regulator: add LM363X driver
authorMilo Kim <milo.kim@ti.com>
Thu, 26 Nov 2015 06:57:05 +0000 (15:57 +0900)
committerMark Brown <broonie@kernel.org>
Fri, 27 Nov 2015 12:37:26 +0000 (12:37 +0000)
LM363X regulator driver supports LM3631 and LM3632.
LM3631 has 5 regulators. LM3632 provides 3 regulators.
One boost output and LDOs are used for the display module.
Boost voltage is configurable but always on.
Supported operations for LDOs are enabled/disabled and voltage change.

Two LDOs of LM3632 can be controlled by external pins.
Those are configured through the DT properties.

Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/Kconfig
drivers/regulator/Makefile
drivers/regulator/lm363x-regulator.c [new file with mode: 0644]

index 8df0b0e62976d460c96a0be4dffbe53363586b4a..ca8f46579f0107b21387c8fd9d3275c843120f71 100644 (file)
@@ -274,6 +274,15 @@ config REGULATOR_ISL6271A
        help
          This driver supports ISL6271A voltage regulator chip.
 
+config REGULATOR_LM363X
+       tristate "TI LM363X voltage regulators"
+       depends on MFD_TI_LMU
+       help
+         This driver supports LM3631 and LM3632 voltage regulators for
+         the LCD bias.
+         One boost output voltage is configurable and always on.
+         Other LDOs are used for the display module.
+
 config REGULATOR_LP3971
        tristate "National Semiconductors LP3971 PMIC regulator driver"
        depends on I2C
index 0f8174913c17bd0b23fb434af7e0a48206680e85..0ea87cdd389caa638dc68e652f82b313a7e855d2 100644 (file)
@@ -36,6 +36,7 @@ obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
+obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
 obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
new file mode 100644 (file)
index 0000000..e1b683e
--- /dev/null
@@ -0,0 +1,309 @@
+/*
+ * TI LM363X Regulator Driver
+ *
+ * Copyright 2015 Texas Instruments
+ *
+ * Author: Milo Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/mfd/ti-lmu.h>
+#include <linux/mfd/ti-lmu-register.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+/* LM3631 */
+#define LM3631_BOOST_VSEL_MAX          0x25
+#define LM3631_LDO_VSEL_MAX            0x28
+#define LM3631_CONT_VSEL_MAX           0x03
+#define LM3631_VBOOST_MIN              4500000
+#define LM3631_VCONT_MIN               1800000
+#define LM3631_VLDO_MIN                        4000000
+#define ENABLE_TIME_USEC               1000
+
+/* LM3632 */
+#define LM3632_BOOST_VSEL_MAX          0x26
+#define LM3632_LDO_VSEL_MAX            0x29
+#define LM3632_VBOOST_MIN              4500000
+#define LM3632_VLDO_MIN                        4000000
+
+/* Common */
+#define LM363X_STEP_50mV               50000
+#define LM363X_STEP_500mV              500000
+
+struct lm363x_regulator {
+       struct regmap *regmap;
+       struct regulator_dev *regulator;
+};
+
+const int ldo_cont_enable_time[] = {
+       0, 2000, 5000, 10000, 20000, 50000, 100000, 200000,
+};
+
+static int lm363x_regulator_enable_time(struct regulator_dev *rdev)
+{
+       struct lm363x_regulator *lm363x_regulator = rdev_get_drvdata(rdev);
+       enum lm363x_regulator_id id = rdev_get_id(rdev);
+       u8 val, addr, mask;
+
+       switch (id) {
+       case LM3631_LDO_CONT:
+               addr = LM3631_REG_ENTIME_VCONT;
+               mask = LM3631_ENTIME_CONT_MASK;
+               break;
+       case LM3631_LDO_OREF:
+               addr = LM3631_REG_ENTIME_VOREF;
+               mask = LM3631_ENTIME_MASK;
+               break;
+       case LM3631_LDO_POS:
+               addr = LM3631_REG_ENTIME_VPOS;
+               mask = LM3631_ENTIME_MASK;
+               break;
+       case LM3631_LDO_NEG:
+               addr = LM3631_REG_ENTIME_VNEG;
+               mask = LM3631_ENTIME_MASK;
+               break;
+       default:
+               return 0;
+       }
+
+       if (regmap_read(lm363x_regulator->regmap, addr, (unsigned int *)&val))
+               return -EINVAL;
+
+       val = (val & mask) >> LM3631_ENTIME_SHIFT;
+
+       if (id == LM3631_LDO_CONT)
+               return ldo_cont_enable_time[val];
+       else
+               return ENABLE_TIME_USEC * val;
+}
+
+static struct regulator_ops lm363x_boost_voltage_table_ops = {
+       .list_voltage     = regulator_list_voltage_linear,
+       .set_voltage_sel  = regulator_set_voltage_sel_regmap,
+       .get_voltage_sel  = regulator_get_voltage_sel_regmap,
+};
+
+static struct regulator_ops lm363x_regulator_voltage_table_ops = {
+       .list_voltage     = regulator_list_voltage_linear,
+       .set_voltage_sel  = regulator_set_voltage_sel_regmap,
+       .get_voltage_sel  = regulator_get_voltage_sel_regmap,
+       .enable           = regulator_enable_regmap,
+       .disable          = regulator_disable_regmap,
+       .is_enabled       = regulator_is_enabled_regmap,
+       .enable_time      = lm363x_regulator_enable_time,
+};
+
+static const struct regulator_desc lm363x_regulator_desc[] = {
+       /* LM3631 */
+       {
+               .name           = "vboost",
+               .of_match       = "vboost",
+               .id             = LM3631_BOOST,
+               .ops            = &lm363x_boost_voltage_table_ops,
+               .n_voltages     = LM3631_BOOST_VSEL_MAX + 1,
+               .min_uV         = LM3631_VBOOST_MIN,
+               .uV_step        = LM363X_STEP_50mV,
+               .type           = REGULATOR_VOLTAGE,
+               .owner          = THIS_MODULE,
+               .vsel_reg       = LM3631_REG_VOUT_BOOST,
+               .vsel_mask      = LM3631_VOUT_MASK,
+       },
+       {
+               .name           = "ldo_cont",
+               .of_match       = "vcont",
+               .id             = LM3631_LDO_CONT,
+               .ops            = &lm363x_regulator_voltage_table_ops,
+               .n_voltages     = LM3631_CONT_VSEL_MAX + 1,
+               .min_uV         = LM3631_VCONT_MIN,
+               .uV_step        = LM363X_STEP_500mV,
+               .type           = REGULATOR_VOLTAGE,
+               .owner          = THIS_MODULE,
+               .vsel_reg       = LM3631_REG_VOUT_CONT,
+               .vsel_mask      = LM3631_VOUT_CONT_MASK,
+               .enable_reg     = LM3631_REG_LDO_CTRL2,
+               .enable_mask    = LM3631_EN_CONT_MASK,
+       },
+       {
+               .name           = "ldo_oref",
+               .of_match       = "voref",
+               .id             = LM3631_LDO_OREF,
+               .ops            = &lm363x_regulator_voltage_table_ops,
+               .n_voltages     = LM3631_LDO_VSEL_MAX + 1,
+               .min_uV         = LM3631_VLDO_MIN,
+               .uV_step        = LM363X_STEP_50mV,
+               .type           = REGULATOR_VOLTAGE,
+               .owner          = THIS_MODULE,
+               .vsel_reg       = LM3631_REG_VOUT_OREF,
+               .vsel_mask      = LM3631_VOUT_MASK,
+               .enable_reg     = LM3631_REG_LDO_CTRL1,
+               .enable_mask    = LM3631_EN_OREF_MASK,
+       },
+       {
+               .name           = "ldo_vpos",
+               .of_match       = "vpos",
+               .id             = LM3631_LDO_POS,
+               .ops            = &lm363x_regulator_voltage_table_ops,
+               .n_voltages     = LM3631_LDO_VSEL_MAX + 1,
+               .min_uV         = LM3631_VLDO_MIN,
+               .uV_step        = LM363X_STEP_50mV,
+               .type           = REGULATOR_VOLTAGE,
+               .owner          = THIS_MODULE,
+               .vsel_reg       = LM3631_REG_VOUT_POS,
+               .vsel_mask      = LM3631_VOUT_MASK,
+               .enable_reg     = LM3631_REG_LDO_CTRL1,
+               .enable_mask    = LM3631_EN_VPOS_MASK,
+       },
+       {
+               .name           = "ldo_vneg",
+               .of_match       = "vneg",
+               .id             = LM3631_LDO_NEG,
+               .ops            = &lm363x_regulator_voltage_table_ops,
+               .n_voltages     = LM3631_LDO_VSEL_MAX + 1,
+               .min_uV         = LM3631_VLDO_MIN,
+               .uV_step        = LM363X_STEP_50mV,
+               .type           = REGULATOR_VOLTAGE,
+               .owner          = THIS_MODULE,
+               .vsel_reg       = LM3631_REG_VOUT_NEG,
+               .vsel_mask      = LM3631_VOUT_MASK,
+               .enable_reg     = LM3631_REG_LDO_CTRL1,
+               .enable_mask    = LM3631_EN_VNEG_MASK,
+       },
+       /* LM3632 */
+       {
+               .name           = "vboost",
+               .of_match       = "vboost",
+               .id             = LM3632_BOOST,
+               .ops            = &lm363x_boost_voltage_table_ops,
+               .n_voltages     = LM3632_BOOST_VSEL_MAX + 1,
+               .min_uV         = LM3632_VBOOST_MIN,
+               .uV_step        = LM363X_STEP_50mV,
+               .type           = REGULATOR_VOLTAGE,
+               .owner          = THIS_MODULE,
+               .vsel_reg       = LM3632_REG_VOUT_BOOST,
+               .vsel_mask      = LM3632_VOUT_MASK,
+       },
+       {
+               .name           = "ldo_vpos",
+               .of_match       = "vpos",
+               .id             = LM3632_LDO_POS,
+               .ops            = &lm363x_regulator_voltage_table_ops,
+               .n_voltages     = LM3632_LDO_VSEL_MAX + 1,
+               .min_uV         = LM3632_VLDO_MIN,
+               .uV_step        = LM363X_STEP_50mV,
+               .type           = REGULATOR_VOLTAGE,
+               .owner          = THIS_MODULE,
+               .vsel_reg       = LM3632_REG_VOUT_POS,
+               .vsel_mask      = LM3632_VOUT_MASK,
+               .enable_reg     = LM3632_REG_BIAS_CONFIG,
+               .enable_mask    = LM3632_EN_VPOS_MASK,
+       },
+       {
+               .name           = "ldo_vneg",
+               .of_match       = "vneg",
+               .id             = LM3632_LDO_NEG,
+               .ops            = &lm363x_regulator_voltage_table_ops,
+               .n_voltages     = LM3632_LDO_VSEL_MAX + 1,
+               .min_uV         = LM3632_VLDO_MIN,
+               .uV_step        = LM363X_STEP_50mV,
+               .type           = REGULATOR_VOLTAGE,
+               .owner          = THIS_MODULE,
+               .vsel_reg       = LM3632_REG_VOUT_NEG,
+               .vsel_mask      = LM3632_VOUT_MASK,
+               .enable_reg     = LM3632_REG_BIAS_CONFIG,
+               .enable_mask    = LM3632_EN_VNEG_MASK,
+       },
+};
+
+static int lm363x_regulator_of_get_enable_gpio(struct device_node *np, int id)
+{
+       /*
+        * Check LCM_EN1/2_GPIO is configured.
+        * Those pins are used for enabling VPOS/VNEG LDOs.
+        */
+       switch (id) {
+       case LM3632_LDO_POS:
+               return of_get_named_gpio(np, "ti,lcm-en1-gpio", 0);
+       case LM3632_LDO_NEG:
+               return of_get_named_gpio(np, "ti,lcm-en2-gpio", 0);
+       default:
+               return -EINVAL;
+       }
+}
+
+static int lm363x_regulator_probe(struct platform_device *pdev)
+{
+       struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent);
+       struct lm363x_regulator *lm363x_regulator;
+       struct regmap *regmap = lmu->regmap;
+       struct regulator_config cfg = { };
+       struct regulator_dev *rdev;
+       struct device *dev = &pdev->dev;
+       int id = pdev->id;
+       int ret, ena_gpio;
+
+       lm363x_regulator = devm_kzalloc(dev, sizeof(*lm363x_regulator),
+                                       GFP_KERNEL);
+       if (!lm363x_regulator)
+               return -ENOMEM;
+
+       lm363x_regulator->regmap = regmap;
+
+       cfg.dev = dev;
+       cfg.driver_data = lm363x_regulator;
+       cfg.regmap = regmap;
+
+       /*
+        * LM3632 LDOs can be controlled by external pin.
+        * Register update is required if the pin is used.
+        */
+       ena_gpio = lm363x_regulator_of_get_enable_gpio(dev->of_node, id);
+       if (gpio_is_valid(ena_gpio)) {
+               cfg.ena_gpio = ena_gpio;
+               cfg.ena_gpio_flags = GPIOF_OUT_INIT_LOW;
+
+               ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG,
+                                        LM3632_EXT_EN_MASK,
+                                        LM3632_EXT_EN_MASK);
+               if (ret) {
+                       dev_err(dev, "External pin err: %d\n", ret);
+                       return ret;
+               }
+       }
+
+       rdev = devm_regulator_register(dev, &lm363x_regulator_desc[id], &cfg);
+       if (IS_ERR(rdev)) {
+               ret = PTR_ERR(rdev);
+               dev_err(dev, "[%d] regulator register err: %d\n", id, ret);
+               return ret;
+       }
+
+       lm363x_regulator->regulator = rdev;
+       platform_set_drvdata(pdev, lm363x_regulator);
+
+       return 0;
+}
+
+static struct platform_driver lm363x_regulator_driver = {
+       .probe = lm363x_regulator_probe,
+       .driver = {
+               .name = "lm363x-regulator",
+       },
+};
+
+module_platform_driver(lm363x_regulator_driver);
+
+MODULE_DESCRIPTION("TI LM363X Regulator Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:lm363x-regulator");