if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
if (hwif->dma_ops->dma_end(drive) ||
- (drive->media == ide_tape && !scsi && (stat & ERR_STAT))) {
+ (drive->media == ide_tape && !scsi && (stat & ATA_ERR))) {
if (drive->media == ide_floppy && !scsi)
printk(KERN_ERR "%s: DMA %s error\n",
drive->name, rq_data_dir(pc->rq)
}
/* No more interrupts */
- if ((stat & DRQ_STAT) == 0) {
+ if ((stat & ATA_DRQ) == 0) {
debug_log("Packet command completed, %d bytes transferred\n",
pc->xferred);
local_irq_enable_in_hardirq();
if (drive->media == ide_tape && !scsi &&
- (stat & ERR_STAT) && rq->cmd[0] == REQUEST_SENSE)
- stat &= ~ERR_STAT;
+ (stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE)
+ stat &= ~ATA_ERR;
- if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
+ if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) {
/* Error detected */
debug_log("%s: I/O error\n", drive->name);
cmd_finished:
pc->error = 0;
if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
- (stat & SEEK_STAT) == 0) {
+ (stat & ATA_DSC) == 0) {
dsc_handle(drive);
return ide_stopped;
}
/* Get the number of bytes to transfer on this interrupt. */
ide_read_bcount_and_ireason(drive, &bcount, &ireason);
- if (ireason & CD) {
+ if (ireason & ATAPI_COD) {
printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
return ide_do_reset(drive);
}
- if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
+ if (((ireason & ATAPI_IO) == ATAPI_IO) ==
+ !!(pc->flags & PC_FLAG_WRITING)) {
/* Hopefully, we will never get here */
printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
"to %s!\n", drive->name,
- (ireason & IO) ? "Write" : "Read",
- (ireason & IO) ? "Read" : "Write");
+ (ireason & ATAPI_IO) ? "Write" : "Read",
+ (ireason & ATAPI_IO) ? "Read" : "Write");
return ide_do_reset(drive);
}
{
int retries = 100;
- while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) {
+ while (retries-- && ((ireason & ATAPI_COD) == 0 ||
+ (ireason & ATAPI_IO))) {
printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
"a packet command, retrying\n", drive->name);
udelay(100);
printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
"a packet command, ignoring\n",
drive->name);
- ireason |= CD;
- ireason &= ~IO;
+ ireason |= ATAPI_COD;
+ ireason &= ~ATAPI_IO;
}
}
ide_startstop_t startstop;
u8 ireason;
- if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+ if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
printk(KERN_ERR "%s: Strange, packet command initiated yet "
"DRQ isn't asserted\n", drive->name);
return startstop;
if (drive->media == ide_tape && !drive->scsi)
ireason = ide_wait_ireason(drive, ireason);
- if ((ireason & CD) == 0 || (ireason & IO)) {
+ if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
"a packet command\n", drive->name);
return ide_do_reset(drive);
ide_dump_status_no_sense(drive, "media error (blank)",
stat);
do_end_request = 1;
- } else if ((err & ~ABRT_ERR) != 0) {
+ } else if ((err & ~ATA_ABORTED) != 0) {
/* go to the default handler for other errors */
ide_error(drive, "cdrom_decode_status", stat);
return 1;
* If we got a CHECK_CONDITION status, queue
* a request sense command.
*/
- if (stat & ERR_STAT)
+ if (stat & ATA_ERR)
cdrom_queue_request_sense(drive, NULL, NULL);
} else {
blk_dump_rq_flags(rq, "ide-cd: bad rq");
return 1;
end_request:
- if (stat & ERR_STAT) {
+ if (stat & ATA_ERR) {
unsigned long flags;
spin_lock_irqsave(&ide_lock, flags);
*/
/* check for errors */
- if (cdrom_decode_status(drive, DRQ_STAT, NULL))
+ if (cdrom_decode_status(drive, ATA_DRQ, NULL))
return ide_stopped;
/* ok, next interrupt will be DMA interrupt */
drive->waiting_for_dma = 1;
} else {
/* otherwise, we must wait for DRQ to get set */
- if (ide_wait_stat(&startstop, drive, DRQ_STAT,
- BUSY_STAT, WAIT_READY))
+ if (ide_wait_stat(&startstop, drive, ATA_DRQ,
+ ATA_BUSY, WAIT_READY))
return startstop;
}
thislen = len;
/* If DRQ is clear, the command has completed. */
- if ((stat & DRQ_STAT) == 0) {
+ if ((stat & ATA_DRQ) == 0) {
if (blk_fs_request(rq)) {
/*
* If we're not done reading/writing, complain.
unsigned long elapsed = jiffies - info->start_seek;
int stat = hwif->tp_ops->read_status(hwif);
- if ((stat & SEEK_STAT) != SEEK_STAT) {
+ if ((stat & ATA_DSC) != ATA_DSC) {
if (elapsed < IDECD_SEEK_TIMEOUT) {
ide_stall_queue(drive,
IDECD_SEEK_TIMER);
dma_stat = hwif->dma_ops->dma_end(drive);
stat = hwif->tp_ops->read_status(hwif);
- if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
+ if (OK_STAT(stat, DRIVE_READY, drive->bad_wstat | ATA_DRQ)) {
if (!dma_stat) {
struct request *rq = HWGROUP(drive)->rq;
stat = hwif->tp_ops->read_status(hwif);
local_irq_restore(flags);
- progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000;
+ progress_indication = ((stat & ATA_DSC) == 0) ? 0 : 0x10000;
}
if (put_user(progress_indication, arg))
return (-EFAULT);
ide_task_t *task = (ide_task_t *)rq->special;
if (rq->errors == 0)
- rq->errors = !OK_STAT(stat, READY_STAT, BAD_STAT);
+ rq->errors = !OK_STAT(stat, ATA_DRDY, BAD_STAT);
if (task) {
struct ide_taskfile *tf = &task->tf;
{
ide_hwif_t *hwif = drive->hwif;
- if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
- } else if (stat & ERR_STAT) {
+ } else if (stat & ATA_ERR) {
/* err has different meaning on cdrom and tape */
- if (err == ABRT_ERR) {
+ if (err == ATA_ABORTED) {
if (drive->select.b.lba &&
/* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
} else if ((err & BAD_CRC) == BAD_CRC) {
/* UDMA crc error, just retry the operation */
drive->crc_count++;
- } else if (err & (BBD_ERR | ECC_ERR)) {
+ } else if (err & (ATA_BBK | ATA_UNC)) {
/* retries won't help these */
rq->errors = ERROR_MAX;
- } else if (err & TRK0_ERR) {
+ } else if (err & ATA_TRK0NF) {
/* help it find track zero */
rq->errors |= ERROR_RECAL;
}
}
- if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ &&
+ if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ &&
(hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) {
int nsect = drive->mult_count ? drive->mult_count : 1;
return ide_stopped;
}
- if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+ if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
rq->errors |= ERROR_RESET;
if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
{
ide_hwif_t *hwif = drive->hwif;
- if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else {
/* add decoding error stuff */
}
- if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+ if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
/* force an abort */
hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE);
ide_check_pm_state(drive, rq);
SELECT_DRIVE(drive);
- if (ide_wait_stat(&startstop, drive, drive->ready_stat, BUSY_STAT|DRQ_STAT, WAIT_READY)) {
+ if (ide_wait_stat(&startstop, drive, drive->ready_stat,
+ ATA_BUSY | ATA_DRQ, WAIT_READY)) {
printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
return startstop;
}
if (hwif->irq == irq) {
stat = hwif->tp_ops->read_status(hwif);
- if (!OK_STAT(stat, READY_STAT, BAD_STAT)) {
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
/* Try to not flood the console with msgs */
static unsigned long last_msgtime, count;
++count;
/* Note: this may clear a pending IRQ!! */
stat = hwif->tp_ops->read_status(hwif);
- if (stat & BUSY_STAT)
+ if (stat & ATA_BUSY)
/* drive busy: definitely not interrupting */
return 0;
udelay(1); /* spec allows drive 400ns to assert "BUSY" */
stat = tp_ops->read_status(hwif);
- if (stat & BUSY_STAT) {
+ if (stat & ATA_BUSY) {
local_irq_set(flags);
timeout += jiffies;
- while ((stat = tp_ops->read_status(hwif)) & BUSY_STAT) {
+ while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) {
if (time_after(jiffies, timeout)) {
/*
* One last read after the timeout in case
* progress during the timeout..
*/
stat = tp_ops->read_status(hwif);
- if (!(stat & BUSY_STAT))
+ if ((stat & ATA_BUSY) == 0)
break;
local_irq_restore(flags);
msleep(50); /* give drive a breather */
stat = tp_ops->read_altstatus(hwif);
- } while (stat & BUSY_STAT);
+ } while (stat & ATA_BUSY);
- msleep(50); /* wait for IRQ and DRQ_STAT */
+ msleep(50); /* wait for IRQ and ATA_DRQ */
stat = tp_ops->read_status(hwif);
- if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) {
+ if (!OK_STAT(stat, ATA_DRQ, BAD_R_STAT)) {
SELECT_MASK(drive, 0);
printk("%s: CHECK for good STATUS\n", drive->name);
return 0;
tp_ops->set_irq(hwif, 1);
error = __ide_wait_stat(drive, drive->ready_stat,
- BUSY_STAT|DRQ_STAT|ERR_STAT,
+ ATA_BUSY | ATA_DRQ | ATA_ERR,
WAIT_CMD, &stat);
SELECT_MASK(drive, 0);
udelay (10);
stat = hwif->tp_ops->read_status(hwif);
- if (OK_STAT(stat, 0, BUSY_STAT))
+ if (OK_STAT(stat, 0, ATA_BUSY))
printk("%s: ATAPI reset complete\n", drive->name);
else {
if (time_before(jiffies, hwgroup->poll_timeout)) {
tmp = hwif->tp_ops->read_status(hwif);
- if (!OK_STAT(tmp, 0, BUSY_STAT)) {
+ if (!OK_STAT(tmp, 0, ATA_BUSY)) {
if (time_before(jiffies, hwgroup->poll_timeout)) {
ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
/* continue polling */
*/
mdelay(1);
stat = hwif->tp_ops->read_status(hwif);
- if ((stat & BUSY_STAT) == 0)
+ if ((stat & ATA_BUSY) == 0)
return 0;
/*
* Assume a value of 0xff means nothing is connected to
static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
{
printk("{ ");
- if (err & ABRT_ERR) printk("DriveStatusError ");
- if (err & ICRC_ERR)
- printk((err & ABRT_ERR) ? "BadCRC " : "BadSector ");
- if (err & ECC_ERR) printk("UncorrectableError ");
- if (err & ID_ERR) printk("SectorIdNotFound ");
- if (err & TRK0_ERR) printk("TrackZeroNotFound ");
- if (err & MARK_ERR) printk("AddrMarkNotFound ");
+ if (err & ATA_ABORTED) printk("DriveStatusError ");
+ if (err & ATA_ICRC)
+ printk((err & ATA_ABORTED) ? "BadCRC " : "BadSector ");
+ if (err & ATA_UNC) printk("UncorrectableError ");
+ if (err & ATA_IDNF) printk("SectorIdNotFound ");
+ if (err & ATA_TRK0NF) printk("TrackZeroNotFound ");
+ if (err & ATA_AMNF) printk("AddrMarkNotFound ");
printk("}");
- if ((err & (BBD_ERR | ABRT_ERR)) == BBD_ERR ||
- (err & (ECC_ERR|ID_ERR|MARK_ERR))) {
+ if ((err & (ATA_BBK | ATA_ABORTED)) == ATA_BBK ||
+ (err & (ATA_UNC | ATA_IDNF | ATA_AMNF))) {
ide_dump_sector(drive);
if (HWGROUP(drive) && HWGROUP(drive)->rq)
printk(", sector=%llu",
static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
{
printk("{ ");
- if (err & ILI_ERR) printk("IllegalLengthIndication ");
- if (err & EOM_ERR) printk("EndOfMedia ");
- if (err & ABRT_ERR) printk("AbortedCommand ");
- if (err & MCR_ERR) printk("MediaChangeRequested ");
- if (err & LFS_ERR) printk("LastFailedSense=0x%02x ",
- (err & LFS_ERR) >> 4);
+ if (err & ATAPI_ILI) printk("IllegalLengthIndication ");
+ if (err & ATAPI_EOM) printk("EndOfMedia ");
+ if (err & ATA_ABORTED) printk("AbortedCommand ");
+ if (err & ATA_MCR) printk("MediaChangeRequested ");
+ if (err & ATAPI_LFS) printk("LastFailedSense=0x%02x ",
+ (err & ATAPI_LFS) >> 4);
printk("}\n");
}
local_irq_save(flags);
printk("%s: %s: status=0x%02x { ", drive->name, msg, stat);
- if (stat & BUSY_STAT)
+ if (stat & ATA_BUSY)
printk("Busy ");
else {
- if (stat & READY_STAT) printk("DriveReady ");
- if (stat & WRERR_STAT) printk("DeviceFault ");
- if (stat & SEEK_STAT) printk("SeekComplete ");
- if (stat & DRQ_STAT) printk("DataRequest ");
- if (stat & ECC_STAT) printk("CorrectedError ");
- if (stat & INDEX_STAT) printk("Index ");
- if (stat & ERR_STAT) printk("Error ");
+ if (stat & ATA_DRDY) printk("DriveReady ");
+ if (stat & ATA_DF) printk("DeviceFault ");
+ if (stat & ATA_DSC) printk("SeekComplete ");
+ if (stat & ATA_DRQ) printk("DataRequest ");
+ if (stat & ATA_CORR) printk("CorrectedError ");
+ if (stat & ATA_IDX) printk("Index ");
+ if (stat & ATA_ERR) printk("Error ");
}
printk("}\n");
- if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) {
+ if ((stat & (ATA_BUSY | ATA_ERR)) == ATA_ERR) {
err = ide_read_error(drive);
printk("%s: %s: error=0x%02x ", drive->name, msg, err);
if (drive->media == ide_disk)
if (io_ports->ctl_addr) {
a = tp_ops->read_altstatus(hwif);
s = tp_ops->read_status(hwif);
- if ((a ^ s) & ~INDEX_STAT)
+ if ((a ^ s) & ~ATA_IDX)
/* ancient Seagate drives, broken interfaces */
printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
"instead of ALTSTATUS(0x%02x)\n",
msleep(50);
s = use_altstatus ? tp_ops->read_altstatus(hwif)
: tp_ops->read_status(hwif);
- } while (s & BUSY_STAT);
+ } while (s & ATA_BUSY);
- /* wait for IRQ and DRQ_STAT */
+ /* wait for IRQ and ATA_DRQ */
msleep(50);
s = tp_ops->read_status(hwif);
- if (OK_STAT(s, DRQ_STAT, BAD_R_STAT)) {
+ if (OK_STAT(s, ATA_DRQ, BAD_R_STAT)) {
unsigned long flags;
/* local CPU only; some systems need this */
do {
msleep(50);
stat = hwif->tp_ops->read_status(hwif);
- if ((stat & BUSY_STAT) == 0)
+ if ((stat & ATA_BUSY) == 0)
return 0;
} while (time_before(jiffies, timeout));
if (drive->select.b.unit != 0) {
/* exit with drive0 selected */
SELECT_DRIVE(&hwif->drives[0]);
- /* allow BUSY_STAT to assert & clear */
+ /* allow ATA_BUSY to assert & clear */
msleep(50);
}
/* no i/f present: mmm.. this should be a 4 -ml */
stat = tp_ops->read_status(hwif);
- if (OK_STAT(stat, READY_STAT, BUSY_STAT) ||
+ if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) ||
drive->present || cmd == ATA_CMD_ID_ATAPI) {
/* send cmd and wait */
if ((rc = try_to_identify(drive, cmd))) {
stat = tp_ops->read_status(hwif);
- if (stat == (BUSY_STAT | READY_STAT))
+ if (stat == (ATA_BUSY | ATA_DRDY))
return 4;
if (rc == 1 && cmd == ATA_CMD_ID_ATAPI) {
stat = hwif->tp_ops->read_status(hwif);
- if (stat & SEEK_STAT) {
- if (stat & ERR_STAT) {
+ if (stat & ATA_DSC) {
+ if (stat & ATA_ERR) {
/* Error detected */
if (pc->c[0] != TEST_UNIT_READY)
printk(KERN_ERR "ide-tape: %s: I/O error, ",
}
if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
- (stat & SEEK_STAT) == 0) {
+ (stat & ATA_DSC) == 0) {
if (postponed_rq == NULL) {
tape->dsc_polling_start = jiffies;
tape->dsc_poll_freq = tape->best_dsc_rw_freq;
local_irq_enable_in_hardirq();
stat = hwif->tp_ops->read_status(hwif);
- if (OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (OK_STAT(stat, ATA_DRDY, BAD_STAT))
drive->mult_count = drive->mult_req;
else {
drive->mult_req = drive->mult_count = 0;
while (1) {
stat = hwif->tp_ops->read_status(hwif);
- if ((stat & BUSY_STAT) == 0 || retries-- == 0)
+ if ((stat & ATA_BUSY) == 0 || retries-- == 0)
break;
udelay(10);
};
- if (OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (OK_STAT(stat, ATA_DRDY, BAD_STAT))
return ide_stopped;
- if (stat & (ERR_STAT|DRQ_STAT))
+ if (stat & (ATA_ERR | ATA_DRQ))
return ide_error(drive, "set_geometry_intr", stat);
ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL);
local_irq_enable_in_hardirq();
stat = hwif->tp_ops->read_status(hwif);
- if (!OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT))
return ide_error(drive, "recal_intr", stat);
return ide_stopped;
}
local_irq_enable_in_hardirq();
stat = hwif->tp_ops->read_status(hwif);
- if (!OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT))
return ide_error(drive, "task_no_data_intr", stat);
/* calls ide_end_drive_cmd */
for (retries = 0; retries < 1000; retries++) {
stat = hwif->tp_ops->read_status(hwif);
- if (stat & BUSY_STAT)
+ if (stat & ATA_BUSY)
udelay(10);
else
break;
}
- if (stat & BUSY_STAT)
+ if (stat & ATA_BUSY)
printk(KERN_ERR "%s: drive still BUSY!\n", drive->name);
return stat;
static ide_startstop_t task_in_unexpected(ide_drive_t *drive, struct request *rq, u8 stat)
{
/* Command all done? */
- if (OK_STAT(stat, READY_STAT, BUSY_STAT)) {
+ if (OK_STAT(stat, ATA_DRDY, ATA_BUSY)) {
task_end_request(drive, rq, stat);
return ide_stopped;
}
u8 stat = hwif->tp_ops->read_status(hwif);
/* Error? */
- if (stat & ERR_STAT)
+ if (stat & ATA_ERR)
return task_error(drive, rq, __func__, stat);
/* Didn't want any data? Odd. */
- if (!(stat & DRQ_STAT))
+ if ((stat & ATA_DRQ) == 0)
return task_in_unexpected(drive, rq, stat);
ide_pio_datablock(drive, rq, 0);
return task_error(drive, rq, __func__, stat);
/* Deal with unexpected ATA data phase. */
- if (((stat & DRQ_STAT) == 0) ^ !hwif->nleft)
+ if (((stat & ATA_DRQ) == 0) ^ !hwif->nleft)
return task_error(drive, rq, __func__, stat);
if (!hwif->nleft) {
{
ide_startstop_t startstop;
- if (ide_wait_stat(&startstop, drive, DRQ_STAT,
+ if (ide_wait_stat(&startstop, drive, ATA_DRQ,
drive->bad_wstat, WAIT_DRQ)) {
printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n",
