usb: add support for STA2X11 host driver

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f4b627d343acdf39d1f33d20cea8da7dc6c0f27d..01bb7241d6efd53f3769d47e86d59a28c5cf9ce2 100644 (file)
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -276,6 +276,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 
        /* Serial Bus Release Number is at PCI 0x60 offset */
        pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
+       if (pdev->vendor == PCI_VENDOR_ID_STMICRO
+           && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
+               ehci->sbrn = 0x20; /* ConneXT has no sbrn register */
 
        /* Keep this around for a while just in case some EHCI
         * implementation uses legacy PCI PM support.  This test
@@ -526,6 +529,9 @@ static const struct pci_device_id pci_ids [] = { {
        /* handle any USB 2.0 EHCI controller */
        PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
        .driver_data =  (unsigned long) &ehci_pci_hc_driver,
+       }, {
+       PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
+       .driver_data = (unsigned long) &ehci_pci_hc_driver,
        },
        { /* end: all zeroes */ }
 };

diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 6109810cc2d3eba72c8eeb6ebb38eff17b93a399..1843bb68ac7ceefc73afcc2ed9f3a2f7fa8de1db 100644 (file)
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -397,6 +397,10 @@ static const struct pci_device_id pci_ids [] = { {
        /* handle any USB OHCI controller */
        PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
        .driver_data =  (unsigned long) &ohci_pci_hc_driver,
+       }, {
+       /* The device in the ConneXT I/O hub has no class reg */
+       PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
+       .driver_data =  (unsigned long) &ohci_pci_hc_driver,
        }, { /* end: all zeroes */ }
 };
 MODULE_DEVICE_TABLE (pci, pci_ids);