bnx2: Check if_running() before touching chip registers.
authorMichael Chan <mchan@broadcom.com>
Fri, 21 Aug 2009 16:20:44 +0000 (16:20 +0000)
committerDavid S. Miller <davem@davemloft.net>
Sun, 23 Aug 2009 00:48:42 +0000 (17:48 -0700)
Add this check to bnx2_netif_stop() and bnx2_vlan_rx_register() to
prevent bus lockups on some systems when the chip is in low power state.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/bnx2.c

index e75b6e94f6521dc26c75901923d5dd0d91e7ff5b..9cfd46017e4e408926b271ab78af63e56ed86062 100644 (file)
@@ -619,6 +619,9 @@ bnx2_disable_int_sync(struct bnx2 *bp)
        int i;
 
        atomic_inc(&bp->intr_sem);
+       if (!netif_running(bp->dev))
+               return;
+
        bnx2_disable_int(bp);
        for (i = 0; i < bp->irq_nvecs; i++)
                synchronize_irq(bp->irq_tbl[i].vector);
@@ -6254,9 +6257,14 @@ bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp)
 {
        struct bnx2 *bp = netdev_priv(dev);
 
-       bnx2_netif_stop(bp);
+       if (netif_running(dev))
+               bnx2_netif_stop(bp);
 
        bp->vlgrp = vlgrp;
+
+       if (!netif_running(dev))
+               return;
+
        bnx2_set_rx_mode(dev);
        if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
                bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE, 0, 1);