EDAC: Fixup scrubrate manipulation
authorBorislav Petkov <borislav.petkov@amd.com>
Wed, 24 Nov 2010 18:52:09 +0000 (19:52 +0100)
committerBorislav Petkov <borislav.petkov@amd.com>
Fri, 7 Jan 2011 10:38:31 +0000 (11:38 +0100)
Make the ->{get|set}_sdram_scrub_rate return the actual scrub rate
bandwidth it succeeded setting and remove superfluous arg pointer used
for that. A negative value returned still means that an error occurred
while setting the scrubrate. Document this for future reference.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
drivers/edac/amd64_edac.c
drivers/edac/amd64_edac.h
drivers/edac/cpc925_edac.c
drivers/edac/e752x_edac.c
drivers/edac/edac_core.h
drivers/edac/edac_mc_sysfs.c
drivers/edac/i5100_edac.c

index f621aa8beceebb11aed008b732fa512156e6374a..8c176fb8a8fb5f50432170477198b6c319885a6f 100644 (file)
@@ -77,7 +77,11 @@ static int ddr3_dbam[] = { [0]               = -1,
  *FIXME: Produce a better mapping/linearisation.
  */
 
-struct scrubrate scrubrates[] = {
+
+struct scrubrate {
+       u32 scrubval;           /* bit pattern for scrub rate */
+       u32 bandwidth;          /* bandwidth consumed (bytes/sec) */
+} scrubrates[] = {
        { 0x01, 1600000000UL},
        { 0x02, 800000000UL},
        { 0x03, 400000000UL},
@@ -151,14 +155,12 @@ static int __amd64_set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate)
        }
 
        scrubval = scrubrates[i].scrubval;
-       if (scrubval)
-               amd64_info("Setting scrub rate bandwidth: %u\n",
-                          scrubrates[i].bandwidth);
-       else
-               amd64_info("Turning scrubbing off.\n");
 
        pci_write_bits32(ctl, K8_SCRCTRL, scrubval, 0x001F);
 
+       if (scrubval)
+               return scrubrates[i].bandwidth;
+
        return 0;
 }
 
@@ -169,11 +171,11 @@ static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bw)
        return __amd64_set_scrub_rate(pvt->F3, bw, pvt->min_scrubrate);
 }
 
-static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+static int amd64_get_scrub_rate(struct mem_ctl_info *mci)
 {
        struct amd64_pvt *pvt = mci->pvt_info;
        u32 scrubval = 0;
-       int status = -1, i;
+       int i, retval = -EINVAL;
 
        amd64_read_pci_cfg(pvt->F3, K8_SCRCTRL, &scrubval);
 
@@ -183,13 +185,11 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
 
        for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
                if (scrubrates[i].scrubval == scrubval) {
-                       *bw = scrubrates[i].bandwidth;
-                       status = 0;
+                       retval = scrubrates[i].bandwidth;
                        break;
                }
        }
-
-       return status;
+       return retval;
 }
 
 /* Map from a CSROW entry to the mask entry that operates on it */
index b76dce96e8e60f83fc77f7e8a18e41d4f182ab2f..613ec72b0f65cba100b9845e1e076b6711ce3918 100644 (file)
@@ -482,12 +482,6 @@ struct ecc_settings {
        } flags;
 };
 
-struct scrubrate {
-       u32 scrubval;           /* bit pattern for scrub rate */
-       u32 bandwidth;          /* bandwidth consumed (bytes/sec) */
-};
-
-extern struct scrubrate scrubrates[23];
 extern const char *tt_msgs[4];
 extern const char *ll_msgs[4];
 extern const char *rrrr_msgs[16];
index 1609a19df49532b735a6170fe7f56c01114099b6..b9a781c47e3cdae63fd0aafe4ccddaaf5d5daaea 100644 (file)
@@ -818,9 +818,10 @@ static void cpc925_del_edac_devices(void)
 }
 
 /* Convert current back-ground scrub rate into byte/sec bandwith */
-static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci)
 {
        struct cpc925_mc_pdata *pdata = mci->pvt_info;
+       int bw;
        u32 mscr;
        u8 si;
 
@@ -832,11 +833,11 @@ static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
        if (((mscr & MSCR_SCRUB_MOD_MASK) != MSCR_BACKGR_SCRUB) ||
            (si == 0)) {
                cpc925_mc_printk(mci, KERN_INFO, "Scrub mode not enabled\n");
-               *bw = 0;
+               bw = 0;
        } else
-               *bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si;
+               bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si;
 
-       return 0;
+       return bw;
 }
 
 /* Return 0 for single channel; 1 for dual channel */
index 073f5a06d23857b5f09ae0d3c177920cdf13ddba..ec302d42658919ff0afcd782fed08c6dfba0bcce 100644 (file)
@@ -983,11 +983,11 @@ static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
 
        pci_write_config_word(pdev, E752X_MCHSCRB, scrubrates[i].scrubval);
 
-       return 0;
+       return scrubrates[i].bandwidth;
 }
 
 /* Convert current scrub rate value into byte/sec bandwidth */
-static int get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
 {
        const struct scrubrate *scrubrates;
        struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
@@ -1013,10 +1013,8 @@ static int get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
                        "Invalid sdram scrub control value: 0x%x\n", scrubval);
                return -1;
        }
+       return scrubrates[i].bandwidth;
 
