[PATCH] i2c: Fix i2c-elektor on Alpha
authorStig Telfer <stig@lizardlogic.co.uk>
Fri, 7 Oct 2005 22:21:48 +0000 (00:21 +0200)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 28 Oct 2005 21:02:10 +0000 (14:02 -0700)
This patch updates the i2c-elektor driver, enabling it to compile
cleanly, load and run.  The key change is that it uses the new
__iomem/iowrite8/ioread8 functions to abstract the direct or
memory-mapped variants of register access.  Also, the original driver
would crash on module load on the Alpha because the PCI memory region
was not remapped into kernel memory.

I have managed the following testing:

* compiled and tested it on my Alpha UP2000+ system.
* compiles cleanly for x86 but I don't have the hardware to test.

Signed-off-by: Stig Telfer <stig@lizardlogic.co.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/busses/i2c-elektor.c

index 6930b660e508d8c4e4d54ed08f5a45f00bc106d2..75b4b442a63673ac0e9a357fef3a7532e8a36eba 100644 (file)
@@ -46,6 +46,8 @@
 #define DEFAULT_BASE 0x330
 
 static int base;
+static u8 __iomem *base_iomem;
+
 static int irq;
 static int clock  = 0x1c;
 static int own    = 0x55;
@@ -64,36 +66,27 @@ static spinlock_t lock;
 
 static void pcf_isa_setbyte(void *data, int ctl, int val)
 {
-       int address = ctl ? (base + 1) : base;
+       u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
 
        /* enable irq if any specified for serial operation */
        if (ctl && irq && (val & I2C_PCF_ESO)) {
                val |= I2C_PCF_ENI;
        }
 
-       pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255);
-
-       switch (mmapped) {
-       case 0: /* regular I/O */
-               outb(val, address);
-               break;
-       case 2: /* double mapped I/O needed for UP2000 board,
-                   I don't know why this... */
-               writeb(val, (void *)address);
-               /* fall */
-       case 1: /* memory mapped I/O */
-               writeb(val, (void *)address);
-               break;
-       }
+       pr_debug("i2c-elektor: Write %p 0x%02X\n", address, val);
+       iowrite8(val, address);
+#ifdef __alpha__
+       /* API UP2000 needs some hardware fudging to make the write stick */
+       iowrite8(val, address);
+#endif
 }
 
 static int pcf_isa_getbyte(void *data, int ctl)
 {
-       int address = ctl ? (base + 1) : base;
-       int val = mmapped ? readb((void *)address) : inb(address);
-
-       pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val);
+       u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
+       int val = ioread8(address);
 
+       pr_debug("i2c-elektor: Read %p 0x%02X\n", address, val);
        return (val);
 }
 
@@ -155,7 +148,30 @@ static int pcf_isa_init(void)
                               "is in use.\n", base);
                        return -ENODEV;
                }
+               base_iomem = ioport_map(base, 2);
+               if (!base_iomem) {
+                       printk(KERN_ERR "i2c-elektor: remap of I/O region "
+                              "%#x failed\n", base);
+                       release_region(base, 2);
+                       return -ENODEV;
+               }
+       } else {
+               if (!request_mem_region(base, 2, "i2c-elektor")) {
+                       printk(KERN_ERR "i2c-elektor: requested memory region "
+                              "(%#x:2) is in use\n", base);
+                       return -ENODEV;
+               }
+               base_iomem = ioremap(base, 2);
+               if (base_iomem == NULL) {
+                       printk(KERN_ERR "i2c-elektor: remap of memory region "
+                              "%#x failed\n", base);
+                       release_mem_region(base, 2);
+                       return -ENODEV;
+               }
        }
+       pr_debug("i2c-elektor: registers %#x remapped to %p\n", base,
+                base_iomem);
+
        if (irq > 0) {
                if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) {
                        printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq);
@@ -200,7 +216,7 @@ static int __init i2c_pcfisa_init(void)
                cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, 
                                           PCI_DEVICE_ID_CONTAQ_82C693, NULL);
                if (cy693_dev) {
-                       char config;
+                       unsigned char config;
                        /* yeap, we've found cypress, let's check config */
                        if (!pci_read_config_byte(cy693_dev, 0x47, &config)) {
                                
@@ -219,9 +235,7 @@ static int __init i2c_pcfisa_init(void)
                                if ((config & 0x7f) == 0x61) {
                                        /* seems to be UP2000 like board */
                                        base = 0xe0000;
-                                        /* I don't know why we need to
-                                           write twice */
-                                       mmapped = 2;
+                                       mmapped = 1;
                                         /* UP2000 drives ISA with
                                           8.25 MHz (PCI/4) clock
                                           (this can be read from cypress) */
@@ -262,8 +276,13 @@ static int __init i2c_pcfisa_init(void)
                free_irq(irq, NULL);
        }
 
-       if (!mmapped)
+       if (!mmapped) {
+               ioport_unmap(base_iomem);
                release_region(base , 2);
+       } else {
+               iounmap(base_iomem);
+               release_mem_region(base, 2);
+       }
        return -ENODEV;
 }
 
@@ -276,8 +295,13 @@ static void i2c_pcfisa_exit(void)
                free_irq(irq, NULL);
        }
 
-       if (!mmapped)
+       if (!mmapped) {
+               ioport_unmap(base_iomem);
                release_region(base , 2);
+       } else {
+               iounmap(base_iomem);
+               release_mem_region(base, 2);
+       }
 }
 
 MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");