#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
+#include <linux/pci.h>
/*
* This is just simple sample code.
* Even less warranty that it actually works :-)
*/
+/*
+ * Driver data
+ */
+static char *mode_option __devinitdata;
+
/*
* If your driver supports multiple boards, you should make the
* below data types arrays, or allocate them dynamically (using kmalloc()).
*/
static int xxxfb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
- const struct fb_info *info)
+ struct fb_info *info)
{
if (regno >= 256) /* no. of hw registers */
return -EINVAL;
* Returns negative errno on error, or zero on success.
*/
static int xxxfb_pan_display(struct fb_var_screeninfo *var,
- const struct fb_info *info)
+ struct fb_info *info)
{
/*
* If your hardware does not support panning, _do_ _not_ implement this
* Return !0 for any modes that are unimplemented.
*
*/
-static int xxxfb_blank(int blank_mode, const struct fb_info *info)
+static int xxxfb_blank(int blank_mode, struct fb_info *info)
{
/* ... */
return 0;
* depending on the rastering operation with the value of color which
* is in the current color depth format.
*/
-void xxfb_fillrect(struct fb_info *p, const struct fb_fillrect *region)
+void xxxfb_fillrect(struct fb_info *p, const struct fb_fillrect *region)
{
/* Meaning of struct fb_fillrect
*
* If the driver has implemented its own hardware-based drawing function,
* implementing this function is highly recommended.
*/
-void xxxfb_sync(struct fb_info *info)
+int xxxfb_sync(struct fb_info *info)
{
+ return 0;
}
+ /*
+ * Frame buffer operations
+ */
+
+static struct fb_ops xxxfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = xxxfb_open,
+ .fb_read = xxxfb_read,
+ .fb_write = xxxfb_write,
+ .fb_release = xxxfb_release,
+ .fb_check_var = xxxfb_check_var,
+ .fb_set_par = xxxfb_set_par,
+ .fb_setcolreg = xxxfb_setcolreg,
+ .fb_blank = xxxfb_blank,
+ .fb_pan_display = xxxfb_pan_display,
+ .fb_fillrect = xxxfb_fillrect, /* Needed !!! */
+ .fb_copyarea = xxxfb_copyarea, /* Needed !!! */
+ .fb_imageblit = xxxfb_imageblit, /* Needed !!! */
+ .fb_cursor = xxxfb_cursor, /* Optional !!! */
+ .fb_rotate = xxxfb_rotate,
+ .fb_poll = xxxfb_poll,
+ .fb_sync = xxxfb_sync,
+ .fb_ioctl = xxxfb_ioctl,
+ .fb_mmap = xxxfb_mmap,
+};
+
+/* ------------------------------------------------------------------------- */
+
/*
* Initialization
*/
/* static int __init xxfb_probe (struct device *device) -- for platform devs */
-static int __init xxxfb_probe(struct pci_dev *dev,
+static int __devinit xxxfb_probe(struct pci_dev *dev,
const_struct pci_device_id *ent)
{
struct fb_info *info;
struct xxx_par *par;
- struct device = &dev->dev; /* for pci drivers */
+ struct device* device = &dev->dev; /* for pci drivers */
int cmap_len, retval;
/*
*
* NOTE: This field is currently unused.
*/
- info->pixmap.scan_align = 32
+ info->pixmap.scan_align = 32;
/***************************** End optional stage ***************************/
/*
if (!mode_option)
mode_option = "640x480@60";
- retval = fb_find_mode(info->var, info, mode_option, NULL, 0, NULL, 8);
+ retval = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8);
if (!retval || retval == 4)
return -EINVAL;
/* This has to been done !!! */
- fb_alloc_cmap(info->cmap, cmap_len, 0);
+ fb_alloc_cmap(&info->cmap, cmap_len, 0);
/*
* The following is done in the case of having hardware with a static
/*
* Cleanup
*/
-/* static void __exit xxxfb_remove(struct device *device) */
-static void __exit xxxfb_remove(struct pci_dev *dev)
+/* static void __devexit xxxfb_remove(struct device *device) */
+static void __devexit xxxfb_remove(struct pci_dev *dev)
{
- struct fb_info *info = pci_get_drv_data(dev);
- /* or dev_get_drv_data(device); */
+ struct fb_info *info = pci_get_drvdata(dev);
+ /* or dev_get_drvdata(device); */
if (info) {
unregister_framebuffer(info);
- fb_dealloc_cmap(&info.cmap);
+ fb_dealloc_cmap(&info->cmap);
/* ... */
framebuffer_release(info);
}
return 0;
}
-#if CONFIG_PCI
+#ifdef CONFIG_PCI
+#ifdef CONFIG_PM
+/**
+ * xxxfb_suspend - Optional but recommended function. Suspend the device.
+ * @dev: PCI device
+ * @msg: the suspend event code.
