e1000: fix tx hang detect logic and address dma mapping issues
authorAlexander Duyck <alexander.h.duyck@intel.com>
Wed, 25 Mar 2009 21:58:45 +0000 (21:58 +0000)
committerDavid S. Miller <davem@davemloft.net>
Thu, 26 Mar 2009 08:00:53 +0000 (01:00 -0700)
This patch changes the dma mapping to better support
skb_dma_map/skb_dma_unmap and addresses and redefines the tx hang logic to
be based off of time stamp instead of if the dma field is populated

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/e1000/e1000_main.c

index 1f390ceb486978a70be5ffa9f37fd03a6a0b4828..e60faabe9024a81d28343a41372c171b15b9ba3b 100644 (file)
@@ -2056,6 +2056,7 @@ static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
                dev_kfree_skb_any(buffer_info->skb);
                buffer_info->skb = NULL;
        }
+       buffer_info->time_stamp = 0;
        /* buffer_info must be completely set up in the transmit path */
 }
 
@@ -2903,24 +2904,24 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
                        unsigned int mss)
 {
        struct e1000_hw *hw = &adapter->hw;
+       struct e1000_buffer *buffer_info;
        unsigned int len = skb_headlen(skb);
        unsigned int offset, size, count = 0, i;
        unsigned int f;
-       dma_addr_t map;
+       dma_addr_t *map;
 
        i = tx_ring->next_to_use;
 
        if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
                dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
-               dev_kfree_skb(skb);
-               return -2;
+               return 0;
        }
 
-       map = skb_shinfo(skb)->dma_maps[0];
+       map = skb_shinfo(skb)->dma_maps;
        offset = 0;
 
        while (len) {
-               struct e1000_buffer *buffer_info = &tx_ring->buffer_info[i];
+               buffer_info = &tx_ring->buffer_info[i];
                size = min(len, max_per_txd);
                /* Workaround for Controller erratum --
                 * descriptor for non-tso packet in a linear SKB that follows a
@@ -2953,14 +2954,18 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
                        size -= 4;
 
                buffer_info->length = size;
-               buffer_info->dma = map + offset;
+               buffer_info->dma = map[0] + offset;
                buffer_info->time_stamp = jiffies;
                buffer_info->next_to_watch = i;
 
                len -= size;
                offset += size;
                count++;
-               if (unlikely(++i == tx_ring->count)) i = 0;
+               if (len) {
+                       i++;
+                       if (unlikely(i == tx_ring->count))
+                               i = 0;
+               }
        }
 
        for (f = 0; f < nr_frags; f++) {
@@ -2968,11 +2973,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 
                frag = &skb_shinfo(skb)->frags[f];
                len = frag->size;
-               map = skb_shinfo(skb)->dma_maps[f + 1];
                offset = 0;
 
                while (len) {
-                       struct e1000_buffer *buffer_info;
+                       i++;
+                       if (unlikely(i == tx_ring->count))
+                               i = 0;
+
                        buffer_info = &tx_ring->buffer_info[i];
                        size = min(len, max_per_txd);
                        /* Workaround for premature desc write-backs
@@ -2988,21 +2995,18 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
                                size -= 4;
 
                        buffer_info->length = size;
-                       buffer_info->dma = map + offset;
+                       buffer_info->dma = map[f + 1] + offset;
                        buffer_info->time_stamp = jiffies;
                        buffer_info->next_to_watch = i;
 
                        len -= size;
                        offset += size;
                        count++;
-                       if (unlikely(++i == tx_ring->count)) i = 0;
                }
        }
 
-       i = (i == 0) ? tx_ring->count - 1 : i - 1;
        tx_ring->buffer_info[i].skb = skb;
        tx_ring->buffer_info[first].next_to_watch = i;
-       smp_wmb();
 
        return count;
 }
@@ -3318,14 +3322,20 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
        if (likely(skb->protocol == htons(ETH_P_IP)))
                tx_flags |= E1000_TX_FLAGS_IPV4;
 
-       e1000_tx_queue(adapter, tx_ring, tx_flags,
-                      e1000_tx_map(adapter, tx_ring, skb, first,
-                                   max_per_txd, nr_frags, mss));
+       count = e1000_tx_map(adapter, tx_ring, skb, first, max_per_txd,
+                            nr_frags, mss);
 
-       netdev->trans_start = jiffies;
+       if (count) {
+               e1000_tx_queue(adapter, tx_ring, tx_flags, count);
+               netdev->trans_start = jiffies;
+               /* Make sure there is space in the ring for the next send. */
+               e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
 
-       /* Make sure there is space in the ring for the next send. */
-       e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
+       } else {
+               dev_kfree_skb_any(skb);
+               tx_ring->buffer_info[first].time_stamp = 0;
+               tx_ring->next_to_use = first;
+       }
 
        return NETDEV_TX_OK;
 }
@@ -3842,12 +3852,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
                /* Detect a transmit hang in hardware, this serializes the
                 * check with the clearing of time_stamp and movement of i */
                adapter->detect_tx_hung = false;
-               /*
-                * read barrier to make sure that the ->dma member and time
-                * stamp are updated fully
-                */
-               smp_rmb();
-               if (tx_ring->buffer_info[eop].dma &&
+               if (tx_ring->buffer_info[eop].time_stamp &&
                    time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
                               (adapter->tx_timeout_factor * HZ))
                    && !(er32(STATUS) & E1000_STATUS_TXOFF)) {