#define RFCOMM_RPN_STOP_15 1
#define RFCOMM_RPN_PARITY_NONE 0x0
-#define RFCOMM_RPN_PARITY_ODD 0x4
-#define RFCOMM_RPN_PARITY_EVEN 0x5
-#define RFCOMM_RPN_PARITY_MARK 0x6
+#define RFCOMM_RPN_PARITY_ODD 0x1
+#define RFCOMM_RPN_PARITY_EVEN 0x3
+#define RFCOMM_RPN_PARITY_MARK 0x5
#define RFCOMM_RPN_PARITY_SPACE 0x7
#define RFCOMM_RPN_FLOW_NONE 0x00
#define RFCOMM_CFC_DISABLED 0
#define RFCOMM_CFC_ENABLED RFCOMM_MAX_CREDITS
+/* ---- RFCOMM SEND RPN ---- */
+int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci,
+ u8 bit_rate, u8 data_bits, u8 stop_bits,
+ u8 parity, u8 flow_ctrl_settings,
+ u8 xon_char, u8 xoff_char, u16 param_mask);
+
/* ---- RFCOMM DLCs (channels) ---- */
struct rfcomm_dlc *rfcomm_dlc_alloc(int prio);
void rfcomm_dlc_free(struct rfcomm_dlc *d);
SOFTWARE IS DISCLAIMED.
*/
-/*
- RPN support - Dirk Husemann <hud@zurich.ibm.com>
-*/
-
/*
* Bluetooth RFCOMM core.
*
#define __get_mcc_len(b) ((b & 0xfe) >> 1)
/* RPN macros */
-#define __rpn_line_settings(data, stop, parity) ((data & 0x3) | ((stop & 0x1) << 2) | ((parity & 0x3) << 3))
+#define __rpn_line_settings(data, stop, parity) ((data & 0x3) | ((stop & 0x1) << 2) | ((parity & 0x7) << 3))
#define __get_rpn_data_bits(line) ((line) & 0x3)
#define __get_rpn_stop_bits(line) (((line) >> 2) & 0x1)
-#define __get_rpn_parity(line) (((line) >> 3) & 0x3)
+#define __get_rpn_parity(line) (((line) >> 3) & 0x7)
static inline void rfcomm_schedule(uint event)
{
return rfcomm_send_frame(s, buf, ptr - buf);
}
-static int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci,
- u8 bit_rate, u8 data_bits, u8 stop_bits,
- u8 parity, u8 flow_ctrl_settings,
- u8 xon_char, u8 xoff_char, u16 param_mask)
+int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci,
+ u8 bit_rate, u8 data_bits, u8 stop_bits,
+ u8 parity, u8 flow_ctrl_settings,
+ u8 xon_char, u8 xoff_char, u16 param_mask)
{
struct rfcomm_hdr *hdr;
struct rfcomm_mcc *mcc;
u8 buf[16], *ptr = buf;
BT_DBG("%p cr %d dlci %d bit_r 0x%x data_b 0x%x stop_b 0x%x parity 0x%x"
- "flwc_s 0x%x xon_c 0x%x xoff_c 0x%x p_mask 0x%x",
- s, cr, dlci, bit_rate, data_bits, stop_bits, parity,
- flow_ctrl_settings, xon_char, xoff_char, param_mask);
+ " flwc_s 0x%x xon_c 0x%x xoff_c 0x%x p_mask 0x%x",
+ s, cr, dlci, bit_rate, data_bits, stop_bits, parity,
+ flow_ctrl_settings, xon_char, xoff_char, param_mask);
hdr = (void *) ptr; ptr += sizeof(*hdr);
hdr->addr = __addr(s->initiator, 0);
u8 xon_char = 0;
u8 xoff_char = 0;
u16 rpn_mask = RFCOMM_RPN_PM_ALL;
-
- BT_DBG("dlci %d cr %d len 0x%x bitr 0x%x line 0x%x flow 0x%x xonc 0x%x xoffc 0x%x pm 0x%x",
- dlci, cr, len, rpn->bit_rate, rpn->line_settings, rpn->flow_ctrl,
- rpn->xon_char, rpn->xoff_char, rpn->param_mask);
-
- if (!cr)
+
+ BT_DBG("dlci %d cr %d len 0x%x bitr 0x%x line 0x%x flow 0x%x xonc 0x%x xoffc 0x%x pm 0x%x",
+ dlci, cr, len, rpn->bit_rate, rpn->line_settings, rpn->flow_ctrl,
+ rpn->xon_char, rpn->xoff_char, rpn->param_mask);
