if (rc == PCI_SLOT_ALREADY_UP) {
- dev_dbg(slot->pci_bus->self, "is already active\n");
+ dev_dbg(&slot->pci_bus->self->dev, "is already active\n");
return 1; /* return 1 to user */
}
if (rc == PCI_L1_ERR) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"L1 failure %d with message: %s",
resp.resp_sub_errno, resp.resp_l1_msg);
return -EPERM;
}
if (rc) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"insert failed with error %d sub-error %d\n",
rc, resp.resp_sub_errno);
return -EIO;
if ((action == PCI_REQ_SLOT_ELIGIBLE) &&
(rc == PCI_SLOT_ALREADY_DOWN)) {
- dev_dbg(slot->pci_bus->self, "Slot %s already inactive\n");
+ dev_dbg(&slot->pci_bus->self->dev, "Slot %s already inactive\n", slot->physical_path);
return 1; /* return 1 to user */
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_EMPTY_33MHZ)) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"Cannot remove last 33MHz card\n");
return -EPERM;
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_L1_ERR)) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"L1 failure %d with message \n%s\n",
resp.resp_sub_errno, resp.resp_l1_msg);
return -EPERM;
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && rc) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"remove failed with error %d sub-error %d\n",
rc, resp.resp_sub_errno);
return -EIO;
if ((action == PCI_REQ_SLOT_DISABLE) && !rc) {
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
pcibus_info->pbi_enabled_devices &= ~(1 << device_num);
- dev_dbg(slot->pci_bus->self, "remove successful\n");
+ dev_dbg(&slot->pci_bus->self->dev, "remove successful\n");
return 0;
}
if ((action == PCI_REQ_SLOT_DISABLE) && rc) {
- dev_dbg(slot->pci_bus->self,"remove failed rc = %d\n", rc);
+ dev_dbg(&slot->pci_bus->self->dev,"remove failed rc = %d\n", rc);
}
return rc;
num_funcs = pci_scan_slot(slot->pci_bus,
PCI_DEVFN(slot->device_num + 1, 0));
if (!num_funcs) {
- dev_dbg(slot->pci_bus->self, "no device in slot\n");
+ dev_dbg(&slot->pci_bus->self->dev, "no device in slot\n");
mutex_unlock(&sn_hotplug_mutex);
return -ENODEV;
}
phandle = PCI_CONTROLLER(slot->pci_bus)->acpi_handle;
if (acpi_bus_get_device(phandle, &pdevice)) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"no parent device, assuming NULL\n");
pdevice = NULL;
}
mutex_unlock(&sn_hotplug_mutex);
if (rc == 0)
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"insert operation successful\n");
else
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"insert operation failed rc = %d\n", rc);
return rc;
if (rc)
goto register_err;
}
- dev_dbg(pci_bus->self, "Registered bus with hotplug\n");
+ dev_dbg(&pci_bus->self->dev, "Registered bus with hotplug\n");
return rc;
register_err:
- dev_dbg(pci_bus->self, "bus failed to register with err = %d\n",
+ dev_dbg(&pci_bus->self->dev, "bus failed to register with err = %d\n",
rc);
alloc_err:
if (rc == -ENOMEM)
- dev_dbg(pci_bus->self, "Memory allocation error\n");
+ dev_dbg(&pci_bus->self->dev, "Memory allocation error\n");
/* destroy THIS element */
if (bss_hotplug_slot)
rc = sn_pci_bus_valid(pci_bus);
if (rc != 1) {
- dev_dbg(pci_bus->self, "not a valid hotplug bus\n");
+ dev_dbg(&pci_bus->self->dev, "not a valid hotplug bus\n");
continue;
}
- dev_dbg(pci_bus->self, "valid hotplug bus\n");
+ dev_dbg(&pci_bus->self->dev, "valid hotplug bus\n");
rc = sn_hotplug_slot_register(pci_bus);
if (!rc) {