static int panic_on_ue;
static int poll_msec = 1000;
-static int check_pci_parity = 0; /* default YES check PCI parity */
-static int panic_on_pci_parity; /* default no panic on PCI Parity */
-static atomic_t pci_parity_count = ATOMIC_INIT(0);
-
/* lock to memory controller's control array */
static DECLARE_MUTEX(mem_ctls_mutex);
static struct list_head mc_devices = LIST_HEAD_INIT(mc_devices);
static struct task_struct *edac_thread;
+#ifdef CONFIG_PCI
+static int check_pci_parity = 0; /* default YES check PCI parity */
+static int panic_on_pci_parity; /* default no panic on PCI Parity */
+static atomic_t pci_parity_count = ATOMIC_INIT(0);
+
/* Structure of the whitelist and blacklist arrays */
struct edac_pci_device_list {
unsigned int vendor; /* Vendor ID */
static struct edac_pci_device_list pci_whitelist[MAX_LISTED_PCI_DEVICES];
static int pci_whitelist_count ;
+#ifndef DISABLE_EDAC_SYSFS
+static struct kobject edac_pci_kobj; /* /sys/devices/system/edac/pci */
+static struct completion edac_pci_kobj_complete;
+#endif /* DISABLE_EDAC_SYSFS */
+#endif /* CONFIG_PCI */
+
/* START sysfs data and methods */
#ifndef DISABLE_EDAC_SYSFS
set_kset_name("edac"),
};
-/* sysfs objects:
+/* sysfs object:
* /sys/devices/system/edac/mc
- * /sys/devices/system/edac/pci
*/
static struct kobject edac_memctrl_kobj;
-static struct kobject edac_pci_kobj;
/* We use these to wait for the reference counts on edac_memctrl_kobj and
* edac_pci_kobj to reach 0.
*/
static struct completion edac_memctrl_kobj_complete;
-static struct completion edac_pci_kobj_complete;
/*
* /sys/devices/system/edac/mc;
#endif /* DISABLE_EDAC_SYSFS */
}
+#ifdef CONFIG_PCI
+
#ifndef DISABLE_EDAC_SYSFS
/*
#endif
}
+
+static u16 get_pci_parity_status(struct pci_dev *dev, int secondary)
+{
+ int where;
+ u16 status;
+
+ where = secondary ? PCI_SEC_STATUS : PCI_STATUS;
+ pci_read_config_word(dev, where, &status);
+
+ /* If we get back 0xFFFF then we must suspect that the card has been
+ * pulled but the Linux PCI layer has not yet finished cleaning up.
+ * We don't want to report on such devices
+ */
+
+ if (status == 0xFFFF) {
+ u32 sanity;
+
+ pci_read_config_dword(dev, 0, &sanity);
+
+ if (sanity == 0xFFFFFFFF)
+ return 0;
+ }
+
+ status &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR |
+ PCI_STATUS_PARITY;
+
+ if (status)
+ /* reset only the bits we are interested in */
+ pci_write_config_word(dev, where, status);
+
+ return status;
+}
+
+typedef void (*pci_parity_check_fn_t) (struct pci_dev *dev);
+
+/* Clear any PCI parity errors logged by this device. */
+static void edac_pci_dev_parity_clear(struct pci_dev *dev)
+{
+ u8 header_type;
+
+ get_pci_parity_status(dev, 0);
+
+ /* read the device TYPE, looking for bridges */
+ pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE)
+ get_pci_parity_status(dev, 1);
+}
+
+/*
+ * PCI Parity polling
+ *
+ */
+static void edac_pci_dev_parity_test(struct pci_dev *dev)
+{
+ u16 status;
+ u8 header_type;
+
+ /* read the STATUS register on this device
+ */
+ status = get_pci_parity_status(dev, 0);
+
+ debugf2("PCI STATUS= 0x%04x %s\n", status, dev->dev.bus_id );
+
+ /* check the status reg for errors */
+ if (status) {
+ if (status & (PCI_STATUS_SIG_SYSTEM_ERROR))
+ edac_printk(KERN_CRIT, EDAC_PCI,
+ "Signaled System Error on %s\n",
+ pci_name(dev));
+
+ if (status & (PCI_STATUS_PARITY)) {
+ edac_printk(KERN_CRIT, EDAC_PCI,
+ "Master Data Parity Error on %s\n",
+ pci_name(dev));
+
+ atomic_inc(&pci_parity_count);
+ }
+
+ if (status & (PCI_STATUS_DETECTED_PARITY)) {
+ edac_printk(KERN_CRIT, EDAC_PCI,
+ "Detected Parity Error on %s\n",
