mtd: docg3: add registers for erasing and writing

Add the required registers and commands to erase and write
flash pages / blocks.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

diff --git a/drivers/mtd/devices/docg3.h b/drivers/mtd/devices/docg3.h
index 75df3a1060fbd670c1d851e8e39543444f02cd82..e9967aba80a8a6b93378b09c66e9f4f24eb7145e 100644 (file)
--- a/drivers/mtd/devices/docg3.h
+++ b/drivers/mtd/devices/docg3.h
@@ -130,6 +130,8 @@
 #define DOC_SEQ_SET_PLANE1             0x0e
 #define DOC_SEQ_SET_PLANE2             0x10
 #define DOC_SEQ_PAGE_SETUP             0x1d
+#define DOC_SEQ_ERASE                  0x27
+#define DOC_SEQ_PLANES_STATUS          0x31
 
 /*
  * Flash commands
@@ -144,7 +146,10 @@
 #define DOC_CMD_PROG_BLOCK_ADDR                0x60
 #define DOC_CMD_PROG_CYCLE1            0x80
 #define DOC_CMD_PROG_CYCLE2            0x10
+#define DOC_CMD_PROG_CYCLE3            0x11
 #define DOC_CMD_ERASECYCLE2            0xd0
+#define DOC_CMD_READ_STATUS            0x70
+#define DOC_CMD_PLANES_STATUS          0x71
 
 #define DOC_CMD_RELIABLE_MODE          0x22
 #define DOC_CMD_FAST_MODE              0xa2
@@ -186,7 +191,7 @@
  */
 #define DOC_ECCCONF1_BCH_SYNDROM_ERR   0x80
 #define DOC_ECCCONF1_UNKOWN1           0x40
-#define DOC_ECCCONF1_UNKOWN2           0x20
+#define DOC_ECCCONF1_PAGE_IS_WRITTEN   0x20
 #define DOC_ECCCONF1_UNKOWN3           0x10
 #define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f
 
@@ -224,6 +229,13 @@
 #define DOC_READADDR_ONE_BYTE          0x4000
 #define DOC_READADDR_ADDR_MASK         0x1fff
 
+/*
+ * Status of erase and write operation
+ */
+#define DOC_PLANES_STATUS_FAIL         0x01
+#define DOC_PLANES_STATUS_PLANE0_KO    0x02
+#define DOC_PLANES_STATUS_PLANE1_KO    0x04
+
 /**
  * struct docg3 - DiskOnChip driver private data
  * @dev: the device currently under control