pata_serverworks: Fix problem with some drive combinations
authorAlan Cox <alan@lxorguk.ukuu.org.uk>
Mon, 5 Nov 2007 15:04:40 +0000 (15:04 +0000)
committerJeff Garzik <jeff@garzik.org>
Mon, 5 Nov 2007 23:08:46 +0000 (18:08 -0500)
The driver used the channel not the device number for deciding where to
load some timing parameters. Also change so that we clear the UDMA field
as the old driver did. Not believed neccessary but does no harm.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/ata/pata_serverworks.c

index df68806df4be195e07295c58e113f60defdcdc7d..8bed888737206cae257c43ae9f0a600568bf91cc 100644 (file)
@@ -274,28 +274,27 @@ static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev
 {
        static const u8 dma_mode[] = { 0x77, 0x21, 0x20 };
        int offset = 1 + 2 * ap->port_no - adev->devno;
-       int devbits = (2 * ap->port_no + adev->devno);
+       int devbits = 2 * ap->port_no + adev->devno;
        u8 ultra;
        u8 ultra_cfg;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
        pci_read_config_byte(pdev, 0x54, &ultra_cfg);
+       pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra);
+       ultra &= ~(0x0F << (adev->devno * 4));
 
        if (adev->dma_mode >= XFER_UDMA_0) {
                pci_write_config_byte(pdev, 0x44 + offset,  0x20);
 
-               pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra);
-               ultra &= ~(0x0F << (ap->port_no * 4));
                ultra |= (adev->dma_mode - XFER_UDMA_0)
-                                       << (ap->port_no * 4);
-               pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra);
-
+                                       << (adev->devno * 4);
                ultra_cfg |=  (1 << devbits);
        } else {
                pci_write_config_byte(pdev, 0x44 + offset,
                        dma_mode[adev->dma_mode - XFER_MW_DMA_0]);
                ultra_cfg &= ~(1 << devbits);
        }
+       pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra);
        pci_write_config_byte(pdev, 0x54, ultra_cfg);
 }