+ *
+ * See Documentation/power/devices.txt for more information
+ */
+static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
+{
+ struct fb_info *info = pci_get_drvdata(dev);
+ struct xxxfb_par *par = info->par;
+
+ /* suspend here */
+ return 0;
+}
+
+/**
+ * xxxfb_resume - Optional but recommended function. Resume the device.
+ * @dev: PCI device
+ *
+ * See Documentation/power/devices.txt for more information
+ */
+static int xxxfb_resume(struct pci_dev *dev)
+{
+ struct fb_info *info = pci_get_drvdata(dev);
+ struct xxxfb_par *par = info->par;
+
+ /* resume here */
+ return 0;
+}
+#else
+#define xxxfb_suspend NULL
+#define xxxfb_resume NULL
+#endif /* CONFIG_PM */
+
+static struct pci_device_id xxxfb_id_table[] = {
+ { PCI_VENDOR_ID_XXX, PCI_DEVICE_ID_XXX,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
+ ADDR, 0 },
+ { 0, }
+};
+
/* For PCI drivers */
static struct pci_driver xxxfb_driver = {
.name = "xxxfb",
- .id_table = xxxfb_devices,
+ .id_table = xxxfb_id_table,
.probe = xxxfb_probe,
.remove = __devexit_p(xxxfb_remove),
- .suspend = xxxfb_suspend, /* optional */
- .resume = xxxfb_resume, /* optional */
+ .suspend = xxxfb_suspend, /* optional but recommended */
+ .resume = xxxfb_resume, /* optional but recommended */
};
-static int __init xxxfb_init(void)
+int __init xxxfb_init(void)
{
/*
* For kernel boot options (in 'video=xxxfb:<options>' format)
{
pci_unregister_driver(&xxxfb_driver);
}
-#else
+#else /* non PCI, platform drivers */
#include <linux/platform_device.h>
/* for platform devices */
+
+#ifdef CONFIG_PM
+/**
+ * xxxfb_suspend - Optional but recommended function. Suspend the device.
+ * @dev: platform device
+ * @msg: the suspend event code.
+ *
+ * See Documentation/power/devices.txt for more information
+ */
+static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg)
+{
+ struct fb_info *info = platform_get_drvdata(dev);
+ struct xxxfb_par *par = info->par;
+
+ /* suspend here */
+ return 0;
+}
+
+/**
+ * xxxfb_resume - Optional but recommended function. Resume the device.
+ * @dev: PCI device
+ *
+ * See Documentation/power/devices.txt for more information
+ */
+static int xxxfb_suspend(struct platform_dev *dev)
+{
+ struct fb_info *info = platform_get_drvdata(dev);
+ struct xxxfb_par *par = info->par;
+
+ /* resume here */
+ return 0;
+}
+#else
+#define xxxfb_suspend NULL
+#define xxxfb_resume NULL
+#endif /* CONFIG_PM */
+
static struct device_driver xxxfb_driver = {
.name = "xxxfb",
.bus = &platform_bus_type,
.probe = xxxfb_probe,
.remove = xxxfb_remove,
- .suspend = xxxfb_suspend, /* optional */
- .resume = xxxfb_resume, /* optional */
+ .suspend = xxxfb_suspend, /* optional but recommended */
+ .resume = xxxfb_resume, /* optional but recommended */
};
static struct platform_device xxxfb_device = {
platform_device_unregister(&xxxfb_device);
driver_unregister(&xxxfb_driver);
}
-#endif
+#endif /* CONFIG_PCI */
+#ifdef MODULE
/*
* Setup
*/
{
/* Parse user speficied options (`video=xxxfb:') */
}
-
-/* ------------------------------------------------------------------------- */
-
- /*
- * Frame buffer operations
- */
-
-static struct fb_ops xxxfb_ops = {
- .owner = THIS_MODULE,
- .fb_open = xxxfb_open,
- .fb_read = xxxfb_read,
- .fb_write = xxxfb_write,
- .fb_release = xxxfb_release,
- .fb_check_var = xxxfb_check_var,
- .fb_set_par = xxxfb_set_par,
- .fb_setcolreg = xxxfb_setcolreg,
- .fb_blank = xxxfb_blank,
- .fb_pan_display = xxxfb_pan_display,
- .fb_fillrect = xxxfb_fillrect, /* Needed !!! */
- .fb_copyarea = xxxfb_copyarea, /* Needed !!! */
- .fb_imageblit = xxxfb_imageblit, /* Needed !!! */
- .fb_cursor = xxxfb_cursor, /* Optional !!! */
- .fb_rotate = xxxfb_rotate,
- .fb_poll = xxxfb_poll,
- .fb_sync = xxxfb_sync,
- .fb_ioctl = xxxfb_ioctl,
- .fb_mmap = xxxfb_mmap,
-};
+#endif /* MODULE *?
/* ------------------------------------------------------------------------- */
*/
module_init(xxxfb_init);
-module_exit(xxxfb_cleanup);
+module_exit(xxxfb_remove);
MODULE_LICENSE("GPL");
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff