bnx2x: Removing CL73 code

This code is disabled, so removing it to avoid confusion

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 2463de8fe86277b07d8e855996eef76d67c7a93e..526072bb80874e34865a354b2d6d26720594914d 100644 (file)
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -29,7 +29,6 @@
 #include "bnx2x.h"
 
 /********************************************************/
-#define SUPPORT_CL73 0 /* Currently no */
 #define ETH_HLEN                       14
 #define ETH_OVREHEAD           (ETH_HLEN + 8)/* 8 for CRC + VLAN*/
 #define ETH_MIN_PACKET_SIZE            60
@@ -1208,62 +1207,9 @@ static void bnx2x_set_autoneg(struct link_params *params,
                              MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
                              reg_val);
 
-       /* Enable Clause 73 Aneg */
-       if ((vars->line_speed == SPEED_AUTO_NEG) &&
-           (SUPPORT_CL73)) {
-               /* Enable BAM Station Manager */
+       /* CL73 Autoneg Disabled */
+       reg_val = 0;
 
-               CL45_WR_OVER_CL22(bp, params->port,
-                                     params->phy_addr,
-                                     MDIO_REG_BANK_CL73_USERB0,
-                                     MDIO_CL73_USERB0_CL73_BAM_CTRL1,
-                                  (MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN |
-                       MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN |
-                       MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN));
-
-               /* Merge CL73 and CL37 aneg resolution */
-               CL45_RD_OVER_CL22(bp, params->port,
-                                     params->phy_addr,
-                                     MDIO_REG_BANK_CL73_USERB0,
-                                     MDIO_CL73_USERB0_CL73_BAM_CTRL3,
-                                     &reg_val);
-
-               CL45_WR_OVER_CL22(bp, params->port,
-                                     params->phy_addr,
-                       MDIO_REG_BANK_CL73_USERB0,
-                       MDIO_CL73_USERB0_CL73_BAM_CTRL3,
-                       (reg_val |
-                       MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR));
-
-               /* Set the CL73 AN speed */
-
-               CL45_RD_OVER_CL22(bp, params->port,
-                                     params->phy_addr,
-                                     MDIO_REG_BANK_CL73_IEEEB1,
-                                     MDIO_CL73_IEEEB1_AN_ADV2, &reg_val);
-               /* In the SerDes we support only the 1G.
-                  In the XGXS we support the 10G KX4
-                  but we currently do not support the KR */
-               if (vars->phy_flags & PHY_XGXS_FLAG) {
-                       DP(NETIF_MSG_LINK, "XGXS\n");
-                       /* 10G KX4 */
-                       reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4;
-               } else {
-                       DP(NETIF_MSG_LINK, "SerDes\n");
-                       /* 1000M KX */
-                       reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX;
-               }
-               CL45_WR_OVER_CL22(bp, params->port,
-                                     params->phy_addr,
-                                     MDIO_REG_BANK_CL73_IEEEB1,
-                                     MDIO_CL73_IEEEB1_AN_ADV2, reg_val);
-
-               /* CL73 Autoneg Enabled */
-               reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN;
-       } else {
-               /* CL73 Autoneg Disabled */
-               reg_val = 0;
-       }
        CL45_WR_OVER_CL22(bp, params->port,
                              params->phy_addr,
                              MDIO_REG_BANK_CL73_IEEEB0,
@@ -1396,44 +1342,25 @@ static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
 static void bnx2x_restart_autoneg(struct link_params *params)
 {
        struct bnx2x *bp = params->bp;
+       u16 mii_control;
        DP(NETIF_MSG_LINK, "bnx2x_restart_autoneg\n");
-       if (SUPPORT_CL73) {
-               /* enable and restart clause 73 aneg */
-               u16 an_ctrl;
-
-               CL45_RD_OVER_CL22(bp, params->port,
-                                     params->phy_addr,
-                                     MDIO_REG_BANK_CL73_IEEEB0,
-                                     MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
-                                 &an_ctrl);
-               CL45_WR_OVER_CL22(bp, params->port,
-                                     params->phy_addr,
-                               MDIO_REG_BANK_CL73_IEEEB0,
-                               MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
-                               (an_ctrl |
-                               MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN |
-                               MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN));
+       /* Enable and restart BAM/CL37 aneg */
 
-       } else {
-               /* Enable and restart BAM/CL37 aneg */
-               u16 mii_control;
-
-               CL45_RD_OVER_CL22(bp, params->port,
-                                     params->phy_addr,
-                                     MDIO_REG_BANK_COMBO_IEEE0,
-                                     MDIO_COMBO_IEEE0_MII_CONTROL,
-                                     &mii_control);
-               DP(NETIF_MSG_LINK,
-                        "bnx2x_restart_autoneg mii_control before = 0x%x\n",
-                        mii_control);
-               CL45_WR_OVER_CL22(bp, params->port,
-                                     params->phy_addr,
-                                     MDIO_REG_BANK_COMBO_IEEE0,
-                                     MDIO_COMBO_IEEE0_MII_CONTROL,
-                                     (mii_control |
-                               MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
-                               MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN));
-       }
+       CL45_RD_OVER_CL22(bp, params->port,
+                             params->phy_addr,
+                             MDIO_REG_BANK_COMBO_IEEE0,
+                             MDIO_COMBO_IEEE0_MII_CONTROL,
+                             &mii_control);
+       DP(NETIF_MSG_LINK,
+                "bnx2x_restart_autoneg mii_control before = 0x%x\n",
+                mii_control);
+       CL45_WR_OVER_CL22(bp, params->port,
+                             params->phy_addr,
+                             MDIO_REG_BANK_COMBO_IEEE0,
+                             MDIO_COMBO_IEEE0_MII_CONTROL,
+                             (mii_control |
+                              MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
+                              MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN));
 }
 
 static void bnx2x_initialize_sgmii_process(struct link_params *params,