+
+ if (!cr)
return 0;
-
+
if (len == 1) {
- /* request: return default setting */
+ /* This is a request, return default settings */
bit_rate = RFCOMM_RPN_BR_115200;
data_bits = RFCOMM_RPN_DATA_8;
stop_bits = RFCOMM_RPN_STOP_1;
flow_ctrl = RFCOMM_RPN_FLOW_NONE;
xon_char = RFCOMM_RPN_XON_CHAR;
xoff_char = RFCOMM_RPN_XOFF_CHAR;
-
goto rpn_out;
}
- /* check for sane values: ignore/accept bit_rate, 8 bits, 1 stop bit, no parity,
- no flow control lines, normal XON/XOFF chars */
+
+ /* Check for sane values, ignore/accept bit_rate, 8 bits, 1 stop bit,
+ * no parity, no flow control lines, normal XON/XOFF chars */
+
if (rpn->param_mask & RFCOMM_RPN_PM_BITRATE) {
bit_rate = rpn->bit_rate;
if (bit_rate != RFCOMM_RPN_BR_115200) {
rpn_mask ^= RFCOMM_RPN_PM_BITRATE;
}
}
+
if (rpn->param_mask & RFCOMM_RPN_PM_DATA) {
data_bits = __get_rpn_data_bits(rpn->line_settings);
if (data_bits != RFCOMM_RPN_DATA_8) {
rpn_mask ^= RFCOMM_RPN_PM_DATA;
}
}
+
if (rpn->param_mask & RFCOMM_RPN_PM_STOP) {
stop_bits = __get_rpn_stop_bits(rpn->line_settings);
if (stop_bits != RFCOMM_RPN_STOP_1) {
rpn_mask ^= RFCOMM_RPN_PM_STOP;
}
}
+
if (rpn->param_mask & RFCOMM_RPN_PM_PARITY) {
parity = __get_rpn_parity(rpn->line_settings);
if (parity != RFCOMM_RPN_PARITY_NONE) {
rpn_mask ^= RFCOMM_RPN_PM_PARITY;
}
}
+
if (rpn->param_mask & RFCOMM_RPN_PM_FLOW) {
flow_ctrl = rpn->flow_ctrl;
if (flow_ctrl != RFCOMM_RPN_FLOW_NONE) {
rpn_mask ^= RFCOMM_RPN_PM_FLOW;
}
}
+
if (rpn->param_mask & RFCOMM_RPN_PM_XON) {
xon_char = rpn->xon_char;
if (xon_char != RFCOMM_RPN_XON_CHAR) {
rpn_mask ^= RFCOMM_RPN_PM_XON;
}
}
+
if (rpn->param_mask & RFCOMM_RPN_PM_XOFF) {
xoff_char = rpn->xoff_char;
if (xoff_char != RFCOMM_RPN_XOFF_CHAR) {
}
rpn_out:
- rfcomm_send_rpn(s, 0, dlci,
- bit_rate, data_bits, stop_bits, parity, flow_ctrl,
- xon_char, xoff_char, rpn_mask);
+ rfcomm_send_rpn(s, 0, dlci, bit_rate, data_bits, stop_bits,
+ parity, flow_ctrl, xon_char, xoff_char, rpn_mask);
return 0;
}
u8 dlci = __get_dlci(rls->dlci);
BT_DBG("dlci %d cr %d status 0x%x", dlci, cr, rls->status);
-
+
if (!cr)
return 0;
- /* FIXME: We should probably do something with this
- information here. But for now it's sufficient just
- to reply -- Bluetooth 1.1 says it's mandatory to
- recognise and respond to RLS */
+ /* We should probably do something with this information here. But
+ * for now it's sufficient just to reply -- Bluetooth 1.1 says it's
+ * mandatory to recognise and respond to RLS */
rfcomm_send_rls(s, 0, dlci, rls->status);
BT_DBG("dlci %d cr %d v24 0x%x", dlci, cr, msc->v24_sig);
d = rfcomm_dlc_get(s, dlci);
- if (!d)
+ if (!d)
return 0;
if (cr) {
set_bit(RFCOMM_TX_THROTTLED, &d->flags);
else
clear_bit(RFCOMM_TX_THROTTLED, &d->flags);
-
+
rfcomm_dlc_lock(d);
if (d->modem_status)
d->modem_status(d, msc->v24_sig);
rfcomm_send_msc(s, 0, dlci, msc->v24_sig);
d->mscex |= RFCOMM_MSCEX_RX;
- } else
+ } else
d->mscex |= RFCOMM_MSCEX_TX;
return 0;
return -ENOIOCTLCMD;
}
-#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
static void rfcomm_tty_set_termios(struct tty_struct *tty, struct termios *old)
{
- BT_DBG("tty %p", tty);
+ struct termios *new = (struct termios *) tty->termios;
+ int old_baud_rate = tty_termios_baud_rate(old);
+ int new_baud_rate = tty_termios_baud_rate(new);
- if ((tty->termios->c_cflag == old->c_cflag) &&
- (RELEVANT_IFLAG(tty->termios->c_iflag) == RELEVANT_IFLAG(old->c_iflag)))
- return;
+ u8 baud, data_bits, stop_bits, parity, x_on, x_off;
+ u16 changes = 0;
+
+ struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data;
+
+ BT_DBG("tty %p termios %p", tty, old);
+
+ /* Handle turning off CRTSCTS */
+ if ((old->c_cflag & CRTSCTS) && !(new->c_cflag & CRTSCTS))
+ BT_DBG("Turning off CRTSCTS unsupported");
+
+ /* Parity on/off and when on, odd/even */
+ if (((old->c_cflag & PARENB) != (new->c_cflag & PARENB)) ||
+ ((old->c_cflag & PARODD) != (new->c_cflag & PARODD)) ) {
+ changes |= RFCOMM_RPN_PM_PARITY;
+ BT_DBG("Parity change detected.");
+ }
+
+ /* Mark and space parity are not supported! */
+ if (new->c_cflag & PARENB) {
+ if (new->c_cflag & PARODD) {
+ BT_DBG("Parity is ODD");
+ parity = RFCOMM_RPN_PARITY_ODD;
+ } else {
+ BT_DBG("Parity is EVEN");
+ parity = RFCOMM_RPN_PARITY_EVEN;
+ }
+ } else {
+ BT_DBG("Parity is OFF");
+ parity = RFCOMM_RPN_PARITY_NONE;
+ }
+
+ /* Setting the x_on / x_off characters */
+ if (old->c_cc[VSTOP] != new->c_cc[VSTOP]) {
+ BT_DBG("XOFF custom");
+ x_on = new->c_cc[VSTOP];
+ changes |= RFCOMM_RPN_PM_XON;
+ } else {
+ BT_DBG("XOFF default");
+ x_on = RFCOMM_RPN_XON_CHAR;
+ }
+
+ if (old->c_cc[VSTART] != new->c_cc[VSTART]) {
+ BT_DBG("XON custom");
+ x_off = new->c_cc[VSTART];
+ changes |= RFCOMM_RPN_PM_XOFF;
+ } else {
+ BT_DBG("XON default");
+ x_off = RFCOMM_RPN_XOFF_CHAR;
+ }
+
+ /* Handle setting of stop bits */
+ if ((old->c_cflag & CSTOPB) != (new->c_cflag & CSTOPB))
+ changes |= RFCOMM_RPN_PM_STOP;
+
+ /* POSIX does not support 1.5 stop bits and RFCOMM does not
+ * support 2 stop bits. So a request for 2 stop bits gets
+ * translated to 1.5 stop bits */
+ if (new->c_cflag & CSTOPB) {
+ stop_bits = RFCOMM_RPN_STOP_15;
+ } else {
+ stop_bits = RFCOMM_RPN_STOP_1;
+ }
- /* handle turning off CRTSCTS */
- if ((old->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) {
- BT_DBG("turning off CRTSCTS");
+ /* Handle number of data bits [5-8] */
+ if ((old->c_cflag & CSIZE) != (new->c_cflag & CSIZE))
+ changes |= RFCOMM_RPN_PM_DATA;
+
+ switch (new->c_cflag & CSIZE) {
+ case CS5:
+ data_bits = RFCOMM_RPN_DATA_5;
+ break;
+ case CS6:
+ data_bits = RFCOMM_RPN_DATA_6;
+ break;
+ case CS7:
+ data_bits = RFCOMM_RPN_DATA_7;
+ break;
+ case CS8:
+ data_bits = RFCOMM_RPN_DATA_8;
+ break;
+ default:
+ data_bits = RFCOMM_RPN_DATA_8;
+ break;
}
+
+ /* Handle baudrate settings */
+ if (old_baud_rate != new_baud_rate)
