rtl8187: feedback transmitted packets using tx close descriptor for 8187B
authorHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Thu, 13 Nov 2008 15:39:16 +0000 (10:39 -0500)
committerJohn W. Linville <linville@tuxdriver.com>
Tue, 25 Nov 2008 21:41:33 +0000 (16:41 -0500)
Realtek 8187B has a receive command queue to feedback beacon interrupt
and transmitted packet status. Use it to feedback mac80211 about status
of transmitted packets. Unfortunately in the course of testing I found
that the sequence number reported by hardware includes entire sequence
control in a 12 bit only field, so a workaround is done to check only
lowest bits.

Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/rtl818x/rtl8187.h
drivers/net/wireless/rtl818x/rtl8187_dev.c

index f09872eec3d5adad55f477aa589c5e6d992e2de8..c385407a9941e4ba7b5a275070f7ccb4e72d6785 100644 (file)
@@ -113,6 +113,11 @@ struct rtl8187_priv {
        u8 noise;
        u8 slot_time;
        u8 aifsn[4];
+       struct {
+               __le64 buf;
+               struct urb *urb;
+               struct sk_buff_head queue;
+       } b_tx_status;
 };
 
 void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
index cb5bcefd1c3ea6c1c8e22c033e284f2b9c00027a..876d4f93d31009bb90ba00a46b0dc8416c87fb09 100644 (file)
@@ -176,8 +176,27 @@ static void rtl8187_tx_cb(struct urb *urb)
        skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) :
                                          sizeof(struct rtl8187_tx_hdr));
        ieee80211_tx_info_clear_status(info);
-       info->flags |= IEEE80211_TX_STAT_ACK;
-       ieee80211_tx_status_irqsafe(hw, skb);
+
+       if (!urb->status &&
+           !(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+           priv->is_rtl8187b) {
+               skb_queue_tail(&priv->b_tx_status.queue, skb);
+
+               /* queue is "full", discard last items */
+               while (skb_queue_len(&priv->b_tx_status.queue) > 5) {
+                       struct sk_buff *old_skb;
+
+                       dev_dbg(&priv->udev->dev,
+                               "transmit status queue full\n");
+
+                       old_skb = skb_dequeue(&priv->b_tx_status.queue);
+                       ieee80211_tx_status_irqsafe(hw, old_skb);
+               }
+       } else {
+               if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !urb->status)
+                       info->flags |= IEEE80211_TX_STAT_ACK;
+               ieee80211_tx_status_irqsafe(hw, skb);
+       }
 }
 
 static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
@@ -219,7 +238,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
                hdr->flags = cpu_to_le32(flags);
                hdr->len = 0;
                hdr->rts_duration = rts_dur;
-               hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
+               hdr->retry = cpu_to_le32(info->control.rates[0].count << 8);
                buf = hdr;
 
                ep = 2;
@@ -237,7 +256,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
                memset(hdr, 0, sizeof(*hdr));
                hdr->flags = cpu_to_le32(flags);
                hdr->rts_duration = rts_dur;
-               hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
+               hdr->retry = cpu_to_le32(info->control.rates[0].count << 8);
                hdr->tx_duration =
                        ieee80211_generic_frame_duration(dev, priv->vif,
                                                         skb->len, txrate);
@@ -403,6 +422,109 @@ static int rtl8187_init_urbs(struct ieee80211_hw *dev)
        return 0;
 }
 
+static void rtl8187b_status_cb(struct urb *urb)
+{
+       struct ieee80211_hw *hw = (struct ieee80211_hw *)urb->context;
+       struct rtl8187_priv *priv = hw->priv;
+       u64 val;
+       unsigned int cmd_type;
+
+       if (unlikely(urb->status)) {
+               usb_free_urb(urb);
+               return;
+       }
+
+       /*
+        * Read from status buffer:
+        *
+        * bits [30:31] = cmd type:
+        * - 0 indicates tx beacon interrupt
+        * - 1 indicates tx close descriptor
+        *
+        * In the case of tx beacon interrupt:
+        * [0:9] = Last Beacon CW
+        * [10:29] = reserved
+        * [30:31] = 00b
+        * [32:63] = Last Beacon TSF
+        *
+        * If it's tx close descriptor:
+        * [0:7] = Packet Retry Count
+        * [8:14] = RTS Retry Count
+        * [15] = TOK
+        * [16:27] = Sequence No
+        * [28] = LS
+        * [29] = FS
+        * [30:31] = 01b
+        * [32:47] = unused (reserved?)
+        * [48:63] = MAC Used Time
+        */
+       val = le64_to_cpu(priv->b_tx_status.buf);
+
+       cmd_type = (val >> 30) & 0x3;
+       if (cmd_type == 1) {
+               unsigned int pkt_rc, seq_no;
+               bool tok;
+               struct sk_buff *skb;
+               struct ieee80211_hdr *ieee80211hdr;
+               unsigned long flags;
+
+               pkt_rc = val & 0xFF;
+               tok = val & (1 << 15);
+               seq_no = (val >> 16) & 0xFFF;
+
+               spin_lock_irqsave(&priv->b_tx_status.queue.lock, flags);
+               skb_queue_reverse_walk(&priv->b_tx_status.queue, skb) {
+                       ieee80211hdr = (struct ieee80211_hdr *)skb->data;
+
+                       /*
+                        * While testing, it was discovered that the seq_no
+                        * doesn't actually contains the sequence number.
+                        * Instead of returning just the 12 bits of sequence
+                        * number, hardware is returning entire sequence control
+                        * (fragment number plus sequence number) in a 12 bit
+                        * only field overflowing after some time. As a
+                        * workaround, just consider the lower bits, and expect
+                        * it's unlikely we wrongly ack some sent data
+                        */
+                       if ((le16_to_cpu(ieee80211hdr->seq_ctrl)
+                           & 0xFFF) == seq_no)
+                               break;
+               }
+               if (skb != (struct sk_buff *) &priv->b_tx_status.queue) {
+                       struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+                       __skb_unlink(skb, &priv->b_tx_status.queue);
+                       if (tok)
+                               info->flags |= IEEE80211_TX_STAT_ACK;
+                       info->status.rates[0].count = pkt_rc;
+
+                       ieee80211_tx_status_irqsafe(hw, skb);
+               }
+               spin_unlock_irqrestore(&priv->b_tx_status.queue.lock, flags);
+       }
+
+       usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static int rtl8187b_init_status_urb(struct ieee80211_hw *dev)
+{
+       struct rtl8187_priv *priv = dev->priv;
+       struct urb *entry;
+
+       entry = usb_alloc_urb(0, GFP_KERNEL);
+       if (!entry)
+               return -ENOMEM;
+       priv->b_tx_status.urb = entry;
+
+       usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, 9),
+                         &priv->b_tx_status.buf, sizeof(priv->b_tx_status.buf),
+                         rtl8187b_status_cb, dev);
+
+       usb_submit_urb(entry, GFP_KERNEL);
+
+       return 0;
+}
+
 static int rtl8187_cmd_reset(struct ieee80211_hw *dev)
 {
        struct rtl8187_priv *priv = dev->priv;
@@ -755,6 +877,7 @@ static int rtl8187_start(struct ieee80211_hw *dev)
                                  (7 << 0  /* long retry limit */) |
                                  (7 << 21 /* MAX TX DMA */));
                rtl8187_init_urbs(dev);
+               rtl8187b_init_status_urb(dev);
                mutex_unlock(&priv->conf_mutex);
                return 0;
        }
@@ -831,6 +954,9 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
                usb_kill_urb(info->urb);
                kfree_skb(skb);
        }
+       while ((skb = skb_dequeue(&priv->b_tx_status.queue)))
+               dev_kfree_skb_any(skb);
+       usb_kill_urb(priv->b_tx_status.urb);
        mutex_unlock(&priv->conf_mutex);
 }
 
@@ -1317,6 +1443,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
                goto err_free_dev;
        }
        mutex_init(&priv->conf_mutex);
+       skb_queue_head_init(&priv->b_tx_status.queue);
 
        printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s\n",
               wiphy_name(dev->wiphy), dev->wiphy->perm_addr,