hwmon: (adt7475) Handle alternative pin functions
authorJean Delvare <khali@linux-fr.org>
Wed, 9 Dec 2009 19:36:06 +0000 (20:36 +0100)
committerJean Delvare <khali@linux-fr.org>
Wed, 9 Dec 2009 19:36:06 +0000 (20:36 +0100)
The TACH4 pin can be used for other functions, so fan4 may not always
be available. Likewise, the PWM2 pin can be used for ALERT output, in
which case pwm2 is not available

For the ADT7490, the +2.5 Vin pin may also be used for other
functions, in which case in0 is not available.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
drivers/hwmon/adt7475.c

index 716dae9ff0f771a3e54c90c394b3a9c975b528b3..d20130723d684600d7d9bac9fa3d5eae4123a95a 100644 (file)
@@ -80,6 +80,8 @@
 
 #define REG_EXTEND1            0x76
 #define REG_EXTEND2            0x77
+
+#define REG_CONFIG3            0x78
 #define REG_CONFIG5            0x7C
 #define REG_CONFIG4            0x7D
 
 #define REG_VTT_MIN            0x84    /* ADT7490 only */
 #define REG_VTT_MAX            0x86    /* ADT7490 only */
 
+#define CONFIG3_SMBALERT       0x01
+#define CONFIG3_THERM          0x02
+
+#define CONFIG4_PINFUNC                0x03
 #define CONFIG4_MAXDUTY                0x08
 
 #define CONFIG5_TWOSCOMP       0x01
@@ -149,6 +155,8 @@ struct adt7475_data {
        u8 config4;
        u8 config5;
        u8 has_voltage;
+       u8 has_pwm2:1;
+       u8 has_fan4:1;
        u32 alarms;
        u16 voltage[3][6];
        u16 temp[7][3];
@@ -1025,21 +1033,12 @@ static struct attribute *adt7475_attrs[] = {
        &sensor_dev_attr_fan3_input.dev_attr.attr,
        &sensor_dev_attr_fan3_min.dev_attr.attr,
        &sensor_dev_attr_fan3_alarm.dev_attr.attr,
-       &sensor_dev_attr_fan4_input.dev_attr.attr,
-       &sensor_dev_attr_fan4_min.dev_attr.attr,
-       &sensor_dev_attr_fan4_alarm.dev_attr.attr,
        &sensor_dev_attr_pwm1.dev_attr.attr,
        &sensor_dev_attr_pwm1_freq.dev_attr.attr,
        &sensor_dev_attr_pwm1_enable.dev_attr.attr,
        &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
        &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
-       &sensor_dev_attr_pwm2.dev_attr.attr,
-       &sensor_dev_attr_pwm2_freq.dev_attr.attr,
-       &sensor_dev_attr_pwm2_enable.dev_attr.attr,
-       &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
-       &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
-       &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
        &sensor_dev_attr_pwm3.dev_attr.attr,
        &sensor_dev_attr_pwm3_freq.dev_attr.attr,
        &sensor_dev_attr_pwm3_enable.dev_attr.attr,
@@ -1050,12 +1049,33 @@ static struct attribute *adt7475_attrs[] = {
        NULL,
 };
 
+static struct attribute *fan4_attrs[] = {
+       &sensor_dev_attr_fan4_input.dev_attr.attr,
+       &sensor_dev_attr_fan4_min.dev_attr.attr,
+       &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+       NULL
+};
+
+static struct attribute *pwm2_attrs[] = {
+       &sensor_dev_attr_pwm2.dev_attr.attr,
+       &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+       &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+       &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+       &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+       &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+       NULL
+};
+
 /* Attributes specific to the ADT7490 */
-static struct attribute *adt7490_attrs[] = {
+static struct attribute *in0_attrs[] = {
        &sensor_dev_attr_in0_input.dev_attr.attr,
        &sensor_dev_attr_in0_max.dev_attr.attr,
        &sensor_dev_attr_in0_min.dev_attr.attr,
        &sensor_dev_attr_in0_alarm.dev_attr.attr,
+       NULL
+};
+
+static struct attribute *adt7490_attrs[] = {
        &sensor_dev_attr_in3_input.dev_attr.attr,
        &sensor_dev_attr_in3_max.dev_attr.attr,
        &sensor_dev_attr_in3_min.dev_attr.attr,
@@ -1072,6 +1092,9 @@ static struct attribute *adt7490_attrs[] = {
 };
 
 static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+static struct attribute_group fan4_attr_group = { .attrs = fan4_attrs };
+static struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs };
+static struct attribute_group in0_attr_group = { .attrs = in0_attrs };
 static struct attribute_group adt7490_attr_group = { .attrs = adt7490_attrs };
 
 static int adt7475_detect(struct i2c_client *client, int kind,
@@ -1115,13 +1138,20 @@ static void adt7475_remove_files(struct i2c_client *client,
        sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
        if (data->has_voltage & 0x39)
                sysfs_remove_group(&client->dev.kobj, &adt7490_attr_group);
+       if (data->has_fan4)
+               sysfs_remove_group(&client->dev.kobj, &fan4_attr_group);
+       if (data->has_pwm2)
+               sysfs_remove_group(&client->dev.kobj, &pwm2_attr_group);
+       if (data->has_voltage & (1 << 0))
+               sysfs_remove_group(&client->dev.kobj, &in0_attr_group);
 }
 
 static int adt7475_probe(struct i2c_client *client,
                         const struct i2c_device_id *id)
 {
        struct adt7475_data *data;
-       int i, ret = 0;
+       int i, ret = 0, revision;
+       u8 config3;
 
        data = kzalloc(sizeof(*data), GFP_KERNEL);
        if (data == NULL)
@@ -1133,10 +1163,36 @@ static int adt7475_probe(struct i2c_client *client,
        /* Initialize device-specific values */
        switch (id->driver_data) {
        case adt7490:
-               data->has_voltage = 0x3f;       /* in0 to in5 */
+               data->has_voltage = 0x3e;       /* in1 to in5 */
+               revision = adt7475_read(REG_DEVID2) & 0x03;
                break;
        default:
                data->has_voltage = 0x06;       /* in1, in2 */
+               revision = adt7475_read(REG_DEVID2) & 0x07;
+       }
+
+       config3 = adt7475_read(REG_CONFIG3);
+       /* Pin PWM2 may alternatively be used for ALERT output */
+       if (!(config3 & CONFIG3_SMBALERT))
+               data->has_pwm2 = 1;
+       /* Meaning of this bit is inverted for the ADT7473-1 */
+       if (id->driver_data == adt7473 && revision >= 1)
+               data->has_pwm2 = !data->has_pwm2;
+
+       data->config4 = adt7475_read(REG_CONFIG4);
+       /* Pin TACH4 may alternatively be used for THERM */
+       if ((data->config4 & CONFIG4_PINFUNC) == 0x0)
+               data->has_fan4 = 1;
+
+       /* THERM configuration is more complex on the ADT7490, because 2
+          different pins (TACH4 and +2.5 Vin) can be used for this function */
+       if (id->driver_data == adt7490) {
+               if ((data->config4 & CONFIG4_PINFUNC) == 0x1 &&
+                   !(config3 & CONFIG3_THERM))
+                       data->has_fan4 = 1;
+               if (!(config3 & CONFIG3_THERM) ||
+                   (data->config4 & CONFIG4_PINFUNC) == 0x1)
+                       data->has_voltage |= (1 << 0);          /* in0 */
        }
 
        /* Call adt7475_read_pwm for all pwm's as this will reprogram any
@@ -1155,6 +1211,23 @@ static int adt7475_probe(struct i2c_client *client,
                        goto eremove;
        }
 
+       /* Features that can be disabled individually */
+       if (data->has_fan4) {
+               ret = sysfs_create_group(&client->dev.kobj, &fan4_attr_group);
+               if (ret)
+                       goto eremove;
+       }
+       if (data->has_pwm2) {
+               ret = sysfs_create_group(&client->dev.kobj, &pwm2_attr_group);
+               if (ret)
+                       goto eremove;
+       }
+       if (data->has_voltage & (1 << 0)) {
+               ret = sysfs_create_group(&client->dev.kobj, &in0_attr_group);
+               if (ret)
+                       goto eremove;
+       }
+
        data->hwmon_dev = hwmon_device_register(&client->dev);
        if (IS_ERR(data->hwmon_dev)) {
                ret = PTR_ERR(data->hwmon_dev);
@@ -1293,13 +1366,19 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
                                ((ext >> 4) & 3);
                }
 
-               for (i = 0; i < ADT7475_TACH_COUNT; i++)
+               for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+                       if (i == 3 && !data->has_fan4)
+                               continue;
                        data->tach[INPUT][i] =
                                adt7475_read_word(client, TACH_REG(i));
+               }
 
                /* Updated by hw when in auto mode */
-               for (i = 0; i < ADT7475_PWM_COUNT; i++)
+               for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+                       if (i == 1 && !data->has_pwm2)
+                               continue;
                        data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
+               }
 
                data->measure_updated = jiffies;
        }
@@ -1340,11 +1419,16 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
                }
                adt7475_read_hystersis(client);
 
-               for (i = 0; i < ADT7475_TACH_COUNT; i++)
+               for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+                       if (i == 3 && !data->has_fan4)
+                               continue;
                        data->tach[MIN][i] =
                                adt7475_read_word(client, TACH_MIN_REG(i));
+               }
 
                for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+                       if (i == 1 && !data->has_pwm2)
+                               continue;
                        data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i));
                        data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i));
                        /* Set the channel and control information */