+ changes |= RFCOMM_RPN_PM_BITRATE;
+
+ switch (new_baud_rate) {
+ case 2400:
+ baud = RFCOMM_RPN_BR_2400;
+ break;
+ case 4800:
+ baud = RFCOMM_RPN_BR_4800;
+ break;
+ case 7200:
+ baud = RFCOMM_RPN_BR_7200;
+ break;
+ case 9600:
+ baud = RFCOMM_RPN_BR_9600;
+ break;
+ case 19200:
+ baud = RFCOMM_RPN_BR_19200;
+ break;
+ case 38400:
+ baud = RFCOMM_RPN_BR_38400;
+ break;
+ case 57600:
+ baud = RFCOMM_RPN_BR_57600;
+ break;
+ case 115200:
+ baud = RFCOMM_RPN_BR_115200;
+ break;
+ case 230400:
+ baud = RFCOMM_RPN_BR_230400;
+ break;
+ default:
+ /* 9600 is standard accordinag to the RFCOMM specification */
+ baud = RFCOMM_RPN_BR_9600;
+ break;
+
+ }
+
+ if (changes)
+ rfcomm_send_rpn(dev->dlc->session, 1, dev->dlc->dlci, baud,
+ data_bits, stop_bits, parity,
+ RFCOMM_RPN_FLOW_NONE, x_on, x_off, changes);
+
+ return;
}
static void rfcomm_tty_throttle(struct tty_struct *tty)
struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data;
BT_DBG("tty %p dev %p", tty, dev);
-
+
rfcomm_dlc_throttle(dev->dlc);
}
struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data;
BT_DBG("tty %p dev %p", tty, dev);
-
+
rfcomm_dlc_unthrottle(dev->dlc);
}
static int rfcomm_tty_tiocmset(struct tty_struct *tty, struct file *filp, unsigned int set, unsigned int clear)
{
- struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data;
- struct rfcomm_dlc *dlc = dev->dlc;
- u8 v24_sig;
+ struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data;
+ struct rfcomm_dlc *dlc = dev->dlc;
+ u8 v24_sig;
BT_DBG("tty %p dev %p set 0x%02x clear 0x%02x", tty, dev, set, clear);
- rfcomm_dlc_get_modem_status(dlc, &v24_sig);
-
- if (set & TIOCM_DSR || set & TIOCM_DTR)
- v24_sig |= RFCOMM_V24_RTC;
- if (set & TIOCM_RTS || set & TIOCM_CTS)
- v24_sig |= RFCOMM_V24_RTR;
- if (set & TIOCM_RI)
- v24_sig |= RFCOMM_V24_IC;
- if (set & TIOCM_CD)
- v24_sig |= RFCOMM_V24_DV;
-
- if (clear & TIOCM_DSR || clear & TIOCM_DTR)
- v24_sig &= ~RFCOMM_V24_RTC;
- if (clear & TIOCM_RTS || clear & TIOCM_CTS)
- v24_sig &= ~RFCOMM_V24_RTR;
- if (clear & TIOCM_RI)
- v24_sig &= ~RFCOMM_V24_IC;
- if (clear & TIOCM_CD)
- v24_sig &= ~RFCOMM_V24_DV;
-
- rfcomm_dlc_set_modem_status(dlc, v24_sig);
-
- return 0;
+ rfcomm_dlc_get_modem_status(dlc, &v24_sig);
+
+ if (set & TIOCM_DSR || set & TIOCM_DTR)
+ v24_sig |= RFCOMM_V24_RTC;
+ if (set & TIOCM_RTS || set & TIOCM_CTS)
+ v24_sig |= RFCOMM_V24_RTR;
+ if (set & TIOCM_RI)
+ v24_sig |= RFCOMM_V24_IC;
+ if (set & TIOCM_CD)
+ v24_sig |= RFCOMM_V24_DV;
+
+ if (clear & TIOCM_DSR || clear & TIOCM_DTR)
+ v24_sig &= ~RFCOMM_V24_RTC;
+ if (clear & TIOCM_RTS || clear & TIOCM_CTS)
+ v24_sig &= ~RFCOMM_V24_RTR;
+ if (clear & TIOCM_RI)
+ v24_sig &= ~RFCOMM_V24_IC;
+ if (clear & TIOCM_CD)
+ v24_sig &= ~RFCOMM_V24_DV;
+
+ rfcomm_dlc_set_modem_status(dlc, v24_sig);
+
+ return 0;
}
/* ---- TTY structure ---- */
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff