ARM: at91: add Atmel ISI and ov2640 support on sam9m10g45 board
authorJosh Wu <josh.wu@atmel.com>
Sat, 22 Oct 2011 07:17:40 +0000 (15:17 +0800)
committerNicolas Ferre <nicolas.ferre@atmel.com>
Fri, 3 Feb 2012 12:45:17 +0000 (13:45 +0100)
This patch adds:
- ov2640 sensor in at91sam9m10g45ek board
- support to use PCK as ISI_MCK. PCK's parent is managed at
  SoC level, e.g. at91sam9g45_devices.c

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
arch/arm/mach-at91/at91sam9g45_devices.c
arch/arm/mach-at91/board-sam9m10g45ek.c

index 96e2adcd5a841907be15beda7bdbb67dd87b5259..bd4e68cd3e2f31d43c982a03f405c544cabb926a 100644 (file)
@@ -14,6 +14,7 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
+#include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 #include <linux/atmel-mci.h>
 #include <mach/at_hdmac.h>
 #include <mach/atmel-mci.h>
 
+#include <media/atmel-isi.h>
+
 #include "generic.h"
+#include "clock.h"
 
 
 /* --------------------------------------------------------------------
@@ -870,6 +874,96 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  Image Sensor Interface
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
+static u64 isi_dmamask = DMA_BIT_MASK(32);
+static struct isi_platform_data isi_data;
+
+struct resource isi_resources[] = {
+       [0] = {
+               .start  = AT91SAM9G45_BASE_ISI,
+               .end    = AT91SAM9G45_BASE_ISI + SZ_16K - 1,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = AT91SAM9G45_ID_ISI,
+               .end    = AT91SAM9G45_ID_ISI,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device at91sam9g45_isi_device = {
+       .name           = "atmel_isi",
+       .id             = 0,
+       .dev            = {
+                       .dma_mask               = &isi_dmamask,
+                       .coherent_dma_mask      = DMA_BIT_MASK(32),
+                       .platform_data          = &isi_data,
+       },
+       .resource       = isi_resources,
+       .num_resources  = ARRAY_SIZE(isi_resources),
+};
+
+static struct clk_lookup isi_mck_lookups[] = {
+       CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
+};
+
+void __init at91_add_device_isi(struct isi_platform_data *data,
+               bool use_pck_as_mck)
+{
+       struct clk *pck;
+       struct clk *parent;
+
+       if (!data)
+               return;
+       isi_data = *data;
+
+       at91_set_A_periph(AT91_PIN_PB20, 0);    /* ISI_D0 */
+       at91_set_A_periph(AT91_PIN_PB21, 0);    /* ISI_D1 */
+       at91_set_A_periph(AT91_PIN_PB22, 0);    /* ISI_D2 */
+       at91_set_A_periph(AT91_PIN_PB23, 0);    /* ISI_D3 */
+       at91_set_A_periph(AT91_PIN_PB24, 0);    /* ISI_D4 */
+       at91_set_A_periph(AT91_PIN_PB25, 0);    /* ISI_D5 */
+       at91_set_A_periph(AT91_PIN_PB26, 0);    /* ISI_D6 */
+       at91_set_A_periph(AT91_PIN_PB27, 0);    /* ISI_D7 */
+       at91_set_A_periph(AT91_PIN_PB28, 0);    /* ISI_PCK */
+       at91_set_A_periph(AT91_PIN_PB30, 0);    /* ISI_HSYNC */
+       at91_set_A_periph(AT91_PIN_PB29, 0);    /* ISI_VSYNC */
+       at91_set_B_periph(AT91_PIN_PB8, 0);     /* ISI_PD8 */
+       at91_set_B_periph(AT91_PIN_PB9, 0);     /* ISI_PD9 */
+       at91_set_B_periph(AT91_PIN_PB10, 0);    /* ISI_PD10 */
+       at91_set_B_periph(AT91_PIN_PB11, 0);    /* ISI_PD11 */
+
+       platform_device_register(&at91sam9g45_isi_device);
+
+       if (use_pck_as_mck) {
+               at91_set_B_periph(AT91_PIN_PB31, 0);    /* ISI_MCK (PCK1) */
+
+               pck = clk_get(NULL, "pck1");
+               parent = clk_get(NULL, "plla");
+
+               BUG_ON(IS_ERR(pck) || IS_ERR(parent));
+
+               if (clk_set_parent(pck, parent)) {
+                       pr_err("Failed to set PCK's parent\n");
+               } else {
+                       /* Register PCK as ISI_MCK */
+                       isi_mck_lookups[0].clk = pck;
+                       clkdev_add_table(isi_mck_lookups,
+                                       ARRAY_SIZE(isi_mck_lookups));
+               }
+
+               clk_put(pck);
+               clk_put(parent);
+       }
+}
+#else
+void __init at91_add_device_isi(struct isi_platform_data *data,
+               bool use_pck_as_mck) {}
+#endif
+
 
 /* --------------------------------------------------------------------
  *  LCD Controller
index ea0d1b9c2b7bd0327326a227509f7d4f1c896263..57497e2b8878cc11e34e95f4245674a81aa9b45f 100644 (file)
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/leds.h>
-#include <linux/clk.h>
 #include <linux/atmel-mci.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
+#include <media/soc_camera.h>
+#include <media/atmel-isi.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -184,6 +186,71 @@ static void __init ek_add_device_nand(void)
 }
 
 
+/*
+ *  ISI
+ */
+static struct isi_platform_data __initdata isi_data = {
+       .frate                  = ISI_CFG1_FRATE_CAPTURE_ALL,
+       /* to use codec and preview path simultaneously */
+       .full_mode              = 1,
+       .data_width_flags       = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
+       /* ISI_MCK is provided by programmable clock or external clock */
+       .mck_hz                 = 25000000,
+};
+
+
+/*
+ * soc-camera OV2640
+ */
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+       defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
+{
+       /* ISI board for ek using default 8-bits connection */
+       return SOCAM_DATAWIDTH_8;
+}
+
+static int i2c_camera_power(struct device *dev, int on)
+{
+       /* enable or disable the camera */
+       pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+       at91_set_gpio_output(AT91_PIN_PD13, !on);
+
+       if (!on)
+               goto out;
+
+       /* If enabled, give a reset impulse */
+       at91_set_gpio_output(AT91_PIN_PD12, 0);
+       msleep(20);
+       at91_set_gpio_output(AT91_PIN_PD12, 1);
+       msleep(100);
+
+out:
+       return 0;
+}
+
+static struct i2c_board_info i2c_camera = {
+       I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+       .bus_id                 = 0,
+       .board_info             = &i2c_camera,
+       .i2c_adapter_id         = 0,
+       .power                  = i2c_camera_power,
+       .query_bus_param        = isi_camera_query_bus_param,
+};
+
+static struct platform_device isi_ov2640 = {
+       .name   = "soc-camera-pdrv",
+       .id     = 0,
+       .dev    = {
+               .platform_data = &iclink_ov2640,
+       },
+};
+#endif
+
+
 /*
  * LCD Controller
  */
@@ -377,7 +444,12 @@ static struct gpio_led ek_pwm_led[] = {
 #endif
 };
 
-
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+       defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+       &isi_ov2640,
+#endif
+};
 
 static void __init ek_board_init(void)
 {
@@ -399,6 +471,8 @@ static void __init ek_board_init(void)
        ek_add_device_nand();
        /* I2C */
        at91_add_device_i2c(0, NULL, 0);
+       /* ISI, using programmable clock as ISI_MCK */
+       at91_add_device_isi(&isi_data, true);
        /* LCD Controller */
        at91_add_device_lcdc(&ek_lcdc_data);
        /* Touch Screen */
@@ -410,6 +484,8 @@ static void __init ek_board_init(void)
        /* LEDs */
        at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
        at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+       /* Other platform devices */
+       platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")