+ pci_name(dev));
+
+ atomic_inc(&pci_parity_count);
+ }
+ }
+
+ /* read the device TYPE, looking for bridges */
+ pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+
+ debugf2("PCI HEADER TYPE= 0x%02x %s\n", header_type, dev->dev.bus_id );
+
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* On bridges, need to examine secondary status register */
+ status = get_pci_parity_status(dev, 1);
+
+ debugf2("PCI SEC_STATUS= 0x%04x %s\n",
+ status, dev->dev.bus_id );
+
+ /* check the secondary status reg for errors */
+ if (status) {
+ if (status & (PCI_STATUS_SIG_SYSTEM_ERROR))
+ edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
+ "Signaled System Error on %s\n",
+ pci_name(dev));
+
+ if (status & (PCI_STATUS_PARITY)) {
+ edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
+ "Master Data Parity Error on "
+ "%s\n", pci_name(dev));
+
+ atomic_inc(&pci_parity_count);
+ }
+
+ if (status & (PCI_STATUS_DETECTED_PARITY)) {
+ edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
+ "Detected Parity Error on %s\n",
+ pci_name(dev));
+
+ atomic_inc(&pci_parity_count);
+ }
+ }
+ }
+}
+
+/*
+ * check_dev_on_list: Scan for a PCI device on a white/black list
+ * @list: an EDAC &edac_pci_device_list white/black list pointer
+ * @free_index: index of next free entry on the list
+ * @pci_dev: PCI Device pointer
+ *
+ * see if list contains the device.
+ *
+ * Returns: 0 not found
+ * 1 found on list
+ */
+static int check_dev_on_list(struct edac_pci_device_list *list,
+ int free_index, struct pci_dev *dev)
+{
+ int i;
+ int rc = 0; /* Assume not found */
+ unsigned short vendor=dev->vendor;
+ unsigned short device=dev->device;
+
+ /* Scan the list, looking for a vendor/device match */
+ for (i = 0; i < free_index; i++, list++ ) {
+ if ((list->vendor == vendor ) && (list->device == device )) {
+ rc = 1;
+ break;
+ }
+ }
+
+ return rc;
+}
+
+/*
+ * pci_dev parity list iterator
+ * Scan the PCI device list for one iteration, looking for SERRORs
+ * Master Parity ERRORS or Parity ERRORs on primary or secondary devices
+ */
+static inline void edac_pci_dev_parity_iterator(pci_parity_check_fn_t fn)
+{
+ struct pci_dev *dev = NULL;
+
+ /* request for kernel access to the next PCI device, if any,
+ * and while we are looking at it have its reference count
+ * bumped until we are done with it
+ */
+ while((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ /* if whitelist exists then it has priority, so only scan
+ * those devices on the whitelist
+ */
+ if (pci_whitelist_count > 0 ) {
+ if (check_dev_on_list(pci_whitelist,
+ pci_whitelist_count, dev))
+ fn(dev);
+ } else {
+ /*
+ * if no whitelist, then check if this devices is
+ * blacklisted
+ */
+ if (!check_dev_on_list(pci_blacklist,
+ pci_blacklist_count, dev))
+ fn(dev);
+ }
+ }
+}
+
+static void do_pci_parity_check(void)
+{
+ unsigned long flags;
+ int before_count;
+
+ debugf3("%s()\n", __func__);
+
+ if (!check_pci_parity)
+ return;
+
+ before_count = atomic_read(&pci_parity_count);
+
+ /* scan all PCI devices looking for a Parity Error on devices and
+ * bridges
+ */
+ local_irq_save(flags);
+ edac_pci_dev_parity_iterator(edac_pci_dev_parity_test);
+ local_irq_restore(flags);
+
+ /* Only if operator has selected panic on PCI Error */
+ if (panic_on_pci_parity) {
+ /* If the count is different 'after' from 'before' */
+ if (before_count != atomic_read(&pci_parity_count))
+ panic("EDAC: PCI Parity Error");
+ }
+}
+
+static inline void clear_pci_parity_errors(void)
+{
+ /* Clear any PCI bus parity errors that devices initially have logged
+ * in their registers.
