoffset[rfpath][group] =
+ EEPROM_DEFAULT_HT40_PWRMAXOFFSET;
+ pwrinfo->ht20maxoffset[rfpath][group] =
+ EEPROM_DEFAULT_HT20_PWRMAXOFFSET;
+ }
+ }
+ for (i = 0; i < 3; i++) {
+ pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI;
+ pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI;
+ }
+ return;
+ }
+
+ /* Maybe autoload OK,buf the tx power index value is not filled.
+ * If we find it, we set it to default value. */
+ for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
+ for (group = 0; group < CHANNEL_GROUP_MAX_2G; group++) {
+ eeaddr = EEPROM_CCK_TX_PWR_INX_2G + (rfpath * 3)
+ + group;
+ pwrinfo->cck_index[rfpath][group] =
+ (rom_content[eeaddr] == 0xFF) ?
+ (eeaddr > 0x7B ?
+ EEPROM_DEFAULT_TXPOWERLEVEL_5G :
+ EEPROM_DEFAULT_TXPOWERLEVEL_2G) :
+ rom_content[eeaddr];
+ }
+ }
+ for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
+ for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
+ offset1 = group / 3;
+ offset2 = group % 3;
+ eeaddr = EEPROM_HT40_1S_TX_PWR_INX_2G + (rfpath * 3) +
+ offset2 + offset1 * 21;
+ pwrinfo->ht40_1sindex[rfpath][group] =
+ (rom_content[eeaddr] == 0xFF) ? (eeaddr > 0x7B ?
+ EEPROM_DEFAULT_TXPOWERLEVEL_5G :
+ EEPROM_DEFAULT_TXPOWERLEVEL_2G) :
+ rom_content[eeaddr];
+ }
+ }
+ /* These just for 92D efuse offset. */
+ for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
+ for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
+ int base1 = EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G;
+
+ offset1 = group / 3;
+ offset2 = group % 3;
+
+ if (rom_content[base1 + offset2 + offset1 * 21] != 0xFF)
+ pwrinfo->ht40_2sindexdiff[rfpath][group] =
+ (rom_content[base1 +
+ offset2 + offset1 * 21] >> (rfpath * 4))
+ & 0xF;
+ else
+ pwrinfo->ht40_2sindexdiff[rfpath][group] =
+ EEPROM_DEFAULT_HT40_2SDIFF;
+ if (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G + offset2
+ + offset1 * 21] != 0xFF)
+ pwrinfo->ht20indexdiff[rfpath][group] =
+ (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G
+ + offset2 + offset1 * 21] >> (rfpath * 4))
+ & 0xF;
+ else
+ pwrinfo->ht20indexdiff[rfpath][group] =
+ EEPROM_DEFAULT_HT20_DIFF;
+ if (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G + offset2
+ + offset1 * 21] != 0xFF)
+ pwrinfo->ofdmindexdiff[rfpath][group] =
+ (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G
+ + offset2 + offset1 * 21] >> (rfpath * 4))
+ & 0xF;
+ else
+ pwrinfo->ofdmindexdiff[rfpath][group] =
+ EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF;
+ if (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G + offset2
+ + offset1 * 21] != 0xFF)
+ pwrinfo->ht40maxoffset[rfpath][group] =
+ (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G
+ + offset2 + offset1 * 21] >> (rfpath * 4))
+ & 0xF;
+ else
+ pwrinfo->ht40maxoffset[rfpath][group] =
+ EEPROM_DEFAULT_HT40_PWRMAXOFFSET;
+ if (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G + offset2
+ + offset1 * 21] != 0xFF)
+ pwrinfo->ht20maxoffset[rfpath][group] =
+ (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G +
+ offset2 + offset1 * 21] >> (rfpath * 4)) &
+ 0xF;
+ else
+ pwrinfo->ht20maxoffset[rfpath][group] =
+ EEPROM_DEFAULT_HT20_PWRMAXOFFSET;
+ }
+ }
+ if (rom_content[EEPROM_TSSI_A_5G] != 0xFF) {
+ /* 5GL */
+ pwrinfo->tssi_a[0] = rom_content[EEPROM_TSSI_A_5G] & 0x3F;
+ pwrinfo->tssi_b[0] = rom_content[EEPROM_TSSI_B_5G] & 0x3F;
+ /* 5GM */
+ pwrinfo->tssi_a[1] = rom_content[EEPROM_TSSI_AB_5G] & 0x3F;
+ pwrinfo->tssi_b[1] =
+ (rom_content[EEPROM_TSSI_AB_5G] & 0xC0) >> 6 |
+ (rom_content[EEPROM_TSSI_AB_5G + 1] & 0x0F) << 2;
+ /* 5GH */
+ pwrinfo->tssi_a[2] = (rom_content[EEPROM_TSSI_AB_5G + 1] &
+ 0xF0) >> 4 |
+ (rom_content[EEPROM_TSSI_AB_5G + 2] & 0x03) << 4;
+ pwrinfo->tssi_b[2] = (rom_content[EEPROM_TSSI_AB_5G + 2] &
+ 0xFC) >> 2;
+ } else {
+ for (i = 0; i < 3; i++) {
+ pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI;
+ pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI;
+ }
+ }
+}
+
+static void _rtl92de_read_txpower_info(struct ieee80211_hw *hw,
+ bool autoload_fail, u8 *hwinfo)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct txpower_info pwrinfo;
+ u8 tempval[2], i, pwr, diff;
+ u32 ch, rfPath, group;
+
+ _rtl92de_readpowervalue_fromprom(&pwrinfo, hwinfo, autoload_fail);
+ if (!autoload_fail) {
+ /* bit0~2 */
+ rtlefuse->eeprom_regulatory = (hwinfo[EEPROM_RF_OPT1] & 0x7);
+ rtlefuse->eeprom_thermalmeter =
+ hwinfo[EEPROM_THERMAL_METER] & 0x1f;
+ rtlefuse->crystalcap = hwinfo[EEPROM_XTAL_K];
+ tempval[0] = hwinfo[EEPROM_IQK_DELTA] & 0x03;
+ tempval[1] = (hwinfo[EEPROM_LCK_DELTA] & 0x0C) >> 2;
+ rtlefuse->txpwr_fromeprom = true;
+ if (IS_92D_D_CUT(rtlpriv->rtlhal.version)) {
+ rtlefuse->internal_pa_5g[0] =
+ !((hwinfo[EEPROM_TSSI_A_5G] &
+ BIT(6)) >> 6);
+ rtlefuse->internal_pa_5g[1] =
+ !((hwinfo[EEPROM_TSSI_B_5G] &
+ BIT(6)) >> 6);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("Is D cut,Internal PA0 %d Internal PA1 %d\n",
+ rtlefuse->internal_pa_5g[0],
+ rtlefuse->internal_pa_5g[1]))
+ }
+ rtlefuse->eeprom_c9 = hwinfo[EEPROM_RF_OPT6];
+ rtlefuse->eeprom_cc = hwinfo[EEPROM_RF_OPT7];
+ } else {
+ rtlefuse->eeprom_regulatory = 0;
+ rtlefuse->eeprom_thermalmeter = EEPROM_DEFAULT_THERMALMETER;
+ rtlefuse->crystalcap = EEPROM_DEFAULT_CRYSTALCAP;
+ tempval[0] = tempval[1] = 3;
+ }
+
+ /* Use default value to fill parameters if
+ * efuse is not filled on some place. */
+
+ /* ThermalMeter from EEPROM */
+ if (rtlefuse->eeprom_thermalmeter < 0x06 ||
+ rtlefuse->eeprom_thermalmeter > 0x1c)
+ rtlefuse->eeprom_thermalmeter = 0x12;
+ rtlefuse->thermalmeter[0] = rtlefuse->eeprom_thermalmeter;
+
+ /* check XTAL_K */
+ if (rtlefuse->crystalcap == 0xFF)
+ rtlefuse->crystalcap = 0;
+ if (rtlefuse->eeprom_regulatory > 3)
+ rtlefuse->eeprom_regulatory = 0;
+
+ for (i = 0; i < 2; i++) {
+ switch (tempval[i]) {
+ case 0:
+ tempval[i] = 5;
+ break;
+ case 1:
+ tempval[i] = 4;
+ break;
+ case 2:
+ tempval[i] = 3;
+ break;
+ case 3:
+ default:
+ tempval[i] = 0;
+ break;
+ }
+ }
+
+ rtlefuse->delta_iqk = tempval[0];
+ if (tempval[1] > 0)
+ rtlefuse->delta_lck = tempval[1] - 1;
+ if (rtlefuse->eeprom_c9 == 0xFF)
+ rtlefuse->eeprom_c9 = 0x00;
+ RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
+ ("EEPROMRegulatory = 0x%x\n", rtlefuse->eeprom_regulatory));
+ RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
+ ("ThermalMeter = 0x%x\n", rtlefuse->eeprom_thermalmeter));
+ RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
+ ("CrystalCap = 0x%x\n", rtlefuse->crystalcap));
+ RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
+ ("Delta_IQK = 0x%x Delta_LCK = 0x%x\n", rtlefuse->delta_iqk,
+ rtlefuse->delta_lck));
+
+ for (rfPath = 0; rfPath < RF6052_MAX_PATH; rfPath++) {
+ for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) {
+ group = rtl92d_get_chnlgroup_fromarray((u8) ch);
+ if (ch < CHANNEL_MAX_NUMBER_2G)
+ rtlefuse->txpwrlevel_cck[rfPath][ch] =
+ pwrinfo.cck_index[rfPath][group];
+ rtlefuse->txpwrlevel_ht40_1s[rfPath][ch] =
+ pwrinfo.ht40_1sindex[rfPath][group];
+ rtlefuse->txpwr_ht20diff[rfPath][ch] =
+ pwrinfo.ht20indexdiff[rfPath][group];
+ rtlefuse->txpwr_legacyhtdiff[rfPath][ch] =
+ pwrinfo.ofdmindexdiff[rfPath][group];
+ rtlefuse->pwrgroup_ht20[rfPath][ch] =
+ pwrinfo.ht20maxoffset[rfPath][group];
+ rtlefuse->pwrgroup_ht40[rfPath][ch] =
+ pwrinfo.ht40maxoffset[rfPath][group];
+ pwr = pwrinfo.ht40_1sindex[rfPath][group];
+ diff = pwrinfo.ht40_2sindexdiff[rfPath][group];
+ rtlefuse->txpwrlevel_ht40_2s[rfPath][ch] =
+ (pwr > diff) ? (pwr - diff) : 0;
+ }
+ }
+}
+
+static void _rtl92de_read_macphymode_from_prom(struct ieee80211_hw *hw,
+ u8 *content)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u8 macphy_crvalue = content[EEPROM_MAC_FUNCTION];
+
+ if (macphy_crvalue & BIT(3)) {
+ rtlhal->macphymode = SINGLEMAC_SINGLEPHY;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("MacPhyMode SINGLEMAC_SINGLEPHY\n"));
+ } else {
+ rtlhal->macphymode = DUALMAC_DUALPHY;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("MacPhyMode DUALMAC_DUALPHY\n"));
+ }
+}
+
+static void _rtl92de_read_macphymode_and_bandtype(struct ieee80211_hw *hw,
+ u8 *content)
+{
+ _rtl92de_read_macphymode_from_prom(hw, content);
+ rtl92d_phy_config_macphymode(hw);
+ rtl92d_phy_config_macphymode_info(hw);
+}
+
+static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ enum version_8192d chipver = rtlpriv->rtlhal.version;
+ u8 cutvalue[2];
+ u16 chipvalue;
+
+ rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_H,
+ &cutvalue[1]);
+ rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_L,
+ &cutvalue[0]);
+ chipvalue = (cutvalue[1] << 8) | cutvalue[0];
+ switch (chipvalue) {
+ case 0xAA55:
+ chipver |= CHIP_92D_C_CUT;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("C-CUT!!!\n"));
+ break;
+ case 0x9966:
+ chipver |= CHIP_92D_D_CUT;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("D-CUT!!!\n"));
+ break;
+ default:
+ chipver |= CHIP_92D_D_CUT;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, ("Unkown CUT!\n"));
+ break;
+ }
+ rtlpriv->rtlhal.version = chipver;
+}
+
+static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u16 i, usvalue;
+ u8 hwinfo[HWSET_MAX_SIZE];
+ u16 eeprom_id;
+ unsigned long flags;
+
+ if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+ spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags);
+ rtl_efuse_shadow_map_update(hw);
+ _rtl92de_efuse_update_chip_version(hw);
+ spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
+ memcpy((void *)hwinfo, (void *)&rtlefuse->efuse_map
+ [EFUSE_INIT_MAP][0],
+ HWSET_MAX_SIZE);
+ } else if (rtlefuse->epromtype == EEPROM_93C46) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("RTL819X Not boot from eeprom, check it !!"));
+ }
+ RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, ("MAP\n"),
+ hwinfo, HWSET_MAX_SIZE);
+
+ eeprom_id = *((u16 *)&hwinfo[0]);
+ if (eeprom_id != RTL8190_EEPROM_ID) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("EEPROM ID(%#x) is invalid!!\n", eeprom_id));
+ rtlefuse->autoload_failflag = true;
+ } else {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+ rtlefuse->autoload_failflag = false;
+ }
+ if (rtlefuse->autoload_failflag == true) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("RTL819X Not boot from eeprom, check it !!"));
+ return;
+ }
+ rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID];
+ _rtl92de_read_macphymode_and_bandtype(hw, hwinfo);
+
+ /* VID, DID SE 0xA-D */
+ rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
+ rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
+ rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
+ rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EEPROMId = 0x%4x\n", eeprom_id));
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid));
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did));
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid));
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid));
+
+ /* Read Permanent MAC address */
+ if (rtlhal->interfaceindex == 0) {
+ for (i = 0; i < 6; i += 2) {
+ usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC0_92D + i];
+ *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
+ }
+ } else {
+ for (i = 0; i < 6; i += 2) {
+ usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC1_92D + i];
+ *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
+ }
+ }
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR,
+ rtlefuse->dev_addr);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+ (MAC_FMT "\n", MAC_ARG(rtlefuse->dev_addr)));
+ _rtl92de_read_txpower_info(hw, rtlefuse->autoload_failflag, hwinfo);
+
+ /* Read Channel Plan */
+ switch (rtlhal->bandset) {
+ case BAND_ON_2_4G:
+ rtlefuse->channel_plan = COUNTRY_CODE_TELEC;
+ break;
+ case BAND_ON_5G:
+ rtlefuse->channel_plan = COUNTRY_CODE_FCC;
+ break;
+ case BAND_ON_BOTH:
+ rtlefuse->channel_plan = COUNTRY_CODE_FCC;
+ break;
+ default:
+ rtlefuse->channel_plan = COUNTRY_CODE_FCC;
+ break;
+ }
+ rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
+ rtlefuse->txpwr_fromeprom = true;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid));
+}
+
+void rtl92de_read_eeprom_info(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u8 tmp_u1b;
+
+ rtlhal->version = _rtl92de_read_chip_version(hw);
+ tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR);
+ rtlefuse->autoload_status = tmp_u1b;
+ if (tmp_u1b & BIT(4)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EEPROM\n"));
+ rtlefuse->epromtype = EEPROM_93C46;
+ } else {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EFUSE\n"));
+ rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
+ }
+ if (tmp_u1b & BIT(5)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+
+ rtlefuse->autoload_failflag = false;
+ _rtl92de_read_adapter_info(hw);
+ } else {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Autoload ERR!!\n"));
+ }
+ return;
+}
+
+static void rtl92de_update_hal_rate_table(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u32 ratr_value;
+ u8 ratr_index = 0;
+ u8 nmode = mac->ht_enable;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+ u16 shortgi_rate;
+ u32 tmp_ratr_value;
+ u8 curtxbw_40mhz = mac->bw_40;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = mac->mode;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_value = sta->supp_rates[1] << 4;
+ else
+ ratr_value = sta->supp_rates[0];
+ ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
+ switch (wirelessmode) {
+ case WIRELESS_MODE_A:
+ ratr_value &= 0x00000FF0;
+ break;
+ case WIRELESS_MODE_B:
+ if (ratr_value & 0x0000000c)
+ ratr_value &= 0x0000000d;
+ else
+ ratr_value &= 0x0000000f;
+ break;
+ case WIRELESS_MODE_G:
+ ratr_value &= 0x00000FF5;
+ break;
+ case WIRELESS_MODE_N_24G:
+ case WIRELESS_MODE_N_5G:
+ nmode = 1;
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
+ ratr_value &= 0x0007F005;
+ } else {
+ u32 ratr_mask;
+
+ if (get_rf_type(rtlphy) == RF_1T2R ||
+ get_rf_type(rtlphy) == RF_1T1R) {
+ ratr_mask = 0x000ff005;
+ } else {
+ ratr_mask = 0x0f0ff005;
+ }
+
+ ratr_value &= ratr_mask;
+ }
+ break;
+ default:
+ if (rtlphy->rf_type == RF_1T2R)
+ ratr_value &= 0x000ff0ff;
+ else
+ ratr_value &= 0x0f0ff0ff;
+
+ break;
+ }
+ ratr_value &= 0x0FFFFFFF;
+ if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) ||
+ (!curtxbw_40mhz && curshortgi_20mhz))) {
+ ratr_value |= 0x10000000;
+ tmp_ratr_value = (ratr_value >> 12);
+ for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+ if ((1 << shortgi_rate) & tmp_ratr_value)
+ break;
+ }
+ shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+ (shortgi_rate << 4) | (shortgi_rate);
+ }
+ rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+ ("%x\n", rtl_read_dword(rtlpriv, REG_ARFR0)));
+}
+
+static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_sta_info *sta_entry = NULL;
+ u32 ratr_bitmap;
+ u8 ratr_index;
+ u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
+ ? 1 : 0;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = 0;
+ bool shortgi = false;
+ u32 value[2];
+ u8 macid = 0;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ mimo_ps = sta_entry->mimo_ps;
+ wirelessmode = sta_entry->wireless_mode;
+ if (mac->opmode == NL80211_IFTYPE_STATION)
+ curtxbw_40mhz = mac->bw_40;
+ else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC)
+ macid = sta->aid + 1;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_bitmap = sta->supp_rates[1] << 4;
+ else
+ ratr_bitmap = sta->supp_rates[0];
+ ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
+ switch (wirelessmode) {
+ case WIRELESS_MODE_B:
+ ratr_index = RATR_INX_WIRELESS_B;
+ if (ratr_bitmap & 0x0000000c)
+ ratr_bitmap &= 0x0000000d;
+ else
+ ratr_bitmap &= 0x0000000f;
+ break;
+ case WIRELESS_MODE_G:
+ ratr_index = RATR_INX_WIRELESS_GB;
+
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x00000f00;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x00000ff0;
+ else
+ ratr_bitmap &= 0x00000ff5;
+ break;
+ case WIRELESS_MODE_A:
+ ratr_index = RATR_INX_WIRELESS_G;
+ ratr_bitmap &= 0x00000ff0;
+ break;
+ case WIRELESS_MODE_N_24G:
+ case WIRELESS_MODE_N_5G:
+ if (wirelessmode == WIRELESS_MODE_N_24G)
+ ratr_index = RATR_INX_WIRELESS_NGB;
+ else
+ ratr_index = RATR_INX_WIRELESS_NG;
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x00070000;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x0007f000;
+ else
+ ratr_bitmap &= 0x0007f005;
+ } else {
+ if (rtlphy->rf_type == RF_1T2R ||
+ rtlphy->rf_type == RF_1T1R) {
+ if (curtxbw_40mhz) {
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x000f0000;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x000ff000;
+ else
+ ratr_bitmap &= 0x000ff015;
+ } else {
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x000f0000;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x000ff000;
+ else
+ ratr_bitmap &= 0x000ff005;
+ }
+ } else {
+ if (curtxbw_40mhz) {
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x0f0f0000;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x0f0ff000;
+ else
+ ratr_bitmap &= 0x0f0ff015;
+ } else {
+ if (rssi_level == 1)
+ ratr_bitmap &= 0x0f0f0000;
+ else if (rssi_level == 2)
+ ratr_bitmap &= 0x0f0ff000;
+ else
+ ratr_bitmap &= 0x0f0ff005;
+ }
+ }
+ }
+ if ((curtxbw_40mhz && curshortgi_40mhz) ||
+ (!curtxbw_40mhz && curshortgi_20mhz)) {
+
+ if (macid == 0)
+ shortgi = true;
+ else if (macid == 1)
+ shortgi = false;
+ }
+ break;
+ default:
+ ratr_index = RATR_INX_WIRELESS_NGB;
+
+ if (rtlphy->rf_type == RF_1T2R)
+ ratr_bitmap &= 0x000ff0ff;
+ else
+ ratr_bitmap &= 0x0f0ff0ff;
+ break;
+ }
+
+ value[0] = (ratr_bitmap & 0x0fffffff) | (ratr_index << 28);
+ value[1] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+ ("ratr_bitmap :%x value0:%x value1:%x\n",
+ ratr_bitmap, value[0], value[1]));
+ rtl92d_fill_h2c_cmd(hw, H2C_RA_MASK, 5, (u8 *) value);
+ if (macid != 0)
+ sta_entry->ratr_index = ratr_index;
+}
+
+void rtl92de_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->dm.useramask)
+ rtl92de_update_hal_rate_mask(hw, sta, rssi_level);
+ else
+ rtl92de_update_hal_rate_table(hw, sta);
+}
+
+void rtl92de_update_channel_access_setting(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u16 sifs_timer;
+
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
+ (u8 *)&mac->slot_time);
+ if (!mac->ht_enable)
+ sifs_timer = 0x0a0a;
+ else
+ sifs_timer = 0x1010;
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
+}
+
+bool rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ enum rf_pwrstate e_rfpowerstate_toset;
+ u8 u1tmp;
+ bool actuallyset = false;
+ unsigned long flag;
+
+ if (rtlpci->being_init_adapter)
+ return false;
+ if (ppsc->swrf_processing)
+ return false;
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ if (ppsc->rfchange_inprogress) {
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ return false;
+ } else {
+ ppsc->rfchange_inprogress = true;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ }
+ rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, rtl_read_byte(rtlpriv,
+ REG_MAC_PINMUX_CFG) & ~(BIT(3)));
+ u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL);
+ e_rfpowerstate_toset = (u1tmp & BIT(3)) ? ERFON : ERFOFF;
+ if ((ppsc->hwradiooff == true) && (e_rfpowerstate_toset == ERFON)) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ ("GPIOChangeRF - HW Radio ON, RF ON\n"));
+ e_rfpowerstate_toset = ERFON;
+ ppsc->hwradiooff = false;
+ actuallyset = true;
+ } else if ((ppsc->hwradiooff == false)
+ && (e_rfpowerstate_toset == ERFOFF)) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ ("GPIOChangeRF - HW Radio OFF, RF OFF\n"));
+ e_rfpowerstate_toset = ERFOFF;
+ ppsc->hwradiooff = true;
+ actuallyset = true;
+ }
+ if (actuallyset) {
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ ppsc->rfchange_inprogress = false;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ } else {
+ if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC)
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ ppsc->rfchange_inprogress = false;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ }
+ *valid = 1;
+ return !ppsc->hwradiooff;
+}
+
+void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index,
+ u8 *p_macaddr, bool is_group, u8 enc_algo,
+ bool is_wepkey, bool clear_all)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 *macaddr = p_macaddr;
+ u32 entry_id;
+ bool is_pairwise = false;
+ static u8 cam_const_addr[4][6] = {
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
+ };
+ static u8 cam_const_broad[] = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+ };
+
+ if (clear_all) {
+ u8 idx;
+ u8 cam_offset = 0;
+ u8 clear_number = 5;
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("clear_all\n"));
+ for (idx = 0; idx < clear_number; idx++) {
+ rtl_cam_mark_invalid(hw, cam_offset + idx);
+ rtl_cam_empty_entry(hw, cam_offset + idx);
+
+ if (idx < 5) {
+ memset(rtlpriv->sec.key_buf[idx], 0,
+ MAX_KEY_LEN);
+ rtlpriv->sec.key_len[idx] = 0;
+ }
+ }
+ } else {
+ switch (enc_algo) {
+ case WEP40_ENCRYPTION:
+ enc_algo = CAM_WEP40;
+ break;
+ case WEP104_ENCRYPTION:
+ enc_algo = CAM_WEP104;
+ break;
+ case TKIP_ENCRYPTION:
+ enc_algo = CAM_TKIP;
+ break;
+ case AESCCMP_ENCRYPTION:
+ enc_algo = CAM_AES;
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("switch case "
+ "not process\n"));
+ enc_algo = CAM_TKIP;
+ break;
+ }
+ if (is_wepkey || rtlpriv->sec.use_defaultkey) {
+ macaddr = cam_const_addr[key_index];
+ entry_id = key_index;
+ } else {
+ if (is_group) {
+ macaddr = cam_const_broad;
+ entry_id = key_index;
+ } else {
+ if (mac->opmode == NL80211_IFTYPE_AP) {
+ entry_id = rtl_cam_get_free_entry(hw,
+ p_macaddr);
+ if (entry_id >= TOTAL_CAM_ENTRY) {
+ RT_TRACE(rtlpriv, COMP_SEC,
+ DBG_EMERG, ("Can not "
+ "find free hw security"
+ " cam entry\n"));
+ return;
+ }
+ } else {
+ entry_id = CAM_PAIRWISE_KEY_POSITION;
+ }
+ key_index = PAIRWISE_KEYIDX;
+ is_pairwise = true;
+ }
+ }
+ if (rtlpriv->sec.key_len[key_index] == 0) {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ ("delete one entry, entry_id is %d\n",
+ entry_id));
+ if (mac->opmode == NL80211_IFTYPE_AP)
+ rtl_cam_del_entry(hw, p_macaddr);
+ rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
+ } else {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ ("The insert KEY length is %d\n",
+ rtlpriv->sec.key_len[PAIRWISE_KEYIDX]));
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+ ("The insert KEY is %x %x\n",
+ rtlpriv->sec.key_buf[0][0],
+ rtlpriv->sec.key_buf[0][1]));
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ ("add one entry\n"));
+ if (is_pairwise) {
+ RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD,
+ "Pairwiase Key content :",
+ rtlpriv->sec.pairwise_key,
+ rtlpriv->
+ sec.key_len[PAIRWISE_KEYIDX]);
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ ("set Pairwiase key\n"));
+ rtl_cam_add_one_entry(hw, macaddr, key_index,
+ entry_id, enc_algo,
+ CAM_CONFIG_NO_USEDK,
+ rtlpriv->
+ sec.key_buf[key_index]);
+ } else {
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+ ("set group key\n"));
+ if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+ rtl_cam_add_one_entry(hw,
+ rtlefuse->dev_addr,
+ PAIRWISE_KEYIDX,
+ CAM_PAIRWISE_KEY_POSITION,
+ enc_algo, CAM_CONFIG_NO_USEDK,
+ rtlpriv->sec.key_buf[entry_id]);
+ }
+ rtl_cam_add_one_entry(hw, macaddr, key_index,
+ entry_id, enc_algo,
+ CAM_CONFIG_NO_USEDK,
+ rtlpriv->sec.key_buf
+ [entry_id]);
+ }
+ }
+ }
+}
+
+void rtl92de_suspend(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtlpriv->rtlhal.macphyctl_reg = rtl_read_byte(rtlpriv,
+ REG_MAC_PHY_CTRL_NORMAL);
+}
+
+void rtl92de_resume(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtl_write_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL,
+ rtlpriv->rtlhal.macphyctl_reg);
+}
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff