[POWERPC] Add initial iomega StorCenter board port.
authorJon Loeliger <jdl@jdl.com>
Wed, 23 Jan 2008 18:42:50 +0000 (12:42 -0600)
committerKumar Gala <galak@kernel.crashing.org>
Thu, 24 Jan 2008 01:54:36 +0000 (19:54 -0600)
Use cuImage bootwrapper until U-Boot port is completed.
Derived heavily from Linkstation port.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Wilcox <andy@protium.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/boot/Makefile
arch/powerpc/boot/cuboot-824x.c [new file with mode: 0644]
arch/powerpc/platforms/embedded6xx/Kconfig
arch/powerpc/platforms/embedded6xx/Makefile
arch/powerpc/platforms/embedded6xx/storcenter.c [new file with mode: 0644]

index fcca455a8c02a67e127c2710005fdb1a73ce5671..1e20aca48f459f3a1d1ba518f030cbea71ebafb9 100644 (file)
@@ -57,7 +57,7 @@ src-wlib := string.S crt0.S stdio.c main.c \
                4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
                cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
                fsl-soc.c mpc8xx.c pq2.c
-src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \
+src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
                cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
                ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
                cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
@@ -197,6 +197,7 @@ image-$(CONFIG_EP405)                       += zImage.ep405
 image-$(CONFIG_8260)                   += cuImage.pq2
 image-$(CONFIG_EP8248E)                        += zImage.ep8248e
 image-$(CONFIG_PPC_MPC52xx)            += cuImage.52xx
+image-$(CONFIG_STORCENTER)             += cuImage.824x
 image-$(CONFIG_PPC_83xx)               += cuImage.83xx
 image-$(CONFIG_PPC_85xx)               += cuImage.85xx
 image-$(CONFIG_MPC7448HPC2)            += cuImage.hpc2
diff --git a/arch/powerpc/boot/cuboot-824x.c b/arch/powerpc/boot/cuboot-824x.c
new file mode 100644 (file)
index 0000000..ced90c5
--- /dev/null
@@ -0,0 +1,53 @@
+/*
+ * Old U-boot compatibility for 824x
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "cuboot.h"
+
+#define TARGET_824x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+
+static void platform_fixups(void)
+{
+       void *soc;
+
+       dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+       dt_fixup_mac_addresses(bd.bi_enetaddr);
+       dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
+
+       soc = find_node_by_devtype(NULL, "soc");
+       if (soc) {
+               void *serial = NULL;
+
+               setprop(soc, "bus-frequency", &bd.bi_busfreq,
+                       sizeof(bd.bi_busfreq));
+
+               while ((serial = find_node_by_devtype(serial, "serial"))) {
+                       if (get_parent(serial) != soc)
+                               continue;
+
+                       setprop(serial, "clock-frequency", &bd.bi_busfreq,
+                               sizeof(bd.bi_busfreq));
+               }
+       }
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+       CUBOOT_INIT();
+       fdt_init(_dtb_start);
+       serial_console_init();
+       platform_ops.fixups = platform_fixups;
+}
index 8924095a792888f3940b1d6a1e5340b303ddbf7b..6c80837579382badd588363534730727377411f6 100644 (file)
@@ -9,6 +9,8 @@ config LINKSTATION
        select FSL_SOC
        select PPC_UDBG_16550 if SERIAL_8250
        select DEFAULT_UIMAGE
+       select MPC10X_OPENPIC
+       select MPC10X_BRIDGE
        help
          Select LINKSTATION if configuring for one of PPC- (MPC8241)
          based NAS systems from Buffalo Technology. So far only
@@ -16,6 +18,19 @@ config LINKSTATION
          Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
          Terastation systems should be supported too.
 
+config STORCENTER
+       bool "IOMEGA StorCenter"
+       depends on EMBEDDED6xx
+       select MPIC
+       select FSL_SOC
+       select PPC_UDBG_16550 if SERIAL_8250
+       select WANT_DEVICE_TREE
+       select MPC10X_OPENPIC
+       select MPC10X_BRIDGE
+       help
+         Select STORCENTER if configuring for the iomega StorCenter
+         with an 8241 CPU in it.
+
 config MPC7448HPC2
        bool "Freescale MPC7448HPC2(Taiga)"
        depends on EMBEDDED6xx
@@ -23,6 +38,7 @@ config MPC7448HPC2
        select DEFAULT_UIMAGE
        select PPC_UDBG_16550
        select WANT_DEVICE_TREE
+       select TSI108_BRIDGE
        help
          Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
          platform
@@ -33,6 +49,7 @@ config PPC_HOLLY
        select TSI108_BRIDGE
        select PPC_UDBG_16550
        select WANT_DEVICE_TREE
+       select TSI108_BRIDGE
        help
          Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
          Board with TSI108/9 bridge (Hickory/Holly)
@@ -48,17 +65,13 @@ config PPC_PRPMC2800
 
 config TSI108_BRIDGE
        bool
-       depends on MPC7448HPC2 || PPC_HOLLY
        select PCI
        select MPIC
        select MPIC_WEIRD
-       default y
 
 config MPC10X_BRIDGE
        bool
-       depends on LINKSTATION
        select PPC_INDIRECT_PCI
-       default y
 
 config MV64X60
        bool
@@ -67,8 +80,6 @@ config MV64X60
 
 config MPC10X_OPENPIC
        bool
-       depends on LINKSTATION
-       default y
 
 config MPC10X_STORE_GATHERING
        bool "Enable MPC10x store gathering"
index 844947cfc5db6728dcfe14a03b9b1c1b19513351..06524d3ffd2ef2bbbbdec0f0c06c54641956c579 100644 (file)
@@ -3,5 +3,6 @@
 #
 obj-$(CONFIG_MPC7448HPC2)      += mpc7448_hpc2.o
 obj-$(CONFIG_LINKSTATION)      += linkstation.o ls_uart.o
+obj-$(CONFIG_STORCENTER)       += storcenter.o
 obj-$(CONFIG_PPC_HOLLY)                += holly.o
 obj-$(CONFIG_PPC_PRPMC2800)    += prpmc2800.o
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
new file mode 100644 (file)
index 0000000..e12e9d2
--- /dev/null
@@ -0,0 +1,192 @@
+/*
+ * Board setup routines for the storcenter
+ *
+ * Copyright 2007 (C) Oyvind Repvik (nail@nslu2-linux.org)
+ * Copyright 2007 Andy Wilcox, Jon Loeliger
+ *
+ * Based on linkstation.c by G. Liakhovetski
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of
+ * any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/initrd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/mpic.h>
+#include <asm/pci-bridge.h>
+
+#include "mpc10x.h"
+
+
+#ifdef CONFIG_MTD_PHYSMAP
+static struct mtd_partition storcenter_physmap_partitions[] = {
+       {
+               .name   = "kernel",
+               .offset = 0x000000,
+               .size   = 0x170000,
+       },
+       {
+               .name   = "rootfs",
+               .offset = 0x170000,
+               .size   = 0x590000,
+       },
+       {
+               .name   = "uboot",
+               .offset = 0x700000,
+               .size   = 0x040000,
+       },
+       {
+               .name   = "config",
+               .offset = 0x740000,
+               .size   = 0x0c0000,
+       },
+};
+#endif
+
+
+static __initdata struct of_device_id storcenter_of_bus[] = {
+       { .name = "soc", },
+       {},
+};
+
+static int __init storcenter_device_probe(void)
+{
+       of_platform_bus_probe(NULL, storcenter_of_bus, NULL);
+       return 0;
+}
+machine_device_initcall(storcenter, storcenter_device_probe);
+
+
+static int __init storcenter_add_bridge(struct device_node *dev)
+{
+#ifdef CONFIG_PCI
+       int len;
+       struct pci_controller *hose;
+       const int *bus_range;
+
+       printk("Adding PCI host bridge %s\n", dev->full_name);
+
+       hose = pcibios_alloc_controller(dev);
+       if (hose == NULL)
+               return -ENOMEM;
+
+       bus_range = of_get_property(dev, "bus-range", &len);
+       hose->first_busno = bus_range ? bus_range[0] : 0;
+       hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+       setup_indirect_pci(hose, MPC10X_MAPB_CNFG_ADDR, MPC10X_MAPB_CNFG_DATA, 0);
+
+       /* Interpret the "ranges" property */
+       /* This also maps the I/O region and sets isa_io/mem_base */
+       pci_process_bridge_OF_ranges(hose, dev, 1);
+#endif
+
+       return 0;
+}
+
+static void __init storcenter_setup_arch(void)
+{
+       struct device_node *np;
+
+#ifdef CONFIG_MTD_PHYSMAP
+       physmap_set_partitions(storcenter_physmap_partitions,
+                              ARRAY_SIZE(storcenter_physmap_partitions));
+#endif
+
+       /* Lookup PCI host bridges */
+       for_each_compatible_node(np, "pci", "mpc10x-pci")
+               storcenter_add_bridge(np);
+
+       printk(KERN_INFO "IOMEGA StorCenter\n");
+}
+
+/*
+ * Interrupt setup and service.  Interrrupts on the turbostation come
+ * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
+ */
+static void __init storcenter_init_IRQ(void)
+{
+       struct mpic *mpic;
+       struct device_node *dnp;
+       const void *prop;
+       int size;
+       phys_addr_t paddr;
+
+       dnp = of_find_node_by_type(NULL, "open-pic");
+       if (dnp == NULL)
+               return;
+
+       prop = of_get_property(dnp, "reg", &size);
+       if (prop == NULL) {
+               of_node_put(dnp);
+               return;
+       }
+
+       paddr = (phys_addr_t)of_translate_address(dnp, prop);
+       mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
+                       4, 32, " EPIC     ");
+
+       of_node_put(dnp);
+
+       BUG_ON(mpic == NULL);
+
+       /* PCI IRQs */
+       /*
+        * 2.6.12 patch:
+        *         openpic_set_sources(0, 5, OpenPIC_Addr + 0x10200);
+        *         openpic_set_sources(5, 2, OpenPIC_Addr + 0x11120);
+        *         first_irq, num_irqs, __iomem first_ISR
+        *         o_ss: i, src: 0, fdf50200
+        *         o_ss: i, src: 1, fdf50220
+        *         o_ss: i, src: 2, fdf50240
+        *         o_ss: i, src: 3, fdf50260
+        *         o_ss: i, src: 4, fdf50280
+        *         o_ss: i, src: 5, fdf51120
+        *         o_ss: i, src: 6, fdf51140
+        */
+       mpic_assign_isu(mpic, 0, paddr + 0x10200);
+       mpic_assign_isu(mpic, 1, paddr + 0x10220);
+       mpic_assign_isu(mpic, 2, paddr + 0x10240);
+       mpic_assign_isu(mpic, 3, paddr + 0x10260);
+       mpic_assign_isu(mpic, 4, paddr + 0x10280);
+       mpic_assign_isu(mpic, 5, paddr + 0x11120);
+       mpic_assign_isu(mpic, 6, paddr + 0x11140);
+
+       mpic_init(mpic);
+}
+
+static void storcenter_restart(char *cmd)
+{
+       local_irq_disable();
+
+       /* Set exception prefix high - to the firmware */
+       _nmask_and_or_msr(0, MSR_IP);
+
+       /* Wait for reset to happen */
+       for (;;) ;
+}
+
+static int __init storcenter_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       return of_flat_dt_is_compatible(root, "storcenter");
+}
+
+define_machine(storcenter){
+       .name                   = "IOMEGA StorCenter",
+       .probe                  = storcenter_probe,
+       .setup_arch             = storcenter_setup_arch,
+       .init_IRQ               = storcenter_init_IRQ,
+       .get_irq                = mpic_get_irq,
+       .restart                = storcenter_restart,
+       .calibrate_decr         = generic_calibrate_decr,
+};