dt-bindings: clock: Move at91.h to dt-bindigs/clock
authorTushar Behera <tushar.behera@linaro.org>
Thu, 6 Mar 2014 06:04:43 +0000 (11:34 +0530)
committerNicolas Ferre <nicolas.ferre@atmel.com>
Fri, 18 Apr 2014 21:44:52 +0000 (23:44 +0200)
Most of the clock related dt-binding header files are located in
dt-bindings/clock folder. It would be good to keep all the similar
header files at a single location.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
CC: Rob Landley <rob@landley.net>
CC: Andrew Victor <linux@maxim.org.za>
CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Acked-by: Boris BREZILLON <b.brezillon.dev@gmail.com>
[nicolas.ferre@atmel.com: add new at91sam9261 & at91sam9rl]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Documentation/devicetree/bindings/clock/at91-clock.txt
arch/arm/boot/dts/at91sam9261.dtsi
arch/arm/boot/dts/at91sam9rl.dtsi
arch/arm/boot/dts/sama5d3.dtsi
arch/arm/boot/dts/sama5d3_mci2.dtsi
arch/arm/boot/dts/sama5d3_tcb1.dtsi
arch/arm/boot/dts/sama5d3_uart.dtsi
include/dt-bindings/clk/at91.h [deleted file]
include/dt-bindings/clock/at91.h [new file with mode: 0644]

index cd5e23912888cf4350750fe0adc908fb895e3d08..6794cdc96d8fdf44513a4ad2310fe67a2a93712d 100644 (file)
@@ -62,7 +62,7 @@ Required properties for PMC node:
 - interrupt-controller : tell that the PMC is an interrupt controller.
 - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
        and reflect the bit position in the PMC_ER/DR/SR registers.
-       You can use the dt macros defined in dt-bindings/clk/at91.h.
+       You can use the dt macros defined in dt-bindings/clock/at91.h.
        0 (AT91_PMC_MOSCS) -> main oscillator ready
        1 (AT91_PMC_LOCKA) -> PLL A ready
        2 (AT91_PMC_LOCKB) -> PLL B ready
index e21dda0e8986574b2531c1675eca1b4de164822d..3be973e9889a2b0ef29cc45657ad6eeb056e7f5f 100644 (file)
@@ -10,7 +10,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
        model = "Atmel AT91SAM9261 family SoC";
index 63e1784d272c556974023fcfd7d46ba7a0510e3d..92a52faebef77cd8eda572d11504c0f83362a428 100644 (file)
@@ -8,7 +8,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 
index eabcfdbb403acc7ff40b409617a53c9831414c04..a106b0872910da874f1000f417a1aab1793237de 100644 (file)
@@ -13,7 +13,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
        model = "Atmel SAMA5D3 family SoC";
index b029fe7ef17a657946de4d2fe71168b4b03210d8..1b02208ea6ff2b70aab43ddd416b37ef0b9a2a1f 100644 (file)
@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
        ahb {
index 382b04431f66b621e01a9f2fe7a9e488ac4c171b..02848453ca0cf5447de27aaca6b233611173da4e 100644 (file)
@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
        aliases {
index a9fa75e4165205f9a1259f9a0821519faee54070..7a8d4c6115f72fdab533980a0f0d96eb6cb1469a 100644 (file)
@@ -9,7 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
        aliases {
diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clk/at91.h
deleted file mode 100644 (file)
index 0b4cb99..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This header provides constants for AT91 pmc status.
- *
- * The constants defined in this header are being used in dts.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef _DT_BINDINGS_CLK_AT91_H
-#define _DT_BINDINGS_CLK_AT91_H
-
-#define AT91_PMC_MOSCS         0               /* MOSCS Flag */
-#define AT91_PMC_LOCKA         1               /* PLLA Lock */
-#define AT91_PMC_LOCKB         2               /* PLLB Lock */
-#define AT91_PMC_MCKRDY                3               /* Master Clock */
-#define AT91_PMC_LOCKU         6               /* UPLL Lock */
-#define AT91_PMC_PCKRDY(id)    (8 + (id))      /* Programmable Clock */
-#define AT91_PMC_MOSCSELS      16              /* Main Oscillator Selection */
-#define AT91_PMC_MOSCRCS       17              /* Main On-Chip RC */
-#define AT91_PMC_CFDEV         18              /* Clock Failure Detector Event */
-
-#endif
diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h
new file mode 100644 (file)
index 0000000..0b4cb99
--- /dev/null
@@ -0,0 +1,22 @@
+/*
+ * This header provides constants for AT91 pmc status.
+ *
+ * The constants defined in this header are being used in dts.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef _DT_BINDINGS_CLK_AT91_H
+#define _DT_BINDINGS_CLK_AT91_H
+
+#define AT91_PMC_MOSCS         0               /* MOSCS Flag */
+#define AT91_PMC_LOCKA         1               /* PLLA Lock */
+#define AT91_PMC_LOCKB         2               /* PLLB Lock */
+#define AT91_PMC_MCKRDY                3               /* Master Clock */
+#define AT91_PMC_LOCKU         6               /* UPLL Lock */
+#define AT91_PMC_PCKRDY(id)    (8 + (id))      /* Programmable Clock */
+#define AT91_PMC_MOSCSELS      16              /* Main Oscillator Selection */
+#define AT91_PMC_MOSCRCS       17              /* Main On-Chip RC */
+#define AT91_PMC_CFDEV         18              /* Clock Failure Detector Event */
+
+#endif