-       *bw = scrubrates[i].bandwidth;
-
-       return 0;
 }
 
 /* Return 1 if dual channel mode is active.  Else return 0. */
index e8d3dd0b5e9c7d7655b07667eb8d4f76841f7de7..ff1eb7bb26c6258bd4678eaeea73ac04b65cb40d 100644 (file)
@@ -387,7 +387,7 @@ struct mem_ctl_info {
           representation and converts it to the closest matching
           bandwith in bytes/sec.
         */
-       int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 * bw);
+       int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
 
 
        /* pointer to edac checking routine */
index dce61f7ba38ba9094d9e300f62fe542312a623b1..39d97cfdf58cee45f3cf2c4df087cdbfa4707089 100644 (file)
@@ -436,56 +436,55 @@ static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci,
        return count;
 }
 
-/* memory scrubbing */
+/* Memory scrubbing interface:
+ *
+ * A MC driver can limit the scrubbing bandwidth based on the CPU type.
+ * Therefore, ->set_sdram_scrub_rate should be made to return the actual
+ * bandwidth that is accepted or 0 when scrubbing is to be disabled.
+ *
+ * Negative value still means that an error has occurred while setting
+ * the scrub rate.
+ */
 static ssize_t mci_sdram_scrub_rate_store(struct mem_ctl_info *mci,
                                          const char *data, size_t count)
 {
        unsigned long bandwidth = 0;
-       int err;
+       int new_bw = 0;
 
-       if (!mci->set_sdram_scrub_rate) {
-               edac_printk(KERN_WARNING, EDAC_MC,
-                           "Memory scrub rate setting not implemented!\n");
+       if (!mci->set_sdram_scrub_rate)
                return -EINVAL;
-       }
 
        if (strict_strtoul(data, 10, &bandwidth) < 0)
                return -EINVAL;
 
-       err = mci->set_sdram_scrub_rate(mci, (u32)bandwidth);
-       if (err) {
-               edac_printk(KERN_DEBUG, EDAC_MC,
-                           "Failed setting scrub rate to %lu\n", bandwidth);
-               return -EINVAL;
-       }
-       else {
-               edac_printk(KERN_DEBUG, EDAC_MC,
-                           "Scrub rate set to: %lu\n", bandwidth);
+       new_bw = mci->set_sdram_scrub_rate(mci, bandwidth);
+       if (new_bw >= 0) {
+               edac_printk(KERN_DEBUG, EDAC_MC, "Scrub rate set to %d\n", new_bw);
                return count;
        }
+
+       edac_printk(KERN_DEBUG, EDAC_MC, "Error setting scrub rate to: %lu\n", bandwidth);
+       return -EINVAL;
 }
 
+/*
+ * ->get_sdram_scrub_rate() return value semantics same as above.
+ */
 static ssize_t mci_sdram_scrub_rate_show(struct mem_ctl_info *mci, char *data)
 {
-       u32 bandwidth = 0;
-       int err;
+       int bandwidth = 0;
 
-       if (!mci->get_sdram_scrub_rate) {
-               edac_printk(KERN_WARNING, EDAC_MC,
-                           "Memory scrub rate reading not implemented\n");
+       if (!mci->get_sdram_scrub_rate)
                return -EINVAL;
-       }
 
-       err = mci->get_sdram_scrub_rate(mci, &bandwidth);
-       if (err) {
+       bandwidth = mci->get_sdram_scrub_rate(mci);
+       if (bandwidth < 0) {
                edac_printk(KERN_DEBUG, EDAC_MC, "Error reading scrub rate\n");
-               return err;
-       }
-       else {
-               edac_printk(KERN_DEBUG, EDAC_MC,
-                           "Read scrub rate: %d\n", bandwidth);
-               return sprintf(data, "%d\n", bandwidth);
+               return bandwidth;
        }
+
+       edac_printk(KERN_DEBUG, EDAC_MC, "Read scrub rate: %d\n", bandwidth);
+       return sprintf(data, "%d\n", bandwidth);
 }
 
 /* default attribute files for the MCI object */
index f459a6c0886b5d6545b78c61f77b70a0ce32bc4c..0448da0af75d7a39e3c6f190e0d7c9bc83f8f288 100644 (file)
@@ -611,20 +611,17 @@ static int i5100_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth)
 
        bandwidth = 5900000 * i5100_mc_scrben(dw);
 
-       return 0;
+       return bandwidth;
 }
 
-static int i5100_get_scrub_rate(struct mem_ctl_info *mci,
-                               u32 *bandwidth)
+static int i5100_get_scrub_rate(struct mem_ctl_info *mci)
 {
        struct i5100_priv *priv = mci->pvt_info;
        u32 dw;
 
        pci_read_config_dword(priv->mc, I5100_MC, &dw);
 
-       *bandwidth = 5900000 * i5100_mc_scrben(dw);
-
-       return 0;
+       return 5900000 * i5100_mc_scrben(dw);
 }
 
 static struct pci_dev *pci_get_device_func(unsigned vendor,