+ */
+ edac_pci_dev_parity_iterator(edac_pci_dev_parity_clear);
+}
+
+#else /* CONFIG_PCI */
+
+static inline void do_pci_parity_check(void)
+{
+ /* no-op */
+}
+
+static inline void clear_pci_parity_errors(void)
+{
+ /* no-op */
+}
+
+static void edac_sysfs_pci_teardown(void)
+{
+}
+
+static int edac_sysfs_pci_setup(void)
+{
+ return 0;
+}
+#endif /* CONFIG_PCI */
+
#ifndef DISABLE_EDAC_SYSFS
/* EDAC sysfs CSROW data structures and methods */
return err;
/* create a symlink for the device */
- err = sysfs_create_link(edac_mci_kobj, &mci->pdev->dev.kobj,
+ err = sysfs_create_link(edac_mci_kobj, &mci->dev->kobj,
EDAC_DEVICE_SYMLINK);
if (err)
debugf4("\tmci->edac_check = %p\n", mci->edac_check);
debugf3("\tmci->nr_csrows = %d, csrows = %p\n",
mci->nr_csrows, mci->csrows);
- debugf3("\tpdev = %p\n", mci->pdev);
+ debugf3("\tdev = %p\n", mci->dev);
debugf3("\tmod_name:ctl_name = %s:%s\n",
mci->mod_name, mci->ctl_name);
debugf3("\tpvt_info = %p\n\n", mci->pvt_info);
}
EXPORT_SYMBOL_GPL(edac_mc_free);
-static struct mem_ctl_info *find_mci_by_pdev(struct pci_dev *pdev)
+static struct mem_ctl_info *find_mci_by_dev(struct device *dev)
{
struct mem_ctl_info *mci;
struct list_head *item;
list_for_each(item, &mc_devices) {
mci = list_entry(item, struct mem_ctl_info, link);
- if (mci->pdev == pdev)
+ if (mci->dev == dev)
return mci;
}
mci->mc_idx = 0;
insert_before = &mc_devices;
} else {
- if (find_mci_by_pdev(mci->pdev)) {
+ if (find_mci_by_dev(mci->dev)) {
edac_printk(KERN_WARNING, EDAC_MC,
"%s (%s) %s %s already assigned %d\n",
- mci->pdev->dev.bus_id,
- pci_name(mci->pdev), mci->mod_name,
- mci->ctl_name, mci->mc_idx);
+ mci->dev->bus_id, dev_name(mci->dev),
+ mci->mod_name, mci->ctl_name,
+ mci->mc_idx);
return 1;
}
}
/* Report action taken */
- edac_mc_printk(mci, KERN_INFO, "Giving out device to %s %s: PCI %s\n",
- mci->mod_name, mci->ctl_name, pci_name(mci->pdev));
+ edac_mc_printk(mci, KERN_INFO, "Giving out device to %s %s: DEV %s\n",
+ mci->mod_name, mci->ctl_name, dev_name(mci->dev));
up(&mem_ctls_mutex);
return 0;
/**
* edac_mc_del_mc: Remove sysfs entries for specified mci structure and
* remove mci structure from global list
- * @pdev: Pointer to 'struct pci_dev' representing mci structure to remove.
+ * @pdev: Pointer to 'struct device' representing mci structure to remove.
*
* Return pointer to removed mci structure, or NULL if device not found.
