#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/mmc/host.h>
#include <linux/delay.h>
#include <linux/i2c/twl.h>
#include <linux/err.h>
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.ext_clock = 1,
#include <linux/regulator/machine.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
/* 8 bits (default) requires S6.3 == ON,
* so the SIM card isn't used; else 4 bits.
*/
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 4,
},
{
.mmc = 2,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 7,
},
{} /* Terminator */
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
#include <linux/i2c/at24.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.transceiver = 1,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
#include <linux/i2c/twl.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
.max_freq = 24000000,
.dma_mask = 0xffffffff,
.slots[0] = {
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.set_power = n8x0_mmc_set_power,
.set_bus_mode = n8x0_mmc_set_bus_mode,
.get_cover_state = n8x0_mmc_get_cover_state,
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */
#include <linux/smsc911x.h>
#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 63,
},
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
+#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <asm/mach-types.h>
static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 126,
.ext_clock = 0,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 127,
.ext_clock = 1,
},
{
.mmc = 3,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.init_card = pandora_wl1251_init_card,
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 23,
},
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
#include <plat/mcspi.h>
#include <linux/spi/spi.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.transceiver = true,
{
.name = "external",
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.cover_only = true,
.gpio_cd = 160,
.gpio_wp = -EINVAL,
{
.name = "internal",
.mmc = 2,
- .wires = 8, /* See also rx51_mmc2_remux */
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ /* See also rx51_mmc2_remux */
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
{
.name = "external",
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_wp = -EINVAL,
.power_saving = true,
},
{
.name = "internal",
.mmc = 2,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
omap_mux_init_signal("sdmmc_dat0", 0);
omap_mux_init_signal("sdmmc_dat_dir0", 0);
omap_mux_init_signal("sdmmc_cmd_dir", 0);
- if (mmc_controller->slots[0].wires == 4) {
+ if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
omap_mux_init_signal("sdmmc_dat1", 0);
omap_mux_init_signal("sdmmc_dat2", 0);
omap_mux_init_signal("sdmmc_dat3", 0);
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat0",
OMAP_PIN_INPUT_PULLUP);
- if (mmc_controller->slots[0].wires == 4 ||
- mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc1_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat2",
omap_mux_init_signal("sdmmc1_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc1_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat5",
* For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
* in the board-*.c files
*/
- if (mmc_controller->slots[0].wires == 4 ||
- mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc2_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat2",
omap_mux_init_signal("sdmmc2_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
"mmc%islot%i", c->mmc, 1);
mmc->slots[0].name = hc->name;
mmc->nr_slots = 1;
- mmc->slots[0].wires = c->wires;
+ mmc->slots[0].caps = c->caps;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
}
/* Omap3630 HSMMC1 supports only 4-bit */
- if (cpu_is_omap3630() && c->wires > 4) {
- c->wires = 4;
- mmc->slots[0].wires = c->wires;
+ if (cpu_is_omap3630() &&
+ (c->caps & MMC_CAP_8_BIT_DATA)) {
+ c->caps &= ~MMC_CAP_8_BIT_DATA;
+ c->caps |= MMC_CAP_4_BIT_DATA;
+ mmc->slots[0].caps = c->caps;
}
break;
case 2:
if (c->ext_clock)
c->transceiver = 1;
- if (c->transceiver && c->wires > 4)
- c->wires = 4;
+ if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
+ c->caps &= ~MMC_CAP_8_BIT_DATA;
+ c->caps |= MMC_CAP_4_BIT_DATA;
+ }
/* FALLTHROUGH */
case 3:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
struct omap2_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
- u8 wires; /* 1/4/8 wires */
+ u32 caps; /* 4/8 wires and any additional host
+ * capabilities OR'd (ref. linux/mmc/host.h) */
bool transceiver; /* MMC-2 option */
bool ext_clock; /* use external pin for input clock */
bool cover_only; /* No card detect - just cover switch */
struct omap_mmc_slot_data {
- /* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC;
- * 8 wire signaling is also optional, and is used with HSMMC
- */
- u8 wires;
+ /* 4/8 wires and any additional host capabilities
+ * need to OR'd all capabilities (ref. linux/mmc/host.h) */
+ u32 caps;
/*
* nomux means "standard" muxing is wrong on this board, and
host->slots[id] = slot;
mmc->caps = 0;
- if (host->pdata->slots[id].wires >= 4)
+ if (host->pdata->slots[id].caps & MMC_CAP_8_BIT_DATA)
mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->ops = &mmc_omap_ops;
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
- switch (mmc_slot(host).wires) {
- case 8:
- mmc->caps |= MMC_CAP_8_BIT_DATA;
- /* Fall through */
- case 4:
+ mmc->caps |= mmc_slot(host).caps;
+ if (mmc->caps & MMC_CAP_8_BIT_DATA)
mmc->caps |= MMC_CAP_4_BIT_DATA;
- break;
- case 1:
- /* Nothing to crib here */
- case 0:
- /* Assuming nothing was given by board, Core use's 1-Bit */
- break;
- default:
- /* Completely unexpected.. Core goes with 1-Bit Width */
- dev_crit(mmc_dev(host->mmc), "Invalid width %d\n used!"
- "using 1 instead\n", mmc_slot(host).wires);
- }
if (mmc_slot(host).nonremovable)
mmc->caps |= MMC_CAP_NONREMOVABLE;