ARM: mx35_3ds: Add I2C support

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 4f57f13c028ce875bcf23afc3982958adfcbf4de..8b4b097bea3e57f5c5c4087ff37d6e5f0c929245 100644 (file)
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -183,6 +183,7 @@ config MACH_MX35_3DS
        select MXC_DEBUG_BOARD
        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
        select IMX_HAVE_PLATFORM_IMX2_WDT
+       select IMX_HAVE_PLATFORM_IMX_I2C
        select IMX_HAVE_PLATFORM_IMX_UART
        select IMX_HAVE_PLATFORM_MXC_EHCI
        select IMX_HAVE_PLATFORM_MXC_NAND

diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index be12ac1d1954ba030a4a98458c70511bb0747a81..5f35d5c88f199589d26f762fac829a44d27733a5 100644 (file)
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -118,6 +118,9 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
        MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
        MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
        MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+       /* I2C1 */
+       MX35_PAD_I2C1_CLK__I2C1_SCL,
+       MX35_PAD_I2C1_DAT__I2C1_SDA,
 };
 
 static int mx35_3ds_otg_init(struct platform_device *pdev)
@@ -163,6 +166,10 @@ static int __init mx35_3ds_otg_mode(char *options)
 }
 __setup("otg_mode=", mx35_3ds_otg_mode);
 
+static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
+       .bitrate = 100000,
+};
+
 /*
  * Board specific initialization.
  */
@@ -190,6 +197,7 @@ static void __init mx35_3ds_init(void)
        if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
                pr_warn("Init of the debugboard failed, all "
                                "devices on the debugboard are unusable.\n");
+       imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
 }
 
 static void __init mx35pdk_timer_init(void)