USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.

'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0f) created a regression
with Beagleboard xM if booting the kernel after running 'usb start' under u-boot.

Finishing the reset before calling 'usb_add_hcd' fixes the regression. This is most likely due to
usb_add_hcd calling the driver's reset and init functions which expect the hardware to be
up and running.

Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: stable <stable@vger.kernel.org> [3.4]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 5c78f9e71466ef7a81df23535ead8927dd73af24..e669c6a7e91e32b5affcbfaaf10cc78b9b619467 100644 (file)
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -242,15 +242,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
        ehci_reset(omap_ehci);
 
-       ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
-       if (ret) {
-               dev_err(dev, "failed to add hcd with err %d\n", ret);
-               goto err_add_hcd;
-       }
-
-       /* root ports should always stay powered */
-       ehci_port_power(omap_ehci, 1);
-
        if (pdata->phy_reset) {
                /* Hold the PHY in RESET for enough time till
                 * PHY is settled and ready
@@ -264,6 +255,15 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
                        gpio_set_value(pdata->reset_gpio_port[1], 1);
        }
 
+       ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+       if (ret) {
+               dev_err(dev, "failed to add hcd with err %d\n", ret);
+               goto err_add_hcd;
+       }
+
+       /* root ports should always stay powered */
+       ehci_port_power(omap_ehci, 1);
+
        return 0;
 
 err_add_hcd: