- fsl,irda-mode : Indicate the uart supports irda mode
- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
in DCE mode by default.
-- fsl,dma-size : Indicate the size of the DMA buffer and its periods
Please check Documentation/devicetree/bindings/serial/serial.txt
for the complete list of generic properties.
interrupts = <31>;
uart-has-rtscts;
fsl,dte-mode;
- fsl,dma-size = <1024 4>;
};
#define UART_NR 8
-/* RX DMA buffer periods */
-#define RX_DMA_PERIODS 4
-#define RX_BUF_SIZE (PAGE_SIZE)
-
-
/* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */
enum imx_uart_type {
IMX1_UART,
struct dma_chan *dma_chan_rx, *dma_chan_tx;
struct scatterlist rx_sgl, tx_sgl[2];
void *rx_buf;
- unsigned int rx_buf_size;
struct circ_buf rx_ring;
unsigned int rx_periods;
dma_cookie_t rx_cookie;
}
}
+#define RX_BUF_SIZE (PAGE_SIZE)
+
/*
* There are two kinds of RX DMA interrupts(such as in the MX6Q):
* [1] the RX DMA buffer is full.
}
}
+/* RX DMA buffer periods */
+#define RX_DMA_PERIODS 4
+
static int start_rx_dma(struct imx_port *sport)
{
struct scatterlist *sgl = &sport->rx_sgl;
sport->rx_ring.head = 0;
sport->rx_ring.tail = 0;
+ sport->rx_periods = RX_DMA_PERIODS;
- sg_init_one(sgl, sport->rx_buf, sport->rx_buf_size);
+ sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE);
ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE);
if (ret == 0) {
dev_err(dev, "DMA mapping error for RX.\n");
goto err;
}
- sport->rx_buf = kzalloc(sport->rx_buf_size, GFP_KERNEL);
+ sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!sport->rx_buf) {
ret = -ENOMEM;
goto err;
{
struct device_node *np = pdev->dev.of_node;
int ret;
- u32 dma_buf_size[2];
sport->devdata = of_device_get_match_data(&pdev->dev);
if (!sport->devdata)
if (of_get_property(np, "rts-gpios", NULL))
sport->have_rtsgpio = 1;
- if (!of_property_read_u32_array(np, "fsl,dma-size", dma_buf_size, 2)) {
- sport->rx_buf_size = dma_buf_size[0] * dma_buf_size[1];
- sport->rx_periods = dma_buf_size[1];
- } else {
- sport->rx_buf_size = RX_BUF_SIZE;
- sport->rx_periods = RX_DMA_PERIODS;
- }
-
return 0;
}
#else