*/
-struct mem_ctl_info * edac_mc_del_mc(struct pci_dev *pdev)
+struct mem_ctl_info * edac_mc_del_mc(struct device *dev)
{
struct mem_ctl_info *mci;
debugf0("MC: %s()\n", __func__);
down(&mem_ctls_mutex);
- if ((mci = find_mci_by_pdev(pdev)) == NULL) {
+ if ((mci = find_mci_by_dev(dev)) == NULL) {
up(&mem_ctls_mutex);
return NULL;
}
del_mc_from_global_list(mci);
up(&mem_ctls_mutex);
edac_printk(KERN_INFO, EDAC_MC,
- "Removed device %d for %s %s: PCI %s\n", mci->mc_idx,
- mci->mod_name, mci->ctl_name, pci_name(mci->pdev));
+ "Removed device %d for %s %s: DEV %s\n", mci->mc_idx,
+ mci->mod_name, mci->ctl_name, dev_name(mci->dev));
return mci;
}
EXPORT_SYMBOL_GPL(edac_mc_del_mc);
}
EXPORT_SYMBOL_GPL(edac_mc_handle_ue_no_info);
-#ifdef CONFIG_PCI
-
-static u16 get_pci_parity_status(struct pci_dev *dev, int secondary)
-{
- int where;
- u16 status;
-
- where = secondary ? PCI_SEC_STATUS : PCI_STATUS;
- pci_read_config_word(dev, where, &status);
-
- /* If we get back 0xFFFF then we must suspect that the card has been
- * pulled but the Linux PCI layer has not yet finished cleaning up.
- * We don't want to report on such devices
- */
-
- if (status == 0xFFFF) {
- u32 sanity;
-
- pci_read_config_dword(dev, 0, &sanity);
-
- if (sanity == 0xFFFFFFFF)
- return 0;
- }
-
- status &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR |
- PCI_STATUS_PARITY;
-
- if (status)
- /* reset only the bits we are interested in */
- pci_write_config_word(dev, where, status);
-
- return status;
-}
-
-typedef void (*pci_parity_check_fn_t) (struct pci_dev *dev);
-
-/* Clear any PCI parity errors logged by this device. */
-static void edac_pci_dev_parity_clear(struct pci_dev *dev)
-{
- u8 header_type;
-
- get_pci_parity_status(dev, 0);
-
- /* read the device TYPE, looking for bridges */
- pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
-
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE)
- get_pci_parity_status(dev, 1);
-}
-
-/*
- * PCI Parity polling
- *
- */
-static void edac_pci_dev_parity_test(struct pci_dev *dev)
-{
- u16 status;
- u8 header_type;
-
- /* read the STATUS register on this device
- */
- status = get_pci_parity_status(dev, 0);
-
- debugf2("PCI STATUS= 0x%04x %s\n", status, dev->dev.bus_id );
-
- /* check the status reg for errors */
- if (status) {
- if (status & (PCI_STATUS_SIG_SYSTEM_ERROR))
- edac_printk(KERN_CRIT, EDAC_PCI,
- "Signaled System Error on %s\n",
- pci_name(dev));
-
- if (status & (PCI_STATUS_PARITY)) {
- edac_printk(KERN_CRIT, EDAC_PCI,
- "Master Data Parity Error on %s\n",
- pci_name(dev));
-
- atomic_inc(&pci_parity_count);
- }
-
- if (status & (PCI_STATUS_DETECTED_PARITY)) {
- edac_printk(KERN_CRIT, EDAC_PCI,
- "Detected Parity Error on %s\n",
- pci_name(dev));
-
- atomic_inc(&pci_parity_count);
- }
- }
-
- /* read the device TYPE, looking for bridges */
- pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
-
- debugf2("PCI HEADER TYPE= 0x%02x %s\n", header_type, dev->dev.bus_id );
-
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
- /* On bridges, need to examine secondary status register */
- status = get_pci_parity_status(dev, 1);
-
- debugf2("PCI SEC_STATUS= 0x%04x %s\n",
- status, dev->dev.bus_id );
-
- /* check the secondary status reg for errors */
- if (status) {
- if (status & (PCI_STATUS_SIG_SYSTEM_ERROR))
- edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
- "Signaled System Error on %s\n",
- pci_name(dev));
-
- if (status & (PCI_STATUS_PARITY)) {
- edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
- "Master Data Parity Error on "
- "%s\n", pci_name(dev));
-
- atomic_inc(&pci_parity_count);
- }
-
- if (status & (PCI_STATUS_DETECTED_PARITY)) {
- edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
- "Detected Parity Error on %s\n",
- pci_name(dev));
-
- atomic_inc(&pci_parity_count);
- }
- }
- }
-}
-
-/*
- * check_dev_on_list: Scan for a PCI device on a white/black list
- * @list: an EDAC &edac_pci_device_list white/black list pointer
- * @free_index: index of next free entry on the list
- * @pci_dev: PCI Device pointer
- *
- * see if list contains the device.