drive->name,
drive->media = ide_disk;
drive->select.all = (unit<<4)|0xa0;
drive->hwif = hwif;
- drive->ready_stat = READY_STAT;
+ drive->ready_stat = ATA_DRDY;
drive->bad_wstat = BAD_W_STAT;
drive->special.b.recalibrate = 1;
drive->special.b.set_geometry = 1;
static unsigned int ide_nowerr;
module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0);
-MODULE_PARM_DESC(nowerr, "ignore the WRERR_STAT bit for a device");
+MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device");
static unsigned int ide_cdroms;
drive->noprobe = 1;
}
if (ide_nowerr & (1 << i)) {
- printk(KERN_INFO "ide: ignoring the WRERR_STAT bit for %s\n",
+ printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n",
drive->name);
drive->bad_wstat = BAD_R_STAT;
}
drive->cyl, drive->head, drive->sect);
drive->present = 1;
drive->media = ide_disk;
- drive->ready_stat = READY_STAT;
+ drive->ready_stat = ATA_DRDY;
}
}
do {
udelay(50);
stat = hwif->tp_ops->read_status(hwif);
- if (stat == 0xff)
- break;
- } while ((stat & BUSY_STAT) && --timeout);
+ if (stat == 0xff)
+ break;
+ } while ((stat & ATA_BUSY) && --timeout);
#endif
}
/* errata A308 workaround: Step5 (check data loss) */
/* We don't check non ide_disk because it is limited to UDMA4 */
if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
- & ERR_STAT) &&
+ & ATA_ERR) &&
drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
reg = in_be32((void __iomem *)intsts_port);
if (!(reg & INTSTS_ACTEINT)) {
/* SCC errata A252,A308 workaround: Step4 */
if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
- & ERR_STAT) &&
+ & ATA_ERR) &&
(int_stat & INTSTS_INTRQ))
return 1;
{
ide_hwif_t *hwif = drive->hwif;
- if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+ if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
/* force an abort */
hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE);
};
#define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
-#define BAD_R_STAT (BUSY_STAT | ERR_STAT)
-#define BAD_W_STAT (BAD_R_STAT | WRERR_STAT)
-#define BAD_STAT (BAD_R_STAT | DRQ_STAT)
-#define DRIVE_READY (READY_STAT | SEEK_STAT)
-#define BAD_CRC (ABRT_ERR | ICRC_ERR)
+#define BAD_R_STAT (ATA_BUSY | ATA_ERR)
+#define BAD_W_STAT (BAD_R_STAT | ATA_DF)
+#define BAD_STAT (BAD_R_STAT | ATA_DRQ)
+#define DRIVE_READY (ATA_DRDY | ATA_DSC)
+
+#define BAD_CRC (ATA_ABORTED | ATA_ICRC)
#define SATA_NR_PORTS (3) /* 16 possible ?? */
u8 mult_req; /* requested multiple sector setting */
u8 tune_req; /* requested drive tuning setting */
u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
- u8 bad_wstat; /* used for ignoring WRERR_STAT */
- u8 nowerr; /* used for ignoring WRERR_STAT */
+ u8 bad_wstat; /* used for ignoring ATA_DF */
+ u8 nowerr; /* used for ignoring ATA_DF */
u8 sect0; /* offset of first sector for DM6:DDO */
u8 head; /* "real" number of heads */
u8 sect; /* "real" sectors per track */