- *
- * Returns: 0 not found
- * 1 found on list
- */
-static int check_dev_on_list(struct edac_pci_device_list *list,
- int free_index, struct pci_dev *dev)
-{
- int i;
- int rc = 0; /* Assume not found */
- unsigned short vendor=dev->vendor;
- unsigned short device=dev->device;
-
- /* Scan the list, looking for a vendor/device match */
- for (i = 0; i < free_index; i++, list++ ) {
- if ((list->vendor == vendor ) && (list->device == device )) {
- rc = 1;
- break;
- }
- }
-
- return rc;
-}
-
-/*
- * pci_dev parity list iterator
- * Scan the PCI device list for one iteration, looking for SERRORs
- * Master Parity ERRORS or Parity ERRORs on primary or secondary devices
- */
-static inline void edac_pci_dev_parity_iterator(pci_parity_check_fn_t fn)
-{
- struct pci_dev *dev = NULL;
-
- /* request for kernel access to the next PCI device, if any,
- * and while we are looking at it have its reference count
- * bumped until we are done with it
- */
- while((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- /* if whitelist exists then it has priority, so only scan
- * those devices on the whitelist
- */
- if (pci_whitelist_count > 0 ) {
- if (check_dev_on_list(pci_whitelist,
- pci_whitelist_count, dev))
- fn(dev);
- } else {
- /*
- * if no whitelist, then check if this devices is
- * blacklisted
- */
- if (!check_dev_on_list(pci_blacklist,
- pci_blacklist_count, dev))
- fn(dev);
- }
- }
-}
-
-static void do_pci_parity_check(void)
-{
- unsigned long flags;
- int before_count;
-
- debugf3("%s()\n", __func__);
-
- if (!check_pci_parity)
- return;
-
- before_count = atomic_read(&pci_parity_count);
-
- /* scan all PCI devices looking for a Parity Error on devices and
- * bridges
- */
- local_irq_save(flags);
- edac_pci_dev_parity_iterator(edac_pci_dev_parity_test);
- local_irq_restore(flags);
-
- /* Only if operator has selected panic on PCI Error */
- if (panic_on_pci_parity) {
- /* If the count is different 'after' from 'before' */
- if (before_count != atomic_read(&pci_parity_count))
- panic("EDAC: PCI Parity Error");
- }
-}
-
-static inline void clear_pci_parity_errors(void)
-{
- /* Clear any PCI bus parity errors that devices initially have logged
- * in their registers.
- */
- edac_pci_dev_parity_iterator(edac_pci_dev_parity_clear);
-}
-
-#else /* CONFIG_PCI */
-
-static inline void do_pci_parity_check(void)
-{
- /* no-op */
-}
-
-static inline void clear_pci_parity_errors(void)
-{
- /* no-op */
-}
-
-#endif /* CONFIG_PCI */
/*
* Iterate over all MC instances and check for ECC, et al, errors
module_param(panic_on_ue, int, 0644);
MODULE_PARM_DESC(panic_on_ue, "Panic on uncorrected error: 0=off 1=on");
+#ifdef CONFIG_PCI
module_param(check_pci_parity, int, 0644);
MODULE_PARM_DESC(check_pci_parity, "Check for PCI bus parity errors: 0=off 1=on");
module_param(panic_on_pci_parity, int, 0644);
MODULE_PARM_DESC(panic_on_pci_parity, "Panic on PCI Bus Parity error: 0=off 1=on");
+#endif
module_param(log_ue, int, 0644);
MODULE_PARM_DESC(log_ue, "Log uncorrectable error to console: 0=off 1=on");
module_param(log_ce, int